Date: Sat, 26 Nov 2005 10:18:51 -0600 From: Kevin Day <toasty@dragondata.com> To: freebsd-acpi@FreeBSD.org Subject: ACPI hang on 6.0-RELEASE on Compaq Proliant ML530 (866MHz Xeon) Message-ID: <5A00483D-8A89-4180-B982-0F9437198200@dragondata.com>
next in thread | raw e-mail | index | archive | help
Hangs on boot after displaying kernel copyright notice with ACPI enabled. Works fine with ACPI disabled. Server has two CPUs, but hang occurs with or without SMP kernel. acpidump at http://www.dragondata.com/~toasty/toasty-ml530.asl dmesg from working config: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC MPTable: <COMPAQ PROLIANT > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III Xeon (863.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147467264 (2047 MB) avail memory = 2096672768 (1999 MB) ioapic0: Changing APIC ID to 8 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-34 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <base peripheral> at device 3.0 (no driver attached) pci0: <display, VGA> at device 5.0 (no driver attached) pci0: <simple comms> at device 8.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib2: <MPTable Host-PCI bridge> pcibus 2 on motherboard pci2: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x3000-0x303f mem 0xf7ee0000-0xf7efffff irq 24 at device 6.0 on pci2 em0: Ethernet address: 00:07:e9:13:5c:82 em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x3040-0x307f mem 0xf7ec0000-0xf7edffff irq 24 at device 6.1 on pci2 em1: Ethernet address: 00:07:e9:13:5c:83 em1: Speed:N/A Duplex:N/A pcib255: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 255 on motherboard pci255: <PCI bus> on pcib255 pcib5: <MPTable Host-PCI bridge> pcibus 5 on motherboard pci5: <PCI bus> on pcib5 sym0: <896> port 0x4000-0x40ff mem 0xf7fffc00-0xf7ffffff, 0xf7ffc000-0xf7ffdfff irq 22 at device 4.0 on pci5 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: [GIANT-LOCKED] sym1: <896> port 0x4400-0x44ff mem 0xf7ffbc00-0xf7ffbfff, 0xf7ff8000-0xf7ff9fff irq 21 at device 4.1 on pci5 sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking sym1: [GIANT-LOCKED] eisa0: <EISA bus> on motherboard mainboard0: <CPQ0712 (System Board)> on eisa0 slot 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff, 0xee000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863936862 Hz quality 800 Timecounters tick every 1.000 msec acd0: CDROM <Compaq CRD-8402B/1.03> at ata0-master PIO4 Waiting 5 seconds for SCSI devices to settle da1 at sym0 bus 0 target 2 lun 0 da1: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) da0 at sym0 bus 0 target 0 lun 0 da0: <COMPAQ BD01864552 3B08> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C) da2 at sym0 bus 0 target 3 lun 0 da2: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da2: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C) da3 at sym0 bus 0 target 4 lun 0 da3: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da3: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) da4 at sym0 bus 0 target 5 lun 0 da4: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da4: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) Trying to mount root from ufs:/dev/da0s1a em0: link state changed to UP em0: promiscuous mode enabled em0: promiscuous mode disabled em0: promiscuous mode enabled em0: promiscuous mode disabled Let me know if there's any more info I can provide, if anyone is interested in looking at this.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5A00483D-8A89-4180-B982-0F9437198200>