Date: Sun, 9 Apr 2006 10:00:55 +0000 From: vittorio <vdemart1@tin.it> To: freebsd-questions@freebsd.org Subject: Re: cdrecord on Thinkpad T43 Message-ID: <200604091000.56132.vdemart1@tin.it> In-Reply-To: <6e4453640604081222q66494870j3ba0a03996c2df5c@mail.gmail.com> References: <6e4453640604081222q66494870j3ba0a03996c2df5c@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
1) add or enable (uncommenting) the following lines to your kernel: device atapicam # isn't enable in the default kernel #SCSI Controllers device cd (cdrecord needs a SCSI cd emulation) 2) recompile the kernel It works on my thinkpad R51. Ciao Vittorio Alle 19:22, sabato 08 aprile 2006, Erin Sharmahd ha scritto: > I've been having some problems getting cdrecord to work on my thinkpad. > > http://www.mathematik.uni-marburg.de/~schmidtm/ibm/index.php says: > "To burn CDs with cdrecord don't forget to enable atapicam during > kernel configuration." > > In his kernel config, he used this with "device atapicd", so I ran: > [amon-re /root] cat /sys/i386/conf/GENERIC | grep atapicd > device atapicd # ATAPI CDROM drives > > In the past (on Linux), I had always used 'cdrecord dev=3D/dev/cdrom', > so I initially tried 'cdrecord dev=3D/dev/acd0', but I learned from > 'cdrecord dev=3Dhelp' that apparently "open via UNIX device" is not > supported. "SCSI Bus scanning" is supposed to be supported, but when > I run 'cdrecord -scanbus', it gives: > [amon-re /root] cdrecord -scanbus > Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 > J=F6rg Schilling > cdrecord: Error 0. Cannot open SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=3Dhelp'. > > (it would be nice if cdrecord -scanbus didn't tell me to run it > again... but that's a different issue) > > Here is some (hopefully) relevant information about my system: > > [amon-re /root] uname -a > FreeBSD amon-re 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #1: Sat Feb 11 > 21:55:30 MST 2006 zoot@amon-re:/usr/obj/usr/src/sys/GENERIC i386 > > [amon-re /root] sysctl -a | grep -i cd > kern.cam.cd.changer.min_busy_seconds: 5 > kern.cam.cd.changer.max_busy_seconds: 15 > allocdirect 4 1K - 79793 128 > acd_driver 1 2K - 1 2048 > cdev 31 4K - 31 128 > debug.sizeof.cdev: 184 > debug.sizeof.cdev_priv: 216 > dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT > dev.cbb.0.%location: slot=3D0 function=3D0 handle=3D\_SB_.PCI0.PCI1.CDBS > dev.acd.0.%desc: MATSHITADVD-RAM UJ-822S/1.61 > dev.acd.0.%driver: acd > dev.acd.0.%parent: ata1 > > [amon-re /root] dmesg | grep -i cd > acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 > acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.61> at ata1-master UDMA33 > > I'd appreciate any help that anyone can provide. I'm somewhat > stumped, and I'm not seeing much on google regarding this problem. > > Thanks! > ~Erin > > -- > http://www.tuxgirl.com > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604091000.56132.vdemart1>