Date: Sat, 31 Aug 2013 18:17:38 +0600 From: =?koi8-r?B?59XM0cXXIOfP28E=?= <gosha-necr@yandex.ru> To: =?utf-8?B?SmVhbi1Tw6liYXN0aWVuIFDDqWRyb24=?= <dumbbell@freebsd.org>, "freebsd-x11@freebsd.org" <freebsd-x11@freebsd.org> Subject: Re: [REPORT] AMD Radeon KMS on Asus X501U Message-ID: <195671377951458@web2g.yandex.ru> In-Reply-To: <52219CB1.607@FreeBSD.org> References: <521C9D2A.4070001@FreeBSD.org> <423811377880731@web23g.yandex.ru> <5220DC43.2060300@daemonic.se> <42821377921354@web10m.yandex.ru> <52219CB1.607@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
31.08.2013, 13:35, "Jean-Sébastien Pédron" <dumbbell@FreeBSD.org>:
Le 31/08/2013 05:55, ÐÑлÑев ÐоÑа a écrit :
     But Xorg not starts, below that Xorg.0.log
Could you please send the output of dmesg after trying to start X?
Yes, that is:
============= dmesg after trying Xorg ====================
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Sat Aug 31 08:03:00 CET 2013
goshanecr@TEST:/usr/obj/usr/src/sys/BSDSERV amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD E-450 APU with Radeon(tm) HD Graphics (1647.04-MHz K8-class
CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2
Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SK
INIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 1634627584 (1558 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero
address or length: 0x0000000000000000/0x1 (20130823/tbfadt-630)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x3, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem
0xb0000000-0xbfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on
pci0
hdac0: <ATI (0x1314) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 19
at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeb48000-0xfeb49fff
irq 18 at device 16.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
usbus0 on xhci0
ahci0: <AMD Hudson-2 AHCI SATA controller> port
0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f
mem 0xfeb4f000-0xfeb4f7ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xfeb4e000-0xfeb4efff irq 18
at device 18.0 on pci0
usbus1 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff
irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18
at device 19.0 on pci0
usbus3 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff
irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <AMD ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f at device 20.1 on
pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xfeb40000-0xfeb43fff
irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <PCI-PCI bridge> at device 20.4 on pci0
pci2: <PCI bus> on pcib2
sdhci_pci0: <Generic SD HCI> mem 0xfeb4a000-0xfeb4a0ff irq 16 at device
20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci6: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0xd000-0xd0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at
device 0.0 on pci6
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on
miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 30:85:a9:7a:08:93
pcib5: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci7: <ACPI PCI bus> on pcib5
ath0: <Atheros AR9485> mem 0xfe900000-0xfe97ffff irq 19 at device 0.0
on pci7
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC270 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC270 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC270 (Internal Analog)> at nid 20 and 25 on hdaa1
pcm2: <Realtek ALC270 (Right Analog Headphones)> at nid 26 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <0x1022> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
usbus0
ugen4.1: <AMD> at usbus4
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <AMD> at usbus3
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <AMD> at usbus2
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <AMD> at usbus1
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen4.2: <Azurewave> at usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST320LT020-9YG142 0001SDM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1647038739 Hz quality 800
ugen3.2: <Atheros Communications> at usbus3
Trying to mount root from ufs:/dev/ada0a [rw]...
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Wrestler [Radeon HD 6320]> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (PALM 0x1002:0x9806
0x1043:0x14B7).
info: [drm] register mmio base: 0xFEB00000
info: [drm] register mmio size: 262144
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this
method...
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table:
AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xb0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800b0000000
(262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x5407
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xb0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800b0000000
(262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x5407
error: [drm:pid881:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
drmn0: error: Fatal error during GPU init
info: [drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized
device_attach: drmn0 attach returned 22
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
--
Jean-Sébastien Pédron
_______________________________________________
[1]freebsd-x11@freebsd.org mailing list
[2]http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to
"[3]freebsd-x11-unsubscribe@freebsd.org"
Â
Â
--------------------------------------------
С Ñважением, ÐÑлÑев ÐоÑа.
References
1. mailto:freebsd-x11@freebsd.org
2. http://lists.freebsd.org/mailman/listinfo/freebsd-x11
3. mailto:freebsd-x11-unsubscribe@freebsd.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?195671377951458>