Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 15 Sep 2022 11:24:12 +0200
From:      Maurizio Vairani <maurizio1018@gmail.com>
To:        freebsd-stable@freebsd.org
Subject:   Upgrading an i386 from 12.3p6 to 13.1-RELEASE it hangs after rebooting in the new kernel.
Message-ID:  <CAN0zgYXT-wq_jyox=m2HUFkxrbenYbju%2BOF3bNTg78xRcAAtUw@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
--0000000000009df37705e8b3cf17
Content-Type: text/plain; charset="UTF-8"

Using the instruction at
https://www.freebsd.org/releases/13.1R/installation/
following: Upgrading Using "FreeBSD Update",
the system hangs after rebooting in the new kernel.

The system boots, but at the console, repetitiously print the message:
"CPU0: local APIC error 0x4"

I can only switch off the PC.

I have tested the system with these two images:
FreeBSD-13.1-STABLE-i386-20220819-6ecf086d5a0-252127-mini-memstick.img
FreeBSD-14.0-CURRENT-i386-20220819-545db925c3d-257513-mini-memstick.img
but it hangs with the above message.

The output of the dmesg command of the working FreeBSD 12.3p6.:
---<<BOOT>>---
mptable_probe: MP Config Table has bad signature: d 98
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-RELEASE-p6 GENERIC i386
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git
llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: AMD Athlon(tm) XP 2000+ (1536.85-MHz 686-class CPU)
  Origin="AuthenticAMD"  Id=0x6a0  Family=0x6  Model=0xa  Stepping=0

Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
real memory  = 1073741824 (1024 MB)
avail memory = 1003597824 (957 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <Nvidia AWRDACPI>
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC" frequency 1536849151 Hz quality 800
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD
14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD
14.0.
kbd1 at kbdmux0
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD
14.0.
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0x14dd4b0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> on hostb0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD
14.0.
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> mem 0xed084000-0xed084fff irq 20 at
device 2.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xed085000-0xed085fff irq 21 at
device 2.1 on pci0
usbus1 on ohci1
ehci0: <NVIDIA nForce2 USB 2.0 controller> mem 0xed086000-0xed0860ff irq 22
at device 2.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
nfe0: <NVIDIA nForce2 MCP2 Networking Adapter> port 0xc000-0xc007 mem
0xed083000-0xed083fff irq 20 at device 4.0 on pci0
miibus0: <MII bus> on nfe0
icsphy0: <ICS1893 10/100 media interface> PHY 1 on miibus0
icsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: Ethernet address: 00:00:00:60:15:3e
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pcm0: <nVidia nForce2> port 0xb000-0xb0ff,0xb400-0xb47f mem
0xed080000-0xed080fff irq 22 at device 6.0 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <VIA 6421 SATA150 controller> port
0x9000-0x900f,0x9400-0x940f,0x9800-0x980f,0x9c00-0x9c0f,0xa000-0xa01f,0xa400-0xa4ff
irq 18 at device 6.0 on pci1
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
atapci1: <nVidia nForce2 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem
0xeb000000-0xebffffff,0xe0000000-0xe3ffffff,0xe4000000-0xe407ffff irq 16 at
device 0.0 on pci2
vgapci0: Boot video device
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd7fff,0xd8000-0xd97ff pnpid
ORM0000 on isa0
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <nVidia EHCI root HUB> at usbus2
uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <nVidia OHCI root HUB> at usbus1
uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <nVidia OHCI root HUB> at usbus0
uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:qbic/ROOT/12.3-RELEASE-p7_2022-09-13_205331
[]...
