Date: Fri, 4 Jan 2019 18:16:29 +0100 From: Ruben <mail@osfux.nl> To: Kurt Jaeger <pi@freebsd.org>, Michael Steinmann <support@pcengines.ch> Cc: freebsd-stable@freebsd.org Subject: Re: APU2, legacy firmware 4.0.22, FreeBSD 12.0 hangs in boot Message-ID: <9909d7f5-d92a-3c0a-d6bb-e7b43c4367f3@osfux.nl> In-Reply-To: <20181217103847.GT25709@fc.opsec.eu> References: <20181215200040.GO25709@fc.opsec.eu> <CAAX=mVNJAHgZ-DoQsFzWX7enyH=vAc4GMZx-k2fApj1g1v7=-Q@mail.gmail.com> <20181217103847.GT25709@fc.opsec.eu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Has there been any progress on this? I'm asking because I'd very much like to upgrade my apu's to FreeBSD 12 as well! Kind regards, Ruben On 12/17/18 11:38 AM, Kurt Jaeger wrote: > Hi! > >> Our developers ask for the full log you could provide. > > Below the boot1 with 4.0.22, that stalled. > > And the boot2, with 4.8.0.5, that worked. > > Serial Number: 1086158 > > -------------boot1----------- > coreboot build 20180312 > BIOS version v4.0.22 > 4080 MB ECC DRAM > > SeaBIOS (version rel-1.11.0.7-0-gdc51f90) > > Press F10 key now for boot menu > > Booting from Hard Disk... > //bboooott//ccoonnffiigg:: --DDhh --SS11115522000 > > 0 > > > > CCoonnssoolleess:: iinntteerrnnaall vviiddeeoo//kkeeyybbooaarrdd sseerriiaall ppoorrtt > > BBIIOOSS ddrriivvee CC:: iiss ddiisskk00 > > ||// --\\||//-- \\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\ ||//--\\||//BBIIOOSS 663399kkBB//33666688779922kkBB aavvaaiillaabbllee mmeemmoorryy > > > > FFrreeeeBBSSDD//xx8866 bboooottssttrraapp llooaaddeerr,, RReevviissiioonn 11..11 > > --\\||//-- \\||//--\\||//--\\||//--\\|| //--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//-- \\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\ ||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\ ||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||// --\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\|| //--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||// --\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\|| //--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\|| //--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\|| //LLooaaddiinngg //bboooott//ddeeffaauullttss//llooaaddeerr..ccoonnff > > LLooaaddiinngg //bboooott//ddeevviiccee..hhiinnttss > > --\\||//--\\||//--\\ LLooaaddiinngg //bboooott//llooaaddeerr..ccoonnff > > ||//--\\||//--\\||//Loading /boot/loader.conf.local > ``` ` s` `.....---.......--.``` -/ +o .--` /y:` +. yo`:. :o `+- y/ -/` -o/ .- ::/sy+:. / `-- / `: :` `: :` / / .- -. -- -. `:` `:` .-- `--. .---.....----. ______ ____ _____ _____ | ____| | _ \ / ____| __ \ | |___ _ __ ___ ___ | |_) | (___ | | | | | ___| '__/ _ \/ _ \| _ < \___ \| | | | | | | | | __/ __/| |_) |____) | |__| | | | | | | | || | | | |_| |_| \___|\___||____/|_____/|_____/ �Ȼ����������������������������������������������������������������������������������ͺ�����������������������Welcome to FreeBSD1. Boot Multi user [Enter]2. Boot Single user3. Escape to loader prompt4. RebootOptions:5. Kernel: default/2kernel (1 of 1)6. Boot OptionsAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 8 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 7 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 6 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 5 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 4 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 3 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 2 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 1 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop > Loading kernel... > /boot/kernel/kernel text=0x1678a68 data=0x1cd288+0x768b40 syms=[0x8+0x174cd8+0x8+0x19224a] > Loading configured modules... > /boot/entropy size=0x1000 > /boot/kernel/zfs.ko size 0x3a9a10 at 0x263e000 > loading required module 'opensolaris' > /boot/kernel/opensolaris.ko size 0xa4f0 at 0x29e8000 > ---<<BOOT>>--- > Copyright (c) 1992-2018 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 