Date: Mon, 18 Feb 2002 11:52:54 +0100 From: John Morgan Salomon <john@zog.net> To: freebsd-questions@freebsd.org Subject: Thinkpad Hangs with USB Message-ID: <3C70DD06.1040704@zog.net>
next in thread | raw e-mail | index | archive | help
Hi there,
I have an IBM Thinkpad X20, running 4.4-R. Generally, it works fine,
but when I attempt to access a USB device, the box just freezes
irretrievably.
Attaching the device works, but actually running something to access it,
such as s10sh, stops the box dead.
I have tried with both a Canon IXUS 300 and a Logitech Quickcam.
I would appreciate any help--I can't find any references to Thinkpads
hanging
with USB. I have seen similar behavior with a 600E a while ago when
attaching
a serial device--the laptop just froze--no error messages, nothing.
Attached are my kernel config, dmesg, and an output of usbd -dv. Thanks
in advance
for any help, this is frustrating!
Cheers,
-John
bolo# usbd -dv
usbd: opened /dev/usb0
usbd: reading configuration file /etc/usbd.conf
usbd: opened /dev/usb
usbd: detach event at 1014029213.739788000, product 0x2036, Texas
Instruments:
vndr=0x0451 prdct=0x2036 rlse=0x0101 clss=0x0009 subclss=0x0000
prtcl=0x0000
device names: uhub1
usbd: Found action 'USB device' for product 0x2036, Texas Instruments at
uhub1
usbd: attach event at 1014029221.850270000, General Purpose USB Hub,
Texas Instruments:
vndr=0x0451 prdct=0x2036 rlse=0x0101 clss=0x0009 subclss=0x0000
prtcl=0x0000
device names: uhub1
usbd: Found action 'USB device' for General Purpose USB Hub, Texas
Instruments at uhub1
usbd: attach event at 1014029222.230177000, Camera, Logitech, Inc.:
vndr=0x046d prdct=0x0850 rlse=0x0100 clss=0x00ff subclss=0x00ff
prtcl=0x00ff
device names: ugen0
usbd: Found action 'USB device' for Camera, Logitech, Inc. at ugen0
bolo# cat /usr/src/sys/i386/conf/thinkpad
machine i386
cpu I686_CPU
ident GENERIC
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options IPFILTER # enable IPF
options IPFILTER_LOG # enable packet logging
options COMPAT_LINUX
options DEBUG_LINUX
options IPSEC # allow ipsec in kernel
options IPSEC_ESP # allow ipsec tunneling
options PSM_HOOKRESUME # Both required to avoid mouse
out of
options PSM_RESETAFTERSUSPEND # sync messages after apm sleep
# Hopefully this will allow me to use the modem
options PNPBIOS
# Required for Mom's idiotic DSL provider
options NETGRAPH
options NETGRAPH_PPPOE
# required by avifile & WINE
options USER_LDT
device isa
device eisa
device pci
device miibus
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt
console
#options FAT_CURSOR # start with block cursor
#options PCVT_FREEBSD
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
# USB ethernet adapter
device aue
# Sound driver - We think ThinkPad have a Crystal card in them
#device pcm0 at isa? irq 10 drq 1 flags 0x0
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
# USB ethernet adapter
device aue
# Sound driver - We think ThinkPad have a Crystal card in them
#device pcm0 at isa? irq 10 drq 1 flags 0x0
device pcm
# Crystal Semiconductor cards
device csa0
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 4 # Kernel PPP (give it a few more -John)
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device ums # Mouse
device uscanner # Scanners
bolo# dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE-p3 #8: Mon Feb 18 11:16:53 CET 2002
root@bolo.zog.net:/usr/src/sys/compile/thinkpad
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (597.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory = 201261056 (196544K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 191729664 (187236K bytes)
Preloaded elf kernel "kernel" at 0xc0406000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdee0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1800-0x180f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq
11 at de
vice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments General Purpose USB Hub, class 9/0, rev
1.10/1.01, addr
2
uhub1: 2 ports with 2 removable, self powered
ugen0: Logitech, Inc. Camera, rev 1.00/1.00, addr 3
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at
device
7.3 on pci0
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq
11 at de
vice 8.0 on pci0
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq
11 at de
vice 8.1 on pci0
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1840-0x187f mem
0xf4020000-0xf403
ffff,0xf4010000-0xf4010fff irq 11 at device 10.0 on pci0
fxp0: Ethernet address 00:10:a4:a6:63:4c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x115d, dev=0x000c) at 10.1 irq 11
pcm0: <Crystal Semiconductor CS4281> mem
0xf4000000-0xf400ffff,0xf4012000-0xf401
2fff irq 11 at device 11.0 on pci0
orm0: <Option ROMs> at iomem
0xc0000-0xccfff,0xcd000-0xce7ff,0xd8000-0xdbfff,0xd
c000-0xdcfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
unknown: <PNP0c01> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <IBM3780> can't assign resources
unknown: <PNP0680> can't assign resources
ppc1: <Standard parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0700> can't assign resources
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
ad0: 19077MB <IBM-DJSA-220> [41344/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
WARNING: R/W mount of /usr denied. Filesystem is not clean - run fsck
WARNING: R/W mount of /var denied. Filesystem is not clean - run fsck
WARNING: R/W mount of /var denied. Filesystem is not clean - run fsck
IP Filter: already initialized
module_register: module linuxelf already exists!
linker_file_sysinit "linux.ko" failed to register! 17
module_register: module linuxaout already exists!
linker_file_sysinit "linux.ko" failed to register! 17
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name:
build-570
$
/dev/vmmon: Module vmmon: initialized
module_register: module netgraph already exists!
linker_file_sysinit "netgraph.ko" failed to register! 17
vmnet1: promiscuous mode enabled
ugen0: at uhub1 port 2 (addr 3) disconnected
ugen0: detached
uhub1: at uhub0 port 1 (addr 2) disconnected
uhub1: detached
uhub1: Texas Instruments General Purpose USB Hub, class 9/0, rev
1.10/1.01, addr
2
uhub1: 2 ports with 2 removable, self powered
ugen0: Logitech, Inc. Camera, rev 1.00/1.00, addr 3
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C70DD06.1040704>