Date: Tue, 23 Nov 2004 04:09:14 GMT From: Lefteris Tsintjelis <lefty@ene.asda.gr> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/74281: Digiboard PCI Xem (64-ports) detection/init problem Message-ID: <200411230409.iAN49EAB022789@www.freebsd.org> Resent-Message-ID: <200411230410.iAN4ASCZ003234@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 74281
>Category: kern
>Synopsis: Digiboard PCI Xem (64-ports) detection/init problem
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Nov 23 04:10:28 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Lefteris Tsintjelis
>Release: 5.3-STABLE
>Organization:
ASDA
>Environment:
FreeBSD hermes2.asda.gr 5.3-STABLE FreeBSD 5.3-STABLE #0: Tue Nov 23 05:24:24 EET 2004 root@hermes2.asda.gr:/usr/obj/usr/src/sys/CUSTOM i386
>Description:
I am using a 64 port Digiboard Xem PCI card and only 32 ports are detected. There are also a few Invalid i/o address errors during boot time.
dmesg follows:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Tue Nov 23 05:24:24 EET 2004
root@hermes2.asda.gr:/usr/obj/usr/src/sys/CUSTOM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536858624 (511 MB)
avail memory = 515702784 (491 MB)
MPTable: <OEM00000 PROD00000000>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, USB> at device 4.2 (no driver attached)
piix0: <PIIX Timecounter> port 0xe800-0xe80f at device 4.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xe3000000-0xe3000fff irq 19 at device 6.0 on pci0
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xe2000000-0xe20fffff,0xe2800000-0xe2800fff irq 18 at device 10.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:b7:07:6a:1d
digi0 mem 0xe1800000-0xe1bfffff irq 17 at device 11.0 on pci0
digi0: Digiboard PCI PC/Xem ASIC, 32 ports found
pci0: <display, VGA> at device 12.0 (no driver attached)
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
digi1: 0x040: Invalid i/o address
digi1: 0x070: Invalid i/o address
unknown: <PNP0303> can't assign resources (port)
digi1: 0x0f0: Invalid i/o address
digi1: 0x061: Invalid i/o address
digi1: 0xcf8: Invalid i/o address
digi1: 0x290: Invalid i/o address
Timecounters tick every 2.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
acd0: CDROM <Pioneer CD-ROM ATAPI Model DR-A14S 0104/E1.04> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 3 lun 0
sa0: <HP C1537A L005> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 32)
SMP: AP CPU #1 Launched!
da0 at ahc0 bus 0 target 0 lun 0
da0: <WDIGTL WDE9100 ULTRA2 1.22> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
da0: 8759MB (17938470 512 byte sectors: 64H 32S/T 8759C)
Mounting root from ufs:/dev/da0s1a
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200411230409.iAN49EAB022789>