Date: Mon, 14 Feb 2000 23:20:54 -0500 (EST) From: "Eric D. Futch" <efutch@nyct.net> To: freebsd-questions@freebsd.org Subject: CD-R Hell Message-ID: <Pine.BSF.4.05.10002142307010.14888-100000@bsd1.nyct.net>
next in thread | raw e-mail | index | archive | help
Please reply to me directly, I'm not on the -questions mailing list. I'm going through hell trying to get my external Ricoh RW7060S CD-RW drive (I know.. this drive sucks) to burn CD's again. I worked for a week or so and I haven't touched anything. Now when I try to burn CD's, I get "Media Errors". I tried all the obvious things, different recording speeds, moving the internal cable away from powered things, different cables, terminators, CD's (both CD-R and CD-RW), rebooting, and even moved the CD-RW drive to a Windows box (ugh!) so I could flash it with new firmware. It always bails out in a different spot even with the same CD in the drive. It's strange as hell and I'm just short of ripping apart my equipment or throwing this CD-RW drive into the garbage. If anyone has any clues, let me know. Of course, remember that I'm not a complete idiot and I have everything all taken care of config wise, this WAS working a week ago. # uname -a FreeBSD quake.nyct.net 3.4-STABLE FreeBSD 3.4-STABLE #9: Tue Feb 1 20:56:42 EST 2000 efutch@quake.nyct.net:/usr/src/sys/compile/QUAKE i386 # camcontrol devlist <SEAGATE ST39173W 6244> at scbus0 target 0 lun 0 (pass0,da0) < CD-R/RW RW7060S 1.70> at scbus0 target 3 lun 0 (cd0,pass1) <IOMEGA ZIP 100 J.03> at scbus1 target 6 lun 0 (pass2,da1) # camcontrol inquiry 0:3 pass1: < CD-R/RW RW7060S 1.70> Removable CD-ROM SCSI-2 device pass1: Serial Number [ pass1: 3.300MB/s transfers # cdrecord dev=3,0 speed=6 -dummy install-i386.iso Cdrecord 1.8a40 (i386-unknown-freebsd3.4) Copyright (C) 1995-2000 Jrg Schilling cdrecord: No such file or directory. WARNING: RR-scheduler not available, disabling. scsidev: '3,0' scsibus: 0 target: 3 lun: 0 Using libscg version 'schily-0.1' Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : ' ' Identifikation : 'CD-R/RW RW7060S ' Revision : '1.70' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO cdrecord: Undefined error: 0. WARNING: RR-scheduler not available, disabling. Starting to write CD/DVD at speed 6 in dummy mode for single session. Last chance to quit, starting dummy write in 1 seconds. cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 BB 17 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 00 B8 97 0C 00 00 00 00 0C 00 00 00 00 00 0C 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 47255 (valid) resid: 63488 cmd finished after 2.111s timeout 40s write track data: error after 98088960 bytes Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00 cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 00 B8 97 0C 00 00 00 00 0C 00 00 00 00 00 0C 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 47255 (valid) cmd finished after 5.255s timeout 120s Trouble flushing the cache Here goes the 2nd run... # cdrecord dev=3,0 speed=6 -dummy install-i386.iso Cdrecord 1.8a40 (i386-unknown-freebsd3.4) Copyright (C) 1995-2000 Jrg Schilling cdrecord: No such file or directory. WARNING: RR-scheduler not available, disabling. scsidev: '3,0' scsibus: 0 target: 3 lun: 0 Using libscg version 'schily-0.1' Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : ' ' Identifikation : 'CD-R/RW RW7060S ' Revision : '1.70' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO cdrecord: WARNING: Data may not fit on current disk. cdrecord: Undefined error: 0. WARNING: RR-scheduler not available, disabling. Starting to write CD/DVD at speed 6 in dummy mode for single session. Last chance to quit, starting dummy write in 1 seconds. cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 FA 93 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 00 F7 FD 0C 00 00 00 00 0C 00 00 00 00 00 0C 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 63485 (valid) resid: 63488 cmd finished after 1.995s timeout 40s write track data: error after 34283520 bytes Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00 cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 00 F7 FD 0C 00 00 00 00 0C 00 00 00 00 00 0C 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 63485 (valid) cmd finished after 5.171s timeout 120s Trouble flushing the cache -- Eric Futch New York Connect.Net, Ltd. efutch@nyct.net Technical Support Staff http://www.nyct.net (212) 293-2620 "Bringing New York The Internet Access It Deserves" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.10002142307010.14888-100000>