12.0-RELEASE r341666 GENERIC amd64 > FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) > VT(vga): resolution 640x480 > CPU: AMD GX-412TC SOC (998.15-MHz K8-class CPU) > Origin="AuthenticAMD" Id=0x730f01 Family=0x16 Model=0x30 Stepping=1 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> > AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> > AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> > Structured Extended Features=0x8<BMI1> > XSAVE Features=0x1<XSAVEOPT> > SVM: NP,NRIP,AFlush,DAssist,NAsids=8 > TSC: P-state invariant, performance statistics > real memory = 4815060992 (4592 MB) > avail memory = 4092137472 (3902 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <CORE COREBOOT> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > random: unblocking device. > ioapic1: Changing APIC ID to 5 > ioapic0 <Version 2.1> irqs 0-23 on motherboard > ioapic1 <Version 2.1> irqs 24-55 on motherboard > Launching APs: 3 2 1 > Timecounter "TSC" frequency 998150199 Hz quality 1000 > random: entropy device external interface > kbd0 at kbdmux0 > netmap: loaded module > [ath_hal] loaded > module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 > nexus0 > vtvga0: <VT VGA driver> on motherboard > cryptosoft0: <software crypto> on motherboard > acpi0: <CORE COREBOOT> on motherboard > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > > ---------------boot2------------- > > PC Engines apu2 > coreboot build 20180410 > BIOS version v4.8.0.5 > 4080 MB ECC DRAM > > SeaBIOS (version rel-1.11.0.5-0-gd34c797) > > Press F10 key now for boot menu > > Booting from Hard Disk... > /boot/config: -h -S115200 > > Consoles: serial port > BIOS drive C: is disk0 > > > BIOS 639kB/3405412kB available memory > > FreeBSD/x86 bootstrap loader, Revision 1.1 > Loading /boot/defaults/loader.conf > Loading /boot/device.hints > Loading /boot/loader.conf > Loading /boot/loader.conf.local > ``` ` s` `.....---.......--.``` -/ +o .--` /y:` +. yo`:. :o `+- y/ -/` -o/ .- ::/sy+:. / `-- / `: :` `: :` / / .- -. -- -. `:` `:` .-- `--. .---.....----. ______ ____ _____ _____ | ____| | _ \ / ____| __ \ | |___ _ __ ___ ___ | |_) | (___ | | | | | ___| '__/ _ \/ _ \| _ < \___ \| | | | | | | | | __/ __/| |_) |____) | |__| | | | | | | | || | | | |_| |_| \___|\___||____/|_____/|_____/ �Ȼ����������������������������������������������������������������������������������ͺ�����������������������Welcome to FreeBSD1. Boot Multi user [Enter]2. Boot Single user3. Escape to loader prompt4. RebootOptions:5. Kernel: default/2kernel (1 of 1)6. Boot OptionsAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 8 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 7 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 6 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 5 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 4 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 3 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 2 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 1 seconds, hit [Enter] to boot or any other key to stop > Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop > Loading kernel... > /boot/kernel/kernel text=0x1678a68 data=0x1cd288+0x768b40 syms=[0x8+0x174cd8+0x8+0x19224a] > Loading configured modules... > /boot/kernel/zfs.ko size 0x3a9a10 at 0x263d000 > loading required module 'opensolaris' > /boot/kernel/opensolaris.ko size 0xa4f0 at 0x29e7000 > /boot/entropy size=0x1000 > ---<<BOOT>>--- > Copyright (c) 1992-2018 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 12.0-RELEASE r341666 GENERIC amd64 > FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) > VT(vga): resolution 640x480 > CPU: AMD GX-412TC SOC (998.16-MHz K8-class CPU) > Origin="AuthenticAMD" Id=0x730f01 Family=0x16 Model=0x30 Stepping=1 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> > AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> > AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> > Structured Extended Features=0x8<BMI1> > XSAVE