Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 13 May 2003 00:10:06 -0700 (PDT)
From:      Lars =?iso-8859-1?Q?K=F6ller?= <Lars.Koeller@uni-bielefeld.de>
To:        freebsd-bugs@FreeBSD.org
Subject:   Re: bin/51586: rsh/rshd connect problem (select: protocol failurein circuit setup)
Message-ID:  <200305130710.h4D7A6nH031263@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR bin/51586; it has been noted by GNATS.

From: Lars =?iso-8859-1?Q?K=F6ller?= <Lars.Koeller@uni-bielefeld.de>
To: freebsd-gnats-submit@FreeBSD.org
Cc: Lars.Koeller@uni-bielefeld.de, ianf@za.uu.net, silby@silby.com,
	Jeffrey Hsu <hsu@FreeBSD.org>,
	mark tinguely <tinguely@web.cs.ndsu.nodak.edu>
Subject: Re: bin/51586: rsh/rshd connect problem (select: protocol failure in
 circuit setup)
Date: Tue, 13 May 2003 09:07:02 +0200

 --------
 
 Hello,
 
 as extensive test have shown, the problem didn't occur with the second =
 
 intel LAN interface on the board. The fxp driver works well without any =
 
 problems.
 
 You can easily verift that there is a problem when telnet-ing to the =
 
 questionable machine:
 
 
 75361 : telnet vscan1 622
 Trying 129.70.4.44...
 telnet: connect to address 129.70.4.44: Connection refused
 telnet: Unable to connect to remote host
 
 
 75362 : telnet vscan1 623
 Trying 129.70.4.44...
 
 -- Hanging --
 
 
 75363 : telnet vscan1 624
 Trying 129.70.4.44...
 telnet: connect to address 129.70.4.44: Connection refused
 
 
 It is clear, thar on these ports NO SERVICE IS enabled!
 
 
 So it seems the problem is located in the em driver or firmware or board =
 
 which is a =
 
 
 MSI: MS-9129
 
 An update to the newest driver provided by intel didn't change anything:
 
 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xc000=
 -0xc03f mem 0xe2000000-0xe201ffff irq 10 at device 5.0 on pci2
 em0:  Speed:100 Mbps  Duplex:Full
 
 irq 10 is used exclusivly.
 
 Even the em driver was used in 100MBit full duplex on the same =
 
 switchport as the fxp0 LAN port.
 
 If I can find some time I will try to upgrade the firmware/BIOS.
 
 Best regards
 
 Lars
 
 -- =
 
 E-Mail: Lars.Koeller@Uni-Bielefeld.DE        \  Lars K=F6ller
             lkoeller@FreeBSD.org              \  CC University of
 PGP: http://www.uk.pgp.net/pgpnet/wwwkeys.html \  Bielefeld, Germany =
 
      Key-ID: A430D499                           \  Tel: +49 521 106 4964
 ----------- FreeBSD, what else? ---- http://www.freebsd.org -------------=
 
 
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305130710.h4D7A6nH031263>