Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 1 Jan 2012 13:26:59 -0600
From:      Jeffrey McFadden <junkrigsailor@gmail.com>
To:        Rotate 13 <rabgvzr@gmail.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: axe(4) and Plugable USB2-E1000 (or: general USB Ethernet advice)
Message-ID:  <CAFpTYWPskGuonmCGvRQjf1xAbwe_==0fTxBtQBPjuL%2BsK1nSLA@mail.gmail.com>
In-Reply-To: <CADBSp1e0vHpo_K-r3cE7__tX9D_pUcsvejtuw2GRyAdwzg=0uA@mail.gmail.com>
References:  <CADBSp1e0vHpo_K-r3cE7__tX9D_pUcsvejtuw2GRyAdwzg=0uA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jan 1, 2012 at 10:26 AM, Rotate 13 <rabgvzr@gmail.com> wrote:

> I am looking for a USB ethernet adapter which works with very stable
> driver in FreeBSD.  To effect this end, I went through section 4 man
> pages, and made list of drivers for USB ethernet chips.  The problem
> is, many are apparently not widely available or in current production
> - but I found ASIX AX88178 and ASIX AX88772 (axe(4)) in various
> devices from http://plugable.com/ .  I am mostly interested in ASIX
> AX88178 due to faster speed (albeit limited by USB2 speed).
>
> My questions:
>
>        * Does anybody have good or bad experience with Plugable USB2-E1000
> (ASIX AX88178) in FreeBSD?  Stability is utmost concern, followed by
> performance.  I note, Amazon.com page for product says also it has
> Realtek RTL8211CL PHY - I do not understand why, and cannot find info
> explaining this.  Is perhaps slower USB2-E100 with ASIX AX88772 more
> compatible?
>
>        * Any advice on rock-solid usage of USB Ethernet in FreeBSD, and
> pointers to other products will be much appreciated.ss G USB
>

I can't address your other questions, but the Belkin Wireless G USB adapter
model FSD7050 is working without fail for me, and last I knew was still on
the market.

Jeff

>
> Thanks in advance.
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFpTYWPskGuonmCGvRQjf1xAbwe_==0fTxBtQBPjuL%2BsK1nSLA>