Date: Tue, 11 Nov 2003 16:17:46 -0600 (CST) From: Marc Rassbach <marc@milestonerdl.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/59192: ATA drive not spotted with SCSI drive Message-ID: <20031111161536.N55254@tandem.milestonerdl.com> Resent-Message-ID: <200311112250.hABMoMT1063483@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 59192 >Category: i386 >Synopsis: ATA drive not spotted with SCSI drive >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Nov 11 14:50:22 PST 2003 >Closed-Date: >Last-Modified: >Originator: Marc Rassbach >Release: FreeBSD 5.1-CURRENT i386 >Organization: Milestone R/D Labs >Environment: System: FreeBSD fire 5.1-CURRENT FreeBSD 5.1-CURRENT #1: Sun Nov 9 03:14:52 GMT 2003 marc@fire:/usr/obj/usr/src/sys/GENERIC i386 >Description: Mixed SCSI and IDE system. Sees SCSI drive, does not see IDE drive 4.8-RC1 on same hardware works as expected. Sees both drives, can 'play' with both drives. BIOS sees drive, BTW. fire# dmesg | more Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #1: Sun Nov 9 03:14:52 GMT 2003 marc@fire:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a73000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD-K6(tm) 3D processor (551.25-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 301989888 (288 MB) avail memory = 283693056 (270 MB) K6-family MTRR support enabled (2 registers) ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABL ES ACPI: table load failed: AE_NO_ACPI_TABLES npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00f7cd0 pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:16 INTA BIOS irq 11 pci_cfgintr: 0:20 INTA BIOS irq 9 agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AcerLabs Aladdin UDMA33 controller> port 0xffa0-0xffaf at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] dc0: <82c169 PNIC 10/100BaseTX> port 0xde00-0xdeff mem 0xdfffef00-0xdfffefff irq 11 at device 16.0 on pci0 dc0: Ethernet address: 00:a0:cc:40:ca:cf miibus0: <MII bus> on dc0 bmtphy0: <BCM5201 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdfffd000-0x dfffdfff irq 9 at device 20.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs orm0: <Option ROMs> at iomem 0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f 0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0a03> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) Timecounter "TSC" frequency 551251868 Hz quality 800 Timecounters tick every 10.000 msec acd0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED> acd0: CDROM <CD820E.1v78b9108> at ata1-master BIOSPIO Waiting 15 seconds for SCSI devices to settle GEOM: create disk da0 dp=0xc3152450 da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST118273LC 6246> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) Mounting root from ufs:/dev/da0s1a dc0: failed to force tx and rx to idle state dc0: failed to force tx and rx to idle state And the below is the dmesg from the same hardware with a 4.8 SCSI disk. $ dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RC #1: Sat Mar 15 19:44:28 GMT 2003 root@demobox.168.138.1:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (551.25-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 301989888 (294912K bytes) avail memory = 288153600 (281400K bytes) Preloaded elf kernel "kernel" at 0xc051d000. K6-family MTRR support enabled (2 registers) md0: Malloc disk Using $PIR table, 6 entries at 0xc00f7cd0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 0 chip0: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 dc0: <82c169 PNIC 10/100BaseTX> port 0xde00-0xdeff mem 0xdfffef00-0xdfffefff irq 11 at device 16.0 on pci0 dc0: Ethernet address: 00:a0:cc:40:ca:cf miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdfffd000-0x dfffdfff irq 9 at device 20.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata1-slave: ATAPI identify retries exceeded ad0: 8063MB <WDC AC38400L> [16383/16/63] at ata0-master UDMA33 acd0: CDROM <CD820E.1v78b9108> at ata1-master PIO3 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST118273LC 5702> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) $ >How-To-Repeat: For my hardware selection, seems presistant across reboots. >Fix: Unknown to me. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031111161536.N55254>