From owner-freebsd-questions  Thu Aug 17 11:24:03 1995
Return-Path: questions-owner
Received: (from majordom@localhost)
          by freefall.FreeBSD.org (8.6.11/8.6.6) id LAA00370
          for questions-outgoing; Thu, 17 Aug 1995 11:24:03 -0700
Received: from domus.domus.com (domus.domus.com [205.211.4.241])
          by freefall.FreeBSD.org (8.6.11/8.6.6) with ESMTP id LAA00349
          for <questions@freebsd.org>; Thu, 17 Aug 1995 11:23:53 -0700
Received: (from hellis@localhost) by domus.domus.com (8.6.9/8.6.9) id OAA17504; Thu, 17 Aug 1995 14:22:16 -0500
Date: Thu, 17 Aug 1995 14:22:16 -0500
From: "Hugh S. Ellis" <hellis@domus.com>
Message-Id: <199508171922.OAA17504@domus.domus.com>
To: questions@freebsd.org
Subject: PPP and serial line configuration FAQs for 1.1.5.1
Cc: hellis@domus.com
Sender: questions-owner@freebsd.org
Precedence: bulk

Hello,

I am trying to get PPP running on my 1.1.5.1 machine.  Before I did anything
so complex, I thought it would be good to use tip to check to see if I could
really talk to the modem.  Unfortunately, my devices do not seem to be 
configured properly, and I don't know how.  I ran MAKEDEV on cua00 and cua01
and com1 and com2 and tty00 and tty01 with no luck.

Is there a FAQ on setting up serial devices?  Is there one on setting up PPP
in version 1.something?

The error message that I am getting says /dev/cua02: device not configured
So how do I configure them?

dmesg | grep sio   reveals that the system sees the two serial ports
sio0 and sio1 on IRQ 4 and 3, as normal.

Any pointers would be appreciated.   

Hugh Ellis
Ottawa, Ontario, Canada.