Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 21 Oct 2006 15:39:58 -0400
From:      Nicolas Blais <nb_root@videotron.ca>
To:        Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Asus A8V hangs during pci probe on fresh -CURRENT
Message-ID:  <200610211540.02844.nb_root@videotron.ca>
In-Reply-To: <20061021231535.M702@free.home.local>
References:  <200610211403.43055.nb_root@videotron.ca> <20061021231535.M702@free.home.local>

next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart17342336.eUBZ898Map
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

> It seems that VPD changes by jmg@ on Oct, 9th hangs in infinite loop
> with some PCIe (?) cards.
>
> 1. Can you check, what device is attached to this bus (with kernel before
> this changes, pci.c rev 1.314 or earlier)? Is it 'Realtek 8168/8111B PCIe
> Gigabit Ethernet'?
>
> 2. Do you have pci.c rev 1.315 or 1.316? I had serious problems (broken
> PCI ID) possible caused by patch similar to one in pci.c rev. 1.316.
>
> Yuriy.
>
> p.s. There is also discussion of the same problem on cvs-src/cvs-all.
> p.p.s. Please keep me in To/CC, I'm off-list for next two weeks.

1. Here's the list of things on pci0:
[nicblais@clk01a] /usr/src/sys/dev/pci> dmesg -a | grep pci0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
fwohci0: <VIA Fire II (VT6306)> port 0x9800-0x987f mem 0xf9800000-0xf98007f=
f=20
irq 16 at device 7.0 on pci0
atapci0: <Promise PDC20378 SATA150 controller> port=20
0xa800-0xa83f,0xa400-0xa40f,0xa000-0xa07f mem=20
0xf9a00000-0xf9a00fff,0xf9900000-0xf991ffff irq 18 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
bktr0: <BrookTree 878> mem 0xdfe00000-0xdfe00fff irq 16 at device 9.0 on pc=
i0
pci0: <multimedia> at device 9.1 (no driver attached)
skc0: <Marvell Gigabit Ethernet> port 0xb000-0xb0ff mem 0xf9c00000-0xf9c03f=
ff=20
irq 17 at device 10.0 on pci0
atapci1: <VIA 6420 SATA150 controller> port=20
0xd000-0xd007,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xb800-0xb80f,0xb40=
0-0xb4ff=20
irq 20 at device 15.0 on pci0
atapci2: <VIA 8237 UDMA133 controller> port=20
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.0=
 on=20
pci0
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.1=
 on=20
pci0
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.2=
 on=20
pci0
uhci3: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.3=
 on=20
pci0
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf9e00000-0xf9e000ff irq 21 at=
=20
device 16.4 on pci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
pcm0: <VIA VT8237> port 0xe800-0xe8ff irq 22 at device 17.5 on pci0

2. src/sys/dev/pci/pci.c,v 1.316 2006/10/20 21:28:11 jmg Exp $"); is the=20
version I have in my source tree right now. Since it is dated 20th of oct, =
I=20
can assume it is unrelated to the problem because last week (oct 14th) buil=
d=20
also showed the freeze.

Also, the A8V is not a PCIe system.

Nicolas.
=2D-=20
=46reeBSD 7.0-CURRENT #1: Sat Oct  7 15:11:02 EDT 2006    =20
root@clk01a:/usr/obj/usr/src/sys/CLK01A=20
PGP? : http://www.clkroot.net/security/nb_root.asc

--nextPart17342336.eUBZ898Map
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (FreeBSD)

iD8DBQBFOneS4wTBlvcsbJURAg/iAKCQ1TVjX3UC3+YSQqSt+dt386dNpwCgqhRD
Q1xmcnYyBy8Y6FfNCWbQdF8=
=q85T
-----END PGP SIGNATURE-----

--nextPart17342336.eUBZ898Map--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200610211540.02844.nb_root>