From owner-freebsd-stable  Wed Dec 19  5:25:16 2001
Delivered-To: freebsd-stable@freebsd.org
Received: from vortex.wa4phy.net (cc449817-a.mrtnz1.ga.home.com [24.12.79.51])
	by hub.freebsd.org (Postfix) with ESMTP id 934DF37B416
	for <freebsd-stable@freebsd.org>; Wed, 19 Dec 2001 05:24:58 -0800 (PST)
Received: from vortex.wa4phy.net (localhost.wa4phy.net [127.0.0.1])
	by vortex.wa4phy.net (8.11.6/8.11.6) with ESMTP id fBJDNu318224;
	Wed, 19 Dec 2001 08:23:57 -0500 (EST)
	(envelope-from sam@wa4phy.net)
Message-ID: <3C2094EC.8A9A50F@vortex.wa4phy.net>
Date: Wed, 19 Dec 2001 08:23:56 -0500
From: Sam Drinkard <sam@wa4phy.net>
Organization: You Gotta Be Kiddin!
X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.4-STABLE i386)
X-Accept-Language: en, ja
MIME-Version: 1.0
To: "Sergy A. Osokin" <osa@freebsd.org.ru>
Cc: freebsd-stable@freebsd.org
Subject: Re: ata0 --- again
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-stable@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-stable.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-stable>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-stable>
X-Loop: FreeBSD.ORG

Ok.. here's the output from dmesg -v of day before yesterday (has stayed
up so far) and uname -a


Sam

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #0: Mon Dec 17 12:43:04 EST 2001
    sam@vortex.wa4phy.net:/usr/obj/usr/src/sys/VORTEX
Calibrating clock(s) ... TSC clock: 880315765 Hz, i8254 clock: 1193350
Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 880198407 Hz
CPU: AMD Athlon(tm) Processor (880.20-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
 
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way
associative
real memory  = 402587648 (393152K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00357000 - 0x17fe7fff, 399052800 bytes (97425 pages)
avail memory = 388526080 (379420K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb40
bios32: Entry = 0xfdb50 (c00fdb50)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xdb71
pnpbios: Found PnP BIOS data at 0xc00f7180
pnpbios: Entry = f0000:60e4  Rev = 1.0
Other BIOS signatures found:
ACPI: 000fa8c0
Preloaded elf kernel "kernel" at 0xc0330000.
Pentium Pro MTRR support enabled
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=03911106)
Using $PIR table, 8 entries at 0xc00f7800
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x1106, dev=0x0391, revid=0x02
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base e0000000, size 26
found->	vendor=0x1106, dev=0x8391, revid=0x00
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x1106, dev=0x0686, revid=0x22
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x0571, revid=0x10
	class=01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000ffa0, size  4
found->	vendor=0x1106, dev=0x3038, revid=0x10
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=5
	map[20]: type 1, range 32, base 0000cc00, size  5
found->	vendor=0x1106, dev=0x3038, revid=0x10
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=5
	map[20]: type 1, range 32, base 0000d000, size  5
found->	vendor=0x1106, dev=0x3057, revid=0x30
	class=0c-05-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1002, dev=0x4750, revid=0x5c
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base de000000, size 24
	map[14]: type 1, range 32, base 0000d800, size  8
	map[18]: type 1, range 32, base dffff000, size 12
found->	vendor=0x9004, dev=0x7178, revid=0x00
	class=01-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base 0000d400, size  8
	map[14]: type 1, range 32, base dfffe000, size 12
found->	vendor=0x1274, dev=0x1371, revid=0x07
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base 0000c800, size  6
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=5
	map[10]: type 1, range 32, base 0000c400, size  8
	map[14]: type 1, range 32, base dfffdf00, size  8
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8391)> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=7f b=7f
ata1: mask=03 status0=00 status1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 7.2 irq
5
pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 7.3 irq
5
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
pci0: <ATI Mach64-GP graphics accelerator> (vendor=0x1002, dev=0x4750)
at 9.0 irq 11
ahc0: <Adaptec 2940 SCSI adapter> port 0xd400-0xd4ff mem
0xdfffe000-0xdfffefff irq 10 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 429 instructions downloaded
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs
pcm0: <Creative CT5880-A> port 0xc800-0xc83f irq 10 at device 14.0 on
pci0
pcm0: ac97 codec id 0x83847608 (SigmaTel STAC9708/9711)
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume,
SigmaTel 3D Enhancement
pcm0: ac97 primary codec extended features surround DAC
	using shared irq10.
pcm: setmap 17515000, 1000; 0xc10a1000 -> 17515000
pcm: setmap 17517000, 1000; 0xc10a3000 -> 17517000
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem
0xdfffdf00-0xdfffdfff irq 5 at device 15.0 on pci0
rl0: Ethernet address: 00:50:bf:75:18:fb
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
DLK2201: adding io range 0x240-0x39f, size=0x20, align=0x20
DLK2201: adding irq mask 0x9e28
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 05 a0 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x2001 0x2009 0x2001 0x2001
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x240 specified. Nearest valid baseport is
0x250.  Failing probe.
ed1: <D-Link DE-220P PnP ISA Card> at port 0x240-0x25f irq 9 on isa0
bpf: ed1 attached
ed1: address 00:80:c8:da:b1:6d, type NE2000 (16 bit) 
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to deny, logging limited to 100 packets/entry by
default
ata0-master: success setting UDMA4 on VIA chip
Creating DISK ad0
ad0: <IBM-DJNA-372200/J71CA30K> ATA-4 disk at ata0-master
ad0: 21557MB (44150400 sectors), 43800 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 21557MB <IBM-DJNA-372200> [43800/16/63] at ata0-master UDMA66
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <CREATIVE CD5230E/C1.01> CDROM drive at ata1 as master
acd0: 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe6:ahc0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0 
(probe6:ahc0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe6:ahc0:0:6:0): Invalid field in CDB
(ahc0:A:6:0): Sending SDTR period 1f, offset f
(ahc0:A:6:0): Received SDTR period 32, offset f
	Filtered to period 32, offset f
ahc0: target 6 synchronous at 5.0MHz, offset = 0xf
(ahc0:A:6:0): Sending SDTR period 32, offset f
(ahc0:A:6:0): Received SDTR period 32, offset f
	Filtered to period 32, offset f
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE 4326XX 27871-XXX 4.AO> Removable Sequential Access SCSI-2
device 
sa0: 5.000MB/s transfers (5.000MHz, offset 15)
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 44146619, size 44146557 : OK
start_init: trying /sbin/init
Linux ELF exec handler installed
cd9660: RockRidge Extension
ad0: WRITE command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. ata0: mask=01 ostat0=d0 ostat2=00
ata0-slave: ATAPI probe a=00 b=00
ata0-master: ATAPI probe a=00 b=00
ata0: mask=01 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0-master: success setting UDMA4 on VIA chip
done

FreeBSD vortex.wa4phy.net 4.4-STABLE FreeBSD 4.4-STABLE #0: Mon Dec 17
12:43:04 EST 2001     sam@vortex.wa4phy.net:/usr/obj/usr/src/sys/VORTEX 
i386

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message