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 CAM
Root mount waiting for: usbus2 CAM
uhub0: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 CAM
Root mount waiting for: usbus2 CAM
ugen2.2: <Kingston DataTraveler 3.0> at usbus2
umass0 on uhub0
umass0: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/11.76, addr 2> on
usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:5:0: Attached to scbus5
Root mount waiting for: usbus2 CAM
Root mount waiting for: usbus2 CAM
ugen2.3: <Kingston DataTraveler 3.0> at usbus2
umass1 on uhub0
umass1: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/11.76, addr 3> on
usbus2
umass1:  SCSI over Bulk-Only; quirks = 0x8100
umass1:6:1: Attached to scbus6
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD4000AAJS-22TKA0 12.01C01> ATA-7 SATA 2.x device
ada0: Serial Number WD-WCAPW1730388
ada0: 150.000MB/s transfers (SATA 1.x, UDMA4, PIO 8192bytes)
ada0: 381554MB (781422768 512 byte sectors)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Kingston DataTraveler 3.0 1.00> Removable Direct Access SPC-4 SCSI
device
da0: Serial Number 08606E69C773309039650204
da0: 40.000MB/s transfers
da0: 14800MB (30310400 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim1 bus 1 scbus6 target 0 lun 0
da1: <Kingston DataTraveler 3.0 1.00> Removable Direct Access SPC-4 SCSI
device
da1: Serial Number 60A44C3FAC043090397A0202
da1: 40.000MB/s transfers
da1: 14800MB (30310400 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD
14.0.
lo0: link state changed to UP
nfe0: link state changed to DOWN
nfe0: link state changed to UP
--
Regards
Maurizio

--0000000000009df37705e8b3cf17
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Using the instruction at <a href=3D"https://www.freebsd.or=
g/releases/13.1R/installation/">https://www.freebsd.org/releases/13.1R/inst=
allation/</a><br>following: Upgrading Using &quot;FreeBSD Update&quot;,<br>=
the system hangs after rebooting in the new kernel.<br><br>The system boots=
, but at the console, repetitiously print the message:<br>&quot;CPU0: local=
 APIC error 0x4&quot;<br><br>I can only switch off the PC.<br><br>I have te=
sted the system with these two images:<br>FreeBSD-13.1-STABLE-i386-20220819=
-6ecf086d5a0-252127-mini-memstick.img<br>FreeBSD-14.0-CURRENT-i386-20220819=
-545db925c3d-257513-mini-memstick.img<br>but it hangs with the above messag=
e.<br><br><div>The output of the dmesg command of the working FreeBSD 12.3p=
6.:</div><div>---&lt;&lt;BOOT&gt;&gt;---<br>mptable_probe: MP Config Table =
has bad signature: d 98<br>Copyright (c) 1992-2021 The FreeBSD Project.<br>=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br=
>	The Regents of the University of California. All rights reserved.<br>Free=
BSD is a registered trademark of The FreeBSD Foundation.<br>FreeBSD 12.3-RE=
LEASE-p6 GENERIC i386<br>FreeBSD clang version 10.0.1 (git@github.com:llvm/=
llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)<br>VT(vga): resolution 640x=
