From owner-freebsd-mobile Wed Sep 10 16:58:16 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA08368 for mobile-outgoing; Wed, 10 Sep 1997 16:58:16 -0700 (PDT) Received: from rigel.cs.pdx.edu (root@rigel.cs.pdx.edu [204.203.64.22]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA08362 for ; Wed, 10 Sep 1997 16:58:10 -0700 (PDT) Received: from draco.cs.pdx.edu (root@draco.cs.pdx.edu [204.203.67.102]) by rigel.cs.pdx.edu (8.8.6/8.8.6) with ESMTP id QAA19494 for ; Wed, 10 Sep 1997 16:58:05 -0700 (PDT) Received: from localhost (dreeder@localhost [127.0.0.1]) by draco.cs.pdx.edu (8.8.6/8.8.6) with ESMTP id QAA27513 for ; Wed, 10 Sep 1997 16:58:03 -0700 (PDT) Message-Id: <199709102358.QAA27513@draco.cs.pdx.edu> To: freebsd-mobile@freebsd.org Subject: X config on a Toshiba 420 vs. a 460 Date: Wed, 10 Sep 1997 16:58:02 -0700 From: David Reeder Sender: owner-freebsd-mobile@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I'de like to upgrade my Toshiba Satellite Pro 420cdt to a 460cdt. I assume I can just copy my /etc/XF86Config from one machine to the other, but does anyone know otherwise? I found specs at http://www.toshiba.com/tais/csd/products/pspecs2/main.htm. Both the 440 and 460 are Chips and Technologies HiQVideo (65554 and 65555, respectively), but the graphics controller is not listed for the 420 and 430. Toshiba told me that the 420 C&T was numbered 65550. Certainly the difference between the 460 and the 420 can't be enough to require a new X config? Or, at least it should be simply procedural to build a new one with xf86config? If anyone knows different, please let me know. Thanks much, David Reeder Portland State University