Date: Mon, 17 Sep 2012 12:41:10 +0200 From: Kurt Jaeger <lists@c0mplx.org> To: YongHyeon PYUN <pyunyh@gmail.com> Cc: freebsd-current@FreeBSD.org Subject: Re: Call for bge(4) testers Message-ID: <20120917104110.GX3324-v2@home.opsec.eu> Resent-Message-ID: <20120917104436.GA5897@home.opsec.eu> In-Reply-To: <20120914212716.GB7612@michelle.cdnetworks.com> References: <20120914212716.GB7612@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! > There were lots of reports that stock bge(4) does not work on Dell > Rx20/HP DL 360 G8. I tested it with 9.1-RC1 amd64 on a HP DL 360 G8. Without the patch, bge0 did not work (timeouts etc). With the patch, bge0 does work: bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 on pci3 bge0: APE FW version: NCSI v1.0.88.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: ac:16:2d:77:22:88 pci0:3:0:1: failed to read VPD data. > box. I'm especially interested in whether there is any ASF/IPMI > regression on BCM570x/571x. Any ipmi-specific tests I should make ? -- pi@opsec.eu +49 171 3101372 8 years to go !
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120917104110.GX3324-v2>