Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 20 May 2015 13:02:11 -0400
From:      Arjan van der Velde <vandervelde.ag@gmail.com>
To:        freebsd-arm@freebsd.org
Subject:   Re: [Patch v1] [BeagleBone Black] port the latest u-boot-2014-01
Message-ID:  <BD851055-6B28-440D-BD78-A1107F66AD2D@gmail.com>
In-Reply-To: <81FF0940-10BF-4771-B982-C1D1D3C83941@gmail.com>
References:  <81FF0940-10BF-4771-B982-C1D1D3C83941@gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Im sorry, this was in response to an old thread. I have used the latest =
beaglebone FreeBSD snapshot (of 10.1) and copied the image to eMMC of my =
beaglebone black, using the copy-to-emms.sh script. However, u-boot =
seems unable to find the boot device. I'm not sure as to where I should =
start looking.

Thanks for your help.

-- Arjan

My partitions are as follows:

root@beaglebone:~ # gpart show mmcsd1
=3D>     63  7552961  mmcsd1  MBR  (3.6G)
       63     4095       1  !12  [active]  (2.0M)
     4158  7548849       2  freebsd  (3.6G)
  7553007       17          - free -  (8.5K)

root@beaglebone:~ # mount -t msdosfs /dev/mmcsd1s1 /mnt
root@beaglebone:~ # ll /mnt
total 729
-rwxr-xr-x  1 root  wheel  357652 May 20 11:40 bb-uboot.img*
-rwxr-xr-x  1 root  wheel      19 May 20 12:35 bb-uenv.txt*
-rwxr-xr-x  1 root  wheel   15838 May 20 11:40 bbone.dtb*
-rwxr-xr-x  1 root  wheel   10051 May 20 11:40 bbone.dts*
-rwxr-xr-x  1 root  wheel   16284 May 20 11:40 bboneblk.dtb*
-rwxr-xr-x  1 root  wheel   10548 May 20 11:40 bboneblk.dts*
-rwxr-xr-x  1 root  wheel  251606 May 20 11:40 bbubldr*
-rwxr-xr-x  1 root  wheel   82136 May 20 11:40 mlo*

root@beaglebone:~ # umount /mnt/
root@beaglebone:~ # mount /dev/mmcsd1s2a /mnt
root@beaglebone:~ # ll /mnt
total 29620
-rw-r--r--   2 root  wheel          964 Apr 28 00:57 .cshrc
-rw-r--r--   2 root  wheel          252 Apr 28 00:57 .profile
drwxrwxr-x   2 root  operator       512 Apr 28 00:56 .snap/
-r--------   1 root  wheel     30212096 May 20 11:40 .sujournal
-r--r--r--   1 root  wheel         6195 Apr 28 00:57 COPYRIGHT
drwxr-xr-x   2 root  wheel         1024 Apr 28 00:56 bin/
drwxr-xr-x   9 root  wheel         1024 Apr 28 00:57 boot/
dr-xr-xr-x   2 root  wheel          512 May 20 11:42 dev/

etc.




On May 20, 2015, at 12:44 PM, Arjan van der Velde wrote:

> Hello. Have you been able to solve this problem? I'm stuck with the =
same thing. I seem unable to boot the 10.1 image from emmc.
>=20
> U-Boot 2014.04 (Apr 28 2015 - 04:56:05)
>=20
> I2C:   ready
> DRAM:  512 MiB
> MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Using default environment
>=20
> Net:   <ethaddr> not set. Validating first E-fuse MAC
> cpsw, usb_ether
> Hit any key to stop autoboot:  0
> Card did not respond to voltage select!
> mmc0(part 0) is current device
> Card did not respond to voltage select!
> mmc1(part 0) is current device
> SD/MMC found on device 1
> reading bb-uEnv.txt
> 19 bytes read in 3 ms (5.9 KiB/s)
> Loaded environment from bb-uEnv.txt
> Importing environment from mmc ...
> reading bbubldr
> 251606 bytes read in 16 ms (15 MiB/s)
> reading bboneblk.dtb
> 16284 bytes read in 4 ms (3.9 MiB/s)
> ## Starting application at 0x88000054 ...
> Consoles: U-Boot console
> Compatible U-Boot API signature found @9f635510
>=20
> FreeBSD/armv6 U-Boot loader, Revision 1.2
> (root@releng1.nyi.freebsd.org, Tue Apr 28 04:56:01 UTC 2015)
>=20
> DRAM: 512MB
> Card did not respond to voltage select!
> Card did not respond to voltage select!
> Number of U-Boot devices: 1
> U-Boot env: loaderdev=3D'mmc1:2.0'
> Found U-Boot device: net
> No boot device found!
> ## Application terminated, rc =3D 0xbadef1ce
> ## Error: "nandboot" not defined
> U-Boot#
>=20
>=20




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BD851055-6B28-440D-BD78-A1107F66AD2D>