Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 12 Jan 2006 22:37:45 +0100
From:      =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@deepcore.dk>
To:        Christian Brueffer <chris@unixpages.org>
Cc:        current@FreeBSD.ORG
Subject:   Re: PATCH: DMA enabled dump for ATA please test
Message-ID:  <43C6CC29.9000208@deepcore.dk>
In-Reply-To: <20060112211629.GB54099@haakonia.hitnet.RWTH-Aachen.DE>
References:  <43C59717.7000203@FreeBSD.org> <20060112194325.GA54099@haakonia.hitnet.RWTH-Aachen.DE> <43C6B9B0.2030106@deepcore.dk> <20060112211629.GB54099@haakonia.hitnet.RWTH-Aachen.DE>

next in thread | previous in thread | raw e-mail | index | archive | help
Christian Brueffer wrote:
> On Thu, Jan 12, 2006 at 09:18:56PM +0100, Søren Schmidt wrote:
> 
>>Christian Brueffer wrote:
>>
>>
>>>I have tested this on my Thinkpad T41p with the following hardware:
>>>
>>>atapci0: <Intel ICH4 UDMA100 controller> port 
>>>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
>>>ata0: <ATA channel 0> on atapci0
>>>ata1: <ATA channel 1> on atapci0
>>>[...]
>>>ad0: 57231MB <HTS726060M9AT00 MH4OA6DA> at ata0-master UDMA100
>>>acd0: CDRW <UJDA755yDVD/CDRW/1.72> at ata1-master UDMA33
>>>
>>>With the patched kernel it stops after printing the acd0 line and spews
>>>out the following:
>>>
>>>acd0: req=0xc350f8d0 TEST_UNIT_READY semaphore timeout  !!  DANGER Will 
>>>Robinson  !!
>>>
>>>Do you need boot -v output? (I'll have to hook up a serial or firewire
>>>console, that's why I haven't provided it already).
>>
>>Would be nice actually, the stinkpads might need special treatment yet 
>>again, oh well, I'll dig out my R30 and get it updated as well to test...
>>Are you sure it worked with a new stock current kernel before the patch 
>>went in ? I've seen a few of these errors lately but that was before ATA 
>>was even touched, so something else might have changed as well....
>>
> 
> 
> Positive, built the patched kernel from the same sources as the working
> kernel I'm currently using.
> 
> Verbose bootlog: http://people.freebsd.org/~brueffer/dmesg.verbose

Hmm, does it help if you turn off DMA to the CD/DVD device ?
My R30 seems to work fine, but its CDROM drive doesn't do DMA...

-Søren



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43C6CC29.9000208>