Features=0x1<XSAVEOPT> > SVM: NP,NRIP,AFlush,DAssist,NAsids=8 > TSC: P-state invariant, performance statistics > real memory = 5083496448 (4848 MB) > avail memory = 4084031488 (3894 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <CORE COREBOOT> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > random: unblocking device. > ioapic1: Changing APIC ID to 5 > ioapic0 <Version 2.1> irqs 0-23 on motherboard > ioapic1 <Version 2.1> irqs 24-55 on motherboard > Launching APs: 2 1 3 > Timecounter "TSC" frequency 998157729 Hz quality 1000 > random: entropy device external interface > kbd0 at kbdmux0 > netmap: loaded module > [ath_hal] loaded > module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 > nexus0 > vtvga0: <VT VGA driver> on motherboard > cryptosoft0: <software crypto> on motherboard > acpi0: <CORE COREBOOT> on motherboard > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0 > pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff > pci1: <ACPI PCI bus> on pcib1 > igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 28 at device 0.0 on pci1 > igb0: attach_pre capping queues at 4 > igb0: using 1024 tx descriptors and 1024 rx descriptors > igb0: msix_init qsets capped at 4 > igb0: pxm cpus: 4 queue msgs: 4 admincnt: 1 > igb0: using 4 rx queues 4 tx queues > igb0: Using MSIX interrupts with 5 vectors > igb0: allocated for 4 tx_queues > igb0: allocated for 4 rx_queues > igb0: Ethernet address: 00:0d:b9:42:4c:38 > igb0: netmap queues/slots: TX 4/1024, RX 4/1024 > pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0 > pci2: <ACPI PCI bus> on pcib2 > igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2000-0x201f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 32 at device 0.0 on pci2 > igb1: attach_pre capping queues at 4 > igb1: using 1024 tx descriptors and 1024 rx descriptors > igb1: msix_init qsets capped at 4 > igb1: pxm cpus: 4 queue msgs: 4 admincnt: 1 > igb1: using 4 rx queues 4 tx queues > igb1: Using MSIX interrupts with 5 vectors > igb1: allocated for 4 tx_queues > igb1: allocated for 4 rx_queues > igb1: Ethernet address: 00:0d:b9:42:4c:39 > igb1: netmap queues/slots: TX 4/1024, RX 4/1024 > pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0 > pci3: <ACPI PCI bus> on pcib3 > igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3000-0x301f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff at device 0.0 on pci3 > igb2: attach_pre capping queues at 4 > igb2: using 1024 tx descriptors and 1024 rx descriptors > igb2: msix_init qsets capped at 4 > igb2: pxm cpus: 4 queue msgs: 4 admincnt: 1 > igb2: using 4 rx queues 4 tx queues > igb2: Using MSIX interrupts with 5 vectors > igb2: allocated for 4 tx_queues > igb2: allocated for 4 rx_queues > igb2: Ethernet address: 00:0d:b9:42:4c:3a > igb2: netmap queues/slots: TX 4/1024, RX 4/1024 > pcib4: <ACPI PCI-PCI bridge> at device 2.5 on pci0 > pci4: <ACPI PCI bus> on pcib4 > ath0: <Atheros 9280> mem 0xf7c00000-0xf7c0ffff at device 0.0 on pci4 > [ath] enabling AN_TOP2_FIXUP > ath0: [HT] enabling HT modes > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9280 mac 128.2 RF5133 phy 13.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > pci0: <encrypt/decrypt> at device 8.0 (no driver attached) > xhci0: <AMD FCH USB 3.0 controller> mem 0xf7fa2000-0xf7fa3fff irq 18 at device 16.0 on pci0 > xhci0: 32 bytes context size, 64-bit DMA > xhci0: Unable to map MSI-X table > usbus0 on xhci0 > usbus0: 5.0Gbps Super Speed USB v3.0 > ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7fa5000-0xf7fa53ff at device 17.0 on pci0 > ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ehci0: <AMD FCH USB 2.0 controller> mem 0xf7fa6000-0xf7fa60ff irq 18 at device 19.0 on pci0 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > usbus1: 480Mbps High Speed USB v2.0 > isab0: <PCI-ISA bridge> at device 20.3 on pci0 > isa0: <ISA bus> on isab0 > sdhci_pci0: <Generic SD HCI> mem 0xf7fa7000-0xf7fa70ff at device 20.7 on pci0 > sdhci_pci0: 1 slot(s) allocated > orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0 > uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 > uart0: console (115200,n,8,1) > uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. > uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 > uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. > hwpstate0: <Cool`n'Quiet 2.0> on cpu0 > ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; > to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > ugen1.1: <AMD EHCI root HUB> at usbus1 > ugen0.1: <0x1022 XHCI root HUB> at usbus0 > uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <Crucial CT480M500SSD3 MU03> ACS-2 ATA SATA 3.x device > ada0: Serial Number 14110C0A1FDA > ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 457862MB (937703088 512 byte sectors) > ada0: quirks=0x2<NCQ_TRIM_BROKEN> > Trying to mount root from zfs:zroot/ROOT/default []... > Root mount waiting for: usbus1 usbus0 > uhub1: 4 ports with 4 removable, self powered > uhub0: 2 ports with 2 removable, self powered > Root mount waiting for: usbus1 > ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 > uhub2 on uhub0 > uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 > uhub2: 4 ports with 4 removable, self powered > Setting hostuuid: 7b24996a-00a1-11e9-bb83-000db9424c38. > Setting hostid: 0x93cb9069. > Starting file system checks: > Mounting local filesystems:. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/mysql /usr/local/lib/perl5/5.28/mach/CORE > 32-bit compatibility ldconfig path: /usr/lib32 > Setting hostname: a3.opsec.eu. > Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > Feeding entropy: . > lo0: link state changed to UP > Starting Network: lo0 igb0 igb1 igb2. > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > inet 127.0.0.1 netmask 0xff000000 > groups: lo > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > igb0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:0d:b9:42:4c:38 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:0d:b9:42:4c:39 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > igb2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:0d:b9:42:4c:3a > inet 193.105.105.174 netmask 0xffffffc0 broadcast 193.105.105.191 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > Starting devd. > Starting Network: igb0. > igb0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:0d:b9:42:4c:38 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > Starting Network: igb1. > igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:0d:b9:42:4c:39 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > igb2: link state changed to UP > Autoloading module: intpm.ko > intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 > smbus0: <System Management Bus> on intsmb0 > add host 127.0.0.1: gateway lo0 fib 0: route already in table > add net default: gateway 193.105.105.190 > add host ::1: gateway lo0 fib 0: route already in table > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled > Flushed all rules. > 00100 allow ip from any to any via lo0 > 00200 deny ip from any to 127.0.0.0/8 > 00300 deny ip from 127.0.0.0/8 to any > 00400 deny ip from any to ::1 > 00500 deny ip from ::1 to any > 00600 allow ipv6-icmp from :: to ff02::/16 > 00700 allow ipv6-icmp from fe80::/10 to fe80::/10 > 00800 allow ipv6-icmp from fe80::/10 to ff02::/16 > 00900 allow ipv6-icmp from any to any icmp6types 1 > 01000 allow ipv6-icmp from any to any icmp6types 2,135,136 > 65000 allow ip from any to any > Firewall rules loaded. > Creating and/or trimming log files. > Starting syslogd. > No core dumps found. > Clearing /tmp (X related). > Updating motd:. > Mounting late filesystems:. > Configuring vt: blanktime. > Performing sanity check on sshd configuration. > Starting sshd. > Starting cron. > Starting background file system checks in 60 seconds. > > Sat Dec 15 22:07 > FreeBSD/amd64 (...) (ttyu0) > > login: > --------------- > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9909d7f5-d92a-3c0a-d6bb-e7b43c4367f3>