Date: Sun, 27 Mar 2005 23:15:36 +0200 From: Mike Daemon <mike.daemon@gmail.com> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: more problems with 5.3 and "TIMEOUT - WRITE_DMA" Message-ID: <3db6da6d05032713157dac8a14@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
------=_Part_5141_12932611.1111958136531
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
I got this annoying problem when upgradeing to 5.3, the miniinst iso
blurps out "TIMEOUT - WRITE_DMA" when it starts writing base to my
disk. And when I tried to first install 5.2.1 and upgrade (cvsup, make
buildworld etc.. ) to 5.3 that way everything seems fine until I
reboot to single-user-mode, as soon as Im starting to write anything
to the disk it=B4s blurping out those errors.. I have diagnosticed my
disk, checked my cabling and fixed my PSU (installed a brand new one).
No difference. I noticed that my ide-controller was supported in 4.11,
but not? in 5.3, is that realy true? seems very strange...
Sence I duel boot with Wintendo/Lunix and don=B4t see this problem with
those oses I=B4m very confused of what to do next..
I=B4ll tried some snapshots to but no luck...=20
/ Mike
ps My dmesg goes in the attachment, in hope for a patch/solution to
this problem. ds
------=_Part_5141_12932611.1111958136531
Content-Type: text/plain; name="dmesg_fbsd5-2-1.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="dmesg_fbsd5-2-1.txt"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e6d000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0e6d244.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e6d288.
ACPI APIC Table: <ASUS P4S533 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.10-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4
Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory =3D 268419072 (255 MB)
avail memory =3D 246906880 (235 MB)
ioapic0 <Version 0.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S533 > on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1b10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 20 at
device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 23 at
device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
1.10/3.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
atapci0: <SiS 5513 UDMA33 controller> port 0xd800-0xd80f at device 2.5 on p=
ci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 5.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem
0xe5000000-0xe50000ff irq 17 at device 9.0 on pci0
rl0: Ethernet address: 00:c1:26:0e:fe:f5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2400095416 Hz quality 800
Timecounters tick every 10.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09e16d8
GEOM: create disk ad0 dp=3D0xc31ecd60
ad0: 19541MB <Maxtor 2B020H1> [39703/16/63] at ata0-master UDMA33
acd0: DVDR <_NEC DVD_RW ND-3500AG> at ata0-slave PIO4
GEOM: create disk ad2 dp=3D0xc3184960
ad2: 190782MB <ST3200822A> [387621/16/63] at ata1-master UDMA33
GEOM: create disk ad3 dp=3D0xc3184560
ad3: 58644MB <IC35L060AVV207-0> [119150/16/63] at ata1-slave UDMA33
Mounting root from ufs:/dev/md0
module_register: module pci/txp already exists!
Module pci/txp failed to register: 17
interface cd9660.1 already present in the KLD 'kernel'!
interface sysvmsg.1 already present in the KLD 'kernel'!
module_register: module pccard/xe already exists!
Module pccard/xe failed to register: 17
module_register: module pci/pcn already exists!
Module pci/pcn failed to register: 17
module_register: module pcn/miibus already exists!
Module pcn/miibus failed to register: 17
module_register: module pci/vr already exists!
Module pci/vr failed to register: 17
module_register: module vr/miibus already exists!
Module vr/miibus failed to register: 17
module_register: module pci/ste already exists!
Module pci/ste failed to register: 17
module_register: module ste/miibus already exists!
Module ste/miibus failed to register: 17
module_register: module if_tun already exists!
Module if_tun failed to register: 17
can't re-use a leaf (if_tun_debug)!
module_register: module uhub/cue already exists!
Module uhub/cue failed to register: 17
module_register: module cardbus/xl already exists!
Module cardbus/xl failed to register: 17
module_register: module pci/xl already exists!
Module pci/xl failed to register: 17
module_register: module xl/miibus already exists!
Module xl/miibus failed to register: 17
module_register: module pccard/ed already exists!
Module pccard/ed failed to register: 17
module_register: module ed/miibus already exists!
Module ed/miibus failed to register: 17
module_register: module pci/ed already exists!
Module pci/ed failed to register: 17
module_register: module isa/ed already exists!