480<br>CPU: AMD Athlon(tm) XP 2000+ (1536.85-MHz 686-class CPU)<br>=C2=A0 O=
rigin=3D&quot;AuthenticAMD&quot; =C2=A0Id=3D0x6a0 =C2=A0Family=3D0x6 =C2=A0=
Model=3D0xa =C2=A0Stepping=3D0<br>=C2=A0 Features=3D0x383fbff&lt;FPU,VME,DE=
,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE&=
gt;<br>=C2=A0 AMD Features=3D0xc0400800&lt;SYSCALL,MMX+,3DNow!+,3DNow!&gt;<=
br>real memory =C2=A0=3D 1073741824 (1024 MB)<br>avail memory =3D 100359782=
4 (957 MB)<br>Event timer &quot;LAPIC&quot; quality 100<br>ACPI APIC Table:=
 &lt;Nvidia AWRDACPI&gt;<br>random: unblocking device.<br>ioapic0 &lt;Versi=
on 1.1&gt; irqs 0-23 on motherboard<br>Timecounter &quot;TSC&quot; frequenc=
y 1536849151 Hz quality 800<br>random: entropy device external interface<br=
>WARNING: Device &quot;g_ctl&quot; is Giant locked and may be deleted befor=
e FreeBSD 14.0.<br>WARNING: Device &quot;kbd&quot; is Giant locked and may =
be deleted before FreeBSD 14.0.<br>kbd1 at kbdmux0<br>WARNING: Device &quot=
;pci&quot; is Giant locked and may be deleted before FreeBSD 14.0.<br>[ath_=
hal] loaded<br>module_register_init: MOD_LOAD (vesa, 0x14dd4b0, 0) error 19=
<br>nexus0<br>vtvga0: &lt;VT VGA driver&gt; on motherboard<br>cryptosoft0: =
&lt;software crypto&gt; on motherboard<br>acpi0: &lt;Nvidia AWRDACPI&gt; on=
 motherboard<br>acpi0: Power Button (fixed)<br>cpu0: &lt;ACPI CPU&gt; on ac=
pi0<br>attimer0: &lt;AT timer&gt; port 0x40-0x43 irq 0 on acpi0<br>Timecoun=
ter &quot;i8254&quot; frequency 1193182 Hz quality 0<br>Event timer &quot;i=
8254&quot; frequency 1193182 Hz quality 100<br>atrtc0: &lt;AT realtime cloc=
k&gt; port 0x70-0x73 irq 8 on acpi0<br>atrtc0: registered as a time-of-day =
clock, resolution 1.000000s<br>Event timer &quot;RTC&quot; frequency 32768 =
Hz quality 0<br>Timecounter &quot;ACPI-fast&quot; frequency 3579545 Hz qual=
ity 900<br>acpi_timer0: &lt;24-bit timer at 3.579545MHz&gt; port 0x4008-0x4=
00b on acpi0<br>acpi_button0: &lt;Power Button&gt; on acpi0<br>pcib0: &lt;A=
CPI Host-PCI bridge&gt; port 0xcf8-0xcff on acpi0<br>pci0: &lt;ACPI PCI bus=
&gt; on pcib0<br>agp0: &lt;NVIDIA nForce2 AGP Controller&gt; on hostb0<br>W=
ARNING: Device &quot;agp&quot; is Giant locked and may be deleted before Fr=
eeBSD 14.0.<br>pci0: &lt;memory, RAM&gt; at device 0.1 (no driver attached)=
<br>pci0: &lt;memory, RAM&gt; at device 0.2 (no driver attached)<br>pci0: &=
lt;memory, RAM&gt; at device 0.3 (no driver attached)<br>pci0: &lt;memory, =
RAM&gt; at device 0.4 (no driver attached)<br>pci0: &lt;memory, RAM&gt; at =
device 0.5 (no driver attached)<br>isab0: &lt;PCI-ISA bridge&gt; at device =
1.0 on pci0<br>isa0: &lt;ISA bus&gt; on isab0<br>ohci0: &lt;OHCI (generic) =
USB controller&gt; mem 0xed084000-0xed084fff irq 20 at device 2.0 on pci0<b=
r>usbus0 on ohci0<br>ohci1: &lt;OHCI (generic) USB controller&gt; mem 0xed0=
85000-0xed085fff irq 21 at device 2.1 on pci0<br>usbus1 on ohci1<br>ehci0: =
&lt;NVIDIA nForce2 USB 2.0 controller&gt; mem 0xed086000-0xed0860ff irq 22 =
