From owner-freebsd-questions Tue Aug 3 6:26:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from Dolinca.IBC.IskraSistemi.Si (Dolinca.IBC.IskraSistemi.Si [194.249.213.241]) by hub.freebsd.org (Postfix) with ESMTP id D2C7E15142 for ; Tue, 3 Aug 1999 06:26:30 -0700 (PDT) (envelope-from brodnik@Dolinca.IBC.IskraSistemi.Si) Received: (from brodnik@localhost) by Dolinca.IBC.IskraSistemi.Si (8.8.8/8.8.7) id PAA24143 for freebsd-questions@FreeBSD.ORG; Tue, 3 Aug 1999 15:34:20 +0200 (CEST) (envelope-from brodnik) From: Andrej Brodnik (Andy) Message-Id: <199908031334.PAA24143@Dolinca.IBC.IskraSistemi.Si> Subject: Overloading my machine? To: freebsd-questions@FreeBSD.ORG Date: Tue, 3 Aug 1999 15:34:20 +0200 (CEST) Organization: IBC, Iskra Systems Reply-To: Andrej.Brodnik@IBC.IskraSistemi.SI (Andrej Brodnik (Andy)) X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi there, I want to put on my machine the following HW (I'll be running FBSD-3.2) beside the usual HW (serial and parallel ports etc.): - three IDE disks - floppy - IDE CD-ROM - three ep NIC - Adaptec PCI bus SCSI adapter Now, this is not a lot of burden (I think) for the processor, but I'm a bit afraid about the architecture. Will this work? In particular, I'm worried about the interrupts. Any suggestions how to configure them? Thanx in advance for your assistance! LPA PS: Here is dmesg for the current FBSD which doesn't have SCSI adapter installed. ---------------------------------------------------------------------- Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.8-STABLE #0: Wed Jan 20 13:08:03 MET 1999 root@Irena.IskraSistemi.Si:/usr/ports/FreeBSD-src/sys/compile/IRENA CPU: Pentium/P54C (166.19-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 134217728 (131072K bytes) avail memory = 129335296 (126304K bytes) Probing for devices on PCI bus 0: chip0 rev 3 on pci0:0:0 chip1 rev 1 on pci0:7:0 chip2 rev 0 on pci0:7:1 pci0:7:2: Intel Corporation, device=0x7020, class=serial, subclass=0x03 int d irq 11 [no driver assigned] vga0 rev 64 on pci0:19:0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <4 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S wdc1: unit 1 (wd3): wd3: 2503MB (5126688 sectors), 5086 cyls, 16 heads, 63 S/T, 512 B/S 3 3C5x9 board(s) on ISA found at 0x300 0x260 0x280 ep0 at 0x300-0x30f irq 10 on isa ep0: aui/utp/bnc[*BNC*] address 00:60:97:3a:73:bf ep1 at 0x280-0x28f irq 5 on isa ep1: aui/utp/bnc[*BNC*] address 00:a0:24:dd:96:fe ep2 at 0x260-0x26f irq 11 on isa ep2: utp[*UTP*] address 00:60:97:4e:e5:93 npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message