Module isa/ed failed to register: 17
module_register: module pci/bge already exists!
Module pci/bge failed to register: 17
module_register: module bge/miibus already exists!
Module bge/miibus failed to register: 17
module_register: module pci/re already exists!
Module pci/re failed to register: 17
module_register: module cardbus/re already exists!
Module cardbus/re failed to register: 17
module_register: module re/miibus already exists!
Module re/miibus failed to register: 17
module_register: module pci/wb already exists!
Module pci/wb failed to register: 17
module_register: module wb/miibus already exists!
Module wb/miibus failed to register: 17
module_register: module pci/rl already exists!
Module pci/rl failed to register: 17
module_register: module cardbus/rl already exists!
Module cardbus/rl failed to register: 17
module_register: module rl/miibus already exists!
Module rl/miibus failed to register: 17
module_register: module pci/sis already exists!
Module pci/sis failed to register: 17
module_register: module sis/miibus already exists!
Module sis/miibus failed to register: 17
module_register: module cardbus/dc already exists!
Module cardbus/dc failed to register: 17
module_register: module pci/dc already exists!
Module pci/dc failed to register: 17
module_register: module dc/miibus already exists!
Module dc/miibus failed to register: 17
can't re-use a leaf (dc_quick)!
interface sysvshm.1 already present in the KLD 'kernel'!
module_register: module pci/bfe already exists!
Module pci/bfe failed to register: 17
module_register: module bfe/miibus already exists!
Module bfe/miibus failed to register: 17
module_register: module uhub/aue already exists!
Module uhub/aue failed to register: 17
module_register: module aue/miibus already exists!
Module aue/miibus failed to register: 17
interface miibus.1 already present in the KLD 'kernel'!
module_register: module pci/lnc already exists!
Module pci/lnc failed to register: 17
module_register: module isa/lnc already exists!
Module isa/lnc failed to register: 17
interface sysvsem.1 already present in the KLD 'kernel'!
module_register: module pccard/fe already exists!
Module pccard/fe failed to register: 17
module_register: module isa/fe already exists!
Module isa/fe failed to register: 17
module_register: module pci/fxp already exists!
Module pci/fxp failed to register: 17
module_register: module cardbus/fxp already exists!
Module cardbus/fxp failed to register: 17
module_register: module fxp/miibus already exists!
Module fxp/miibus failed to register: 17
can't re-use a leaf (fxp_rnr)!
can't re-use a leaf (fxp_noflow)!
module_register: module uhub/kue already exists!
Module uhub/kue failed to register: 17
module_register: module pci/sf already exists!
Module pci/sf failed to register: 17
module_register: module sf/miibus already exists!
Module sf/miibus failed to register: 17
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 21 21 4 4
done
Uptime: 8m15s
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a35244.
ACPI APIC Table: <ASUS P4S533 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.09-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4
Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory =3D 268419072 (255 MB)
avail memory =3D 251088896 (239 MB)
ioapic0 <Version 0.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S533 > on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1b10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 20 at
device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 23 at
device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
1.10/3.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
atapci0: <SiS 5513 UDMA33 controller> port 0xd800-0xd80f at device 2.5 on p=
ci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 5.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem
0xe5000000-0xe50000ff irq 17 at device 9.0 on pci0
rl0: Ethernet address: 00:c1:26:0e:fe:f5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2400093028 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=3D0xc2da3a60
ad0: 19541MB <Maxtor 2B020H1> [39703/16/63] at ata0-master UDMA33
acd0: DVDR <_NEC DVD_RW ND-3500AG> at ata0-slave PIO4
GEOM: create disk ad2 dp=3D0xc2e41460
ad2: 190782MB <ST3200822A> [387621/16/63] at ata1-master UDMA33
GEOM: create disk ad3 dp=3D0xc2e41060
ad3: 58644MB <IC35L060AVV207-0> [119150/16/63] at ata1-slave UDMA33
Mounting root from ufs:/dev/ad2s1a
cd9660: RockRidge Extension
cd9660: RockRidge Extension
cd9660: RockRidge Extension
------=_Part_5141_12932611.1111958136531--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3db6da6d05032713157dac8a14>