at device 2.2 on pci0<br>usbus2: EHCI version 1.0<br>usbus2 on ehci0<br>nfe=
0: &lt;NVIDIA nForce2 MCP2 Networking Adapter&gt; port 0xc000-0xc007 mem 0x=
ed083000-0xed083fff irq 20 at device 4.0 on pci0<br>miibus0: &lt;MII bus&gt=
; on nfe0<br>icsphy0: &lt;ICS1893 10/100 media interface&gt; PHY 1 on miibu=
s0<br>icsphy0: =C2=A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, =
auto-flow<br>nfe0: Ethernet address: 00:00:00:60:15:3e<br>pci0: &lt;multime=
dia, audio&gt; at device 5.0 (no driver attached)<br>pcm0: &lt;nVidia nForc=
e2&gt; port 0xb000-0xb0ff,0xb400-0xb47f mem 0xed080000-0xed080fff irq 22 at=
 device 6.0 on pci0<br>pcm0: &lt;Avance Logic ALC650 AC97 Codec&gt;<br>pcib=
1: &lt;ACPI PCI-PCI bridge&gt; at device 8.0 on pci0<br>pci1: &lt;ACPI PCI =
bus&gt; on pcib1<br>atapci0: &lt;VIA 6421 SATA150 controller&gt; port 0x900=
0-0x900f,0x9400-0x940f,0x9800-0x980f,0x9c00-0x9c0f,0xa000-0xa01f,0xa400-0xa=
4ff irq 18 at device 6.0 on pci1<br>ata2: &lt;ATA channel&gt; at channel 0 =
on atapci0<br>ata3: &lt;ATA channel&gt; at channel 1 on atapci0<br>ata4: &l=
t;ATA channel&gt; at channel 2 on atapci0<br>atapci1: &lt;nVidia nForce2 UD=
MA133 controller&gt; port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f=
 at device 9.0 on pci0<br>ata0: &lt;ATA channel&gt; at channel 0 on atapci1=
<br>ata1: &lt;ATA channel&gt; at channel 1 on atapci1<br>pci0: &lt;serial b=
us, FireWire&gt; at device 13.0 (no driver attached)<br>pcib2: &lt;ACPI PCI=
-PCI bridge&gt; at device 30.0 on pci0<br>pci2: &lt;ACPI PCI bus&gt; on pci=
b2<br>vgapci0: &lt;VGA-compatible display&gt; mem 0xeb000000-0xebffffff,0xe=
0000000-0xe3ffffff,0xe4000000-0xe407ffff irq 16 at device 0.0 on pci2<br>vg=
apci0: Boot video device<br>acpi_tz0: &lt;Thermal Zone&gt; on acpi0<br>fdc0=
: &lt;floppy drive controller&gt; port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acp=
i0<br>fd0: &lt;1440-KB 3.5&quot; drive&gt; on fdc0 drive 0<br>uart0: &lt;16=
550 or compatible&gt; port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0<br>uart1: =
&lt;16550 or compatible&gt; port 0x2f8-0x2ff irq 3 on acpi0<br>ppc0: &lt;Pa=
rallel port&gt; port 0x378-0x37f,0x778-0x77b irq 7 on acpi0<br>ppc0: Generi=
c chipset (NIBBLE-only) in COMPATIBLE mode<br>ppbus0: &lt;Parallel port bus=
&gt; on ppc0<br>lpt0: &lt;Printer&gt; on ppbus0<br>lpt0: Interrupt-driven p=
ort<br>ppi0: &lt;Parallel I/O&gt; on ppbus0<br>atkbdc0: &lt;Keyboard contro=
ller (i8042)&gt; port 0x60,0x64 irq 1 on acpi0<br>atkbd0: &lt;AT Keyboard&g=
t; irq 1 on atkbdc0<br>kbd0 at atkbd0<br>atkbd0: [GIANT-LOCKED]<br>orm0: &l=
t;ISA Option ROMs&gt; at iomem 0xd0000-0xd7fff,0xd8000-0xd97ff pnpid ORM000=
0 on isa0<br>ZFS NOTICE: Prefetch is disabled by default on i386 -- to enab=
le,<br>=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 add &quot;vfs.zfs.prefetch=
_disable=3D0&quot; to /boot/loader.conf.<br>ZFS filesystem version: 5<br>ZF=
S storage pool version: features support (5000)<br>Timecounters tick every =
1.000 msec<br>usbus0: 12Mbps Full Speed USB v1.0<br>usbus1: 12Mbps Full Spe=
