Date: Wed, 27 May 2009 18:57:13 +0000 (UTC) From: Bruce M Simpson <bms@FreeBSD.org> To: cvs-src-old@freebsd.org Subject: cvs commit: src/share/man/man4 Makefile multicast.4 src/sys/netinet6 icmp6.c in6.h in6_mcast.c ip6_input.c mld6.c src/usr.sbin/ifmcstat ifmcstat.8 ifmcstat.c Message-ID: <200905271859.n4RIx8tS067896@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
bms 2009-05-27 18:57:13 UTC
FreeBSD src repository
Modified files:
share/man/man4 Makefile multicast.4
sys/netinet6 icmp6.c in6.h in6_mcast.c ip6_input.c
mld6.c
usr.sbin/ifmcstat ifmcstat.8 ifmcstat.c
Log:
SVN rev 192923 on 2009-05-27 18:57:13Z by bms
Merge final round of MLD changes from p4:
ip6_input.c, in6.h:
* Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6.
* Always set this flag if HBH Router Alert option is present for MLD,
even when not forwarding.
icmp6.c:
* In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent.
* Use scope ID for verifying input. Do not apply SSM filters here, no inpcb.
* Check for M_RTALERT_MLD when validating MLD traffic, as we can't see
IPv6 hop options outside of ip6_input().
in6_mcast.c:
* Use KAME scope/zone ID in in6_multi.
* Update net.inet6.ip6.mcast.filters implementation to use scope IDs
for comparisons.
* Fix scope ID treatment in multicast socket option processing.
Scope IDs passed in from userland will be ignored as other less
ambiguous APIs exist for specifying the link.
* Tighten userland input checks in IPv6 SSM delta and full-state ops.
* Source filter embedded scope IDs need to be revisited, for now
just clear them and ignore them on input.
* Adapt KAME behaviour of looking up the scope ID in the default zone
for multicast leaves, when the interface is ambiguous.
mld6.c:
* Tighten origin checks on MLD traffic as per RFC3810 Section 6.2:
* ip6_src MAY be the unspecified address for MLDv1 reports.
* ip6_src MAY have link-local address scope for MLDv1 reports,
MLDv1 queries, and MLDv2 queries.
* Perform address field validation *before* accepting queries.
* Use KAME scope/zone ID in query/report processing.
* Break const correctness for mld_v1_input_report(), mld_v1_input_query()
as we temporarily modify the input mbuf chain.
* Clear the scope ID before handoff to userland MLD daemon.
* Fix MLDv1 old querier present timer processing.
With the protocol defaults, hosts should revert to MLDv2 after 260s.
* Add net.inet6.mld.v1enable sysctl, default to on.
ifmcstat.c:
* Use sysctl by default; -K requests kvm(3) if so compiled.
mld.4:
* Connect man page to build.
Tested using PCS.
Revision Changes Path
1.451 +1 -0 src/share/man/man4/Makefile
1.9 +4 -1 src/share/man/man4/multicast.4
1.108 +25 -20 src/sys/netinet6/icmp6.c
1.56 +1 -0 src/sys/netinet6/in6.h
1.5 +132 -71 src/sys/netinet6/in6_mcast.c
1.121 +14 -2 src/sys/netinet6/ip6_input.c
1.49 +199 -73 src/sys/netinet6/mld6.c
1.13 +10 -12 src/usr.sbin/ifmcstat/ifmcstat.8
1.24 +2 -2 src/usr.sbin/ifmcstat/ifmcstat.c
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200905271859.n4RIx8tS067896>