Date: Mon, 23 Dec 2002 19:03:23 +0200 From: "Vyacheslav S. Prilipko" <slavex@smau.com.ua> To: freebsd-isdn@freebsd.org Subject: Fritz Card 2 Problems Message-ID: <au7fkj$1sba$1@pandora.alkar.net>
next in thread | raw e-mail | index | archive | help
From: "Vyacheslav S. Prilipko" <slavex@smau.com.ua> Subject: Fritz 2 PCI Troubles ! Date: 23 грудня 2002 р. 18:57 I`ve 4.7 istalled with Fritz 2 PCI internal Card. When I try to bring up isp0 I get this: Dec 23 15:29:42 server isdnd[310]: DMN i4b isdn daemon started (pid = 310) Dec 23 15:29:43 server /kernel: i4b-L1 ifpi2_ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Dec 23 15:29:45 server /kernel: i4b-L1 timer3_expired: state = F4 Awaiting Signal Dec 23 15:29:45 server /kernel: ifpi2_recover 0 Dec 23 15:29:45 server /kernel: i4b-L2 i4b_T202_timeout: unit 0, N202 = 3 Dec 23 15:29:45 server /kernel: i4b-L1 ifpi2_ph_data_req: still in state F3! Dec 23 15:29:45 server /kernel: i4b-L1 ifpi2_ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Dec 23 15:29:47 server /kernel: i4b-L3 T303_timeout: SETUP not answered, cr = 122 Dec 23 15:29:47 server /kernel: i4b-L3 next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout! Dec 23 15:29:47 server /kernel: i4b-L1 timer3_expired: state = F4 Awaiting Signal Dec 23 15:29:47 server /kernel: ifpi2_recover 0 or Dec 23 15:24:18 server /kernel: i4b-L2 F_ILL: FSM function F_ILL executing Dec 23 15:24:18 server /kernel: i4b-L2 i4b_next_l2state: FSM illegal state, state = ST_EST_AW_TEI, event = EV_DLESTRQ! Dec 23 15:24:18 server isdnd[55]: ERR decr_free_channels: controller [0] already 0 free chans! Dec 23 15:24:20 server /kernel: i4b-L1 timer3_expired: state = F4 Awaiting Signal Dec 23 15:24:20 server /kernel: ifpi2_recover 0 Dec 23 15:24:22 server /kernel: i4b-L3 T303_timeout: SETUP not answered, cr = 63 Dec 23 15:24:22 server /kernel: i4b-L3 next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout! after that isdnd do nothing on any other try for bring isp0 and have to be restarted / re-read its config Whats wrong with it if I simply up this line on Windows after some switching NTBA power on/off for several times, but it doesn`t work on FreeBSD (doesn`t establish isp0 link) !? What I have to check out? May it be solved with applying some patches? I need only one B channel to work! some lines from config: isdnd.rc____________________________________________________________________ _ name = ALKAR usrdevicename = isp usrdeviceunit = 0 isdncontroller = 0 isdnchannel = -1 local-phone-dialout = 22 remote-phone-dialout = 7111111 remdial-handling = first dialin-reaction = ignore dialout-type = normal dialretries = 10 b1protocol = hdlc idletime-incoming = 1 idletime-outgoing = 5 ratetype = 0 unitlength = 90 unitlengthsrc = rate dialrandincr = off direction = out rc.conf ... ifconfig_isp0="inet 0.0.0.0 0.0.0.1 netmask 255.255.255.255 link1" sppp_interfaces="isp0" # example: sppp over ISDN spppconfig_isp0="authproto=pap myauthname=optima myauthsecret='optima' hisauthproto=none" defaultrouter="0.0.0.1" isdn_enable="YES" # Enable the ISDN subsystem (or NO). isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode isdn_flags="NO" # Flags for isdnd isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace Thanks in advance! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?au7fkj$1sba$1>