ed USB v1.0<br>usbus2: 480Mbps High Speed USB v2.0<br>ugen2.1: &lt;nVidia E=
HCI root HUB&gt; at usbus2<br>uhub0: &lt;nVidia EHCI root HUB, class 9/0, r=
ev 2.00/1.00, addr 1&gt; on usbus2<br>ugen1.1: &lt;nVidia OHCI root HUB&gt;=
 at usbus1<br>uhub1: &lt;nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, ad=
dr 1&gt; on usbus1<br>ugen0.1: &lt;nVidia OHCI root HUB&gt; at usbus0<br>uh=
ub2: &lt;nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1&gt; on usbu=
s0<br>Trying to mount root from zfs:qbic/ROOT/12.3-RELEASE-p7_2022-09-13_20=
5331 []...<br>uhub1: 3 ports with 3 removable, self powered<br>uhub2: 3 por=
ts with 3 removable, self powered<br>Root mount waiting for: usbus2 CAM<br>=
Root mount waiting for: usbus2 CAM<br>uhub0: 6 ports with 6 removable, self=
 powered<br>Root mount waiting for: usbus2 CAM<br>Root mount waiting for: u=
sbus2 CAM<br>ugen2.2: &lt;Kingston DataTraveler 3.0&gt; at usbus2<br>umass0=
 on uhub0<br>umass0: &lt;Kingston DataTraveler 3.0, class 0/0, rev 2.10/11.=
76, addr 2&gt; on usbus2<br>umass0: =C2=A0SCSI over Bulk-Only; quirks =3D 0=
x8100<br>umass0:5:0: Attached to scbus5<br>Root mount waiting for: usbus2 C=
AM<br>Root mount waiting for: usbus2 CAM<br>ugen2.3: &lt;Kingston DataTrave=
ler 3.0&gt; at usbus2<br>umass1 on uhub0<br>umass1: &lt;Kingston DataTravel=
er 3.0, class 0/0, rev 2.10/11.76, addr 3&gt; on usbus2<br>umass1: =C2=A0SC=
SI over Bulk-Only; quirks =3D 0x8100<br>umass1:6:1: Attached to scbus6<br>R=
oot mount waiting for: CAM<br>Root mount waiting for: CAM<br>Root mount wai=
ting for: CAM<br>Root mount waiting for: CAM<br>Root mount waiting for: CAM=
<br>Root mount waiting for: CAM<br>Root mount waiting for: CAM<br>ada0 at a=
ta2 bus 0 scbus0 target 0 lun 0<br>ada0: &lt;WDC WD4000AAJS-22TKA0 12.01C01=
&gt; ATA-7 SATA 2.x device<br>ada0: Serial Number WD-WCAPW1730388<br>ada0: =
150.000MB/s transfers (SATA 1.x, UDMA4, PIO 8192bytes)<br>ada0: 381554MB (7=
81422768 512 byte sectors)<br>da0 at umass-sim0 bus 0 scbus5 target 0 lun 0=
<br>da0: &lt;Kingston DataTraveler 3.0 1.00&gt; Removable Direct Access SPC=
-4 SCSI device<br>da0: Serial Number 08606E69C773309039650204<br>da0: 40.00=
0MB/s transfers<br>da0: 14800MB (30310400 512 byte sectors)<br>da0: quirks=
=3D0x2&lt;NO_6_BYTE&gt;<br>da1 at umass-sim1 bus 1 scbus6 target 0 lun 0<br=
>da1: &lt;Kingston DataTraveler 3.0 1.00&gt; Removable Direct Access SPC-4 =
SCSI device<br>da1: Serial Number 60A44C3FAC043090397A0202<br>da1: 40.000MB=
/s transfers<br>da1: 14800MB (30310400 512 byte sectors)<br>da1: quirks=3D0=
x2&lt;NO_6_BYTE&gt;<br>WARNING: Device &quot;spkr&quot; is Giant locked and=
 may be deleted before FreeBSD 14.0.<br>lo0: link state changed to UP<br>nf=
e0: link state changed to DOWN<br>nfe0: link state changed to UP</div><div>=
--</div>Regards<div>Maurizio<br></div><br><br></div>

--0000000000009df37705e8b3cf17--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN0zgYXT-wq_jyox=m2HUFkxrbenYbju%2BOF3bNTg78xRcAAtUw>