Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 4 Dec 2012 09:29:45 +0100
From:      Mats Mellstrand <mats@exmandato.se>
To:        Daisuke Aoyama <aoyama@peach.ne.jp>
Cc:        freebsd-arm@freebsd.org
Subject:   Re: FreeBSD on Raspberry Pi 512MB (with U-Boot + ubldr)
Message-ID:  <299DFD4A-9B11-4D0B-A024-AEC50B3CEF3F@exmandato.se>
In-Reply-To: <640A8F330E574984A36EC46EE4AFC1E7@ad.peach.ne.jp>
References:  <3988C1622A974F19A9D3888F0334FF10@ad.peach.ne.jp> <50B8058C.9030909@bluezbox.com> <E1TfWh4-00BZ82-Is@smtp.hs-karlsruhe.de> <B3D30A45699E443399D7CB112082356B@ad.peach.ne.jp> <18DB98C9-66D9-4B00-989A-156F21E9981C@bsdimp.com> <1354552432.1140.28.camel@revolution.hippie.lan> <797FC9C0D52846548418B1E8F70A0402@ad.peach.ne.jp> <640A8F330E574984A36EC46EE4AFC1E7@ad.peach.ne.jp>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi

The image boots fine.

Thanks

/Mats

On 4 dec 2012, at 00:22, Daisuke Aoyama <aoyama@peach.ne.jp> wrote:

> Updated to RPI-B-test4 kernel and SVN 243792.
>=20
> Still NOT STABLE!!
>=20
> The kernel is replaced with non-optimized version.
> Add GPT partition support.
> Add U-Boot SD card workaround.
>=20
> You can download my test binary from:
>=20
> http://www.peach.ne.jp/archives/rpi/freebsd-pi-20121204.img.gz
>=20
> SHA256 (freebsd-pi-20121204.img.gz) =3D =
13df40c567a486601d9e68ac5b8b2c0be778ac9625befa7d7cada616bbc2fa29
>=20
> Download and decompress it, then write it to SD.
> This image requires SD 4GB or more.
> I'm using as headless. So, you need a serial console for seeing the =
boot log.
> If you need to change the value on it, please mount the second =
partition (e.g. /dev/da0s2a).
> If you want the video out, please remove the line of "set =
console=3Dcomconsole" in /boot/loader.rc.
>=20
> Note: first time, it takes about 2 minutes for generating the SSH =
keys.
>=20
> Using config is here:
> http://www.peach.ne.jp/archives/rpi/config/RPI-B-test4
>=20
> Pre configured for:
>=20
> MEM 496MB/GPU 16MB/SWAP 512MB
> I/O: serial console
> IP address: 192.168.1.240
> Default router: 192.168.1.1
> DNS: 192.168.1.1
> sshd: enabled
>=20
> User: pi
> Password: raspberry
> Password(root): raspberry
> --=20
> Daisuke Aoyama
>=20
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?299DFD4A-9B11-4D0B-A024-AEC50B3CEF3F>