Date: Thu, 25 Aug 2005 07:21:32 +0200 From: Kirill Ponomarew <krion@voodoo.oberon.net> To: "M. Warner Losh" <imp@bsdimp.com> Cc: d.wylie@wylie.nl, freebsd-mobile@freebsd.org Subject: Re: HP nx9005 and Netgear WG511T Message-ID: <20050825052132.GB38290@voodoo.oberon.net> In-Reply-To: <20050824.203322.41266777.imp@bsdimp.com> References: <20050820151827.GE34551@voodoo.oberon.net> <20050820181031.5gg7nbr9y1c804s8@webmail.wylie.nl> <20050820162324.GF34551@voodoo.oberon.net> <20050824.203322.41266777.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--45Z9DzgjV8m4Oswq Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Wed, Aug 24, 2005 at 08:33:22PM -0600, M. Warner Losh wrote: > : Yes, the card works perfect on all another machines. > : > : > The messages on uplugging would't realy worry me actually; it does > : > detach eventualy. Could be wrong though. Perhaps some-one else > : > can enlighten us on the ghz stuff: does it have any 'real' value, > : > or is it just some hardware string? > > Please send me the full dmesg output. It may be a cbb problem. Attached. -Kirill --45Z9DzgjV8m4Oswq Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 ff 03 00 01 0a 01 00 01 20 01 00 01 25 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 60 mode(s) found VESA: v2.0, 65472k memory, flags:0x1, mode table:0xc0742702 (1000022) VESA: ATI CABO VESA: ATI Technologies Inc. U1 01.00 null: <null device, zero device> nfslock: pseudo-device random: <entropy source, Software, Yarrow> ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) ACPI-0377: *** Info: Table [SSDT] replaced by host OS ACPI: overriding DSDT/SSDT with custom table ACPI-0377: *** Info: Table [DSDT] replaced by host OS npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cab01002) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00fdf10 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 13 1 5 A 0x01 3 4 6 9 10 embedded 0 2 A 0x09 3 4 6 9 10 embedded 0 15 A 0x05 3 4 6 9 10 embedded 0 8 A 0x07 3 4 6 9 10 embedded 0 6 A 0x08 5 7 embedded 0 9 A 0x04 3 4 6 9 10 embedded 0 9 B 0x03 3 4 6 9 10 embedded 0 10 A 0x06 7 11 embedded 0 10 B 0x06 7 11 embedded 0 18 A 0x02 7 11 embedded 0 12 A 0x03 3 4 6 9 10 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 0 func 0 pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 6 10 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 6 10 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 7 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 7 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 7 11 pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 6 10 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 6 10 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link3: <ACPI PCI Link LNKD> on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 7 11 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 7 11 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 7 11 pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 6 10 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 6 10 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 5 7 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 5 7 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link8: <ACPI PCI Link LNKU> irq 9 on acpi0 pci_link8: Links after initial probe: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 6 10 pci_link8: Links after initial validation: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 6 10 pci_link8: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 10 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 acpi_ec0: info: new max delay is 20 us AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi_ec0: info: new max delay is 70 us acpi_ec0: info: new max delay is 100 us ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/1 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K7> on cpu0 powernow0: STATUS: 0xb0b0b00150615 powernow0: STATUS: maxfid: 0x15 powernow0: STATUS: startvid: 0x0b powernow: 0 1782000kHz FID 15 VID 0b powernow: 1 1452000kHz FID 00 VID 0d powernow: 2 1056000kHz FID 0a VID 13 powernow: 3 792000kHz FID 06 VID 13 powernow: 4 660000kHz FID 04 VID 13 powernow: 5 528000kHz FID 12 VID 13 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1002, dev=0xcab0, revid=0x13 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base d4000000, size 26, enabled map[14]: type 3, range 32, base d0500000, size 12, enabled map[18]: type 4, range 32, base 00008090, size 2, port disabled found-> vendor=0x1002, dev=0x700f, revid=0x01 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0004000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.ISA_.LNKU:0) pcib0: slot 2 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKU found-> vendor=0x10b9, dev=0x5451, revid=0x02 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0xc290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00008400, size 8, enabled map[14]: type 1, range 32, base d0005000, size 12, enabled pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.ISA_.LNKH:0) pcib0: slot 6 INTA routed to irq 5 via \\_SB_.PCI0.ISA_.LNKH found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x5457, revid=0x00 bus=0, slot=8, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0006000, size 12, enabled map[14]: type 4, range 32, base 00008800, size 8, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.ISA_.LNKG:0) pcib0: slot 8 INTA routed to irq 3 via \\_SB_.PCI0.ISA_.LNKG found-> vendor=0x1217, dev=0x6933, revid=0x01 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 80000000, size 12, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0) pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF found-> vendor=0x1217, dev=0x6933, revid=0x01 bus=0, slot=10, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0008000, size 12, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0) pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=0, slot=12, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0009000, size 11, enabled map[14]: type 1, range 32, base d0000000, size 14, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.ISA_.LNKC:0) pcib0: slot 12 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKC found-> vendor=0x10b9, dev=0x5229, revid=0xc4 bus=0, slot=16, func=0 class=01-01-b0, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00008080, size 4, enabled found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x100b, dev=0x0020, revid=0x00 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x5a (2700 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00008c00, size 8, enabled map[14]: type 1, range 32, base d000a000, size 12, enabled pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ISA_.LNKB:0) pcib0: slot 18 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKB pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xd0100000-0xd01fffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4336, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 28, enabled pcib1: (null) requested memory range 0xe0000000-0xefffffff: good map[14]: type 4, range 32, base 00009000, size 8, enabled pcib1: (null) requested I/O range 0x9000-0x90ff: in range map[18]: type 1, range 32, base d0100000, size 16, enabled pcib1: (null) requested memory range 0xd0100000-0xd010ffff: good pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.ISA_.LNKC:0) pcib1: slot 5 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKC pci1: <display, VGA> at device 5.0 (no driver attached) pci0: <serial bus, USB> at device 2.0 (no driver attached) pci0:2:0: Transition from D0 to D3 pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xd0005000-0xd0005fff irq 5 at device 6.0 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8400 pcm0: <Conexant CX20468 AC97 Codec (id = 0x43585429)> pcm0: Codec features reserved, headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP pcm0: ac97 codec dac ready count: 0 pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 178000, 1000; 0xc1484000 -> 178000 pcm0: sndbuf_setmap 176000, 1000; 0xc1482000 -> 176000 pcm0: sndbuf_setmap 201000, 1000; 0xc14cd000 -> 201000 pcm0: sndbuf_setmap 1ff000, 1000; 0xc14cb000 -> 1ff000 pcm0: sndbuf_setmap 1dd000, 1000; 0xc14c9000 -> 1dd000 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <simple comms, generic modem> at device 8.0 (no driver attached) pci0:8:0: Transition from D0 to D3 cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 11 at device 10.0 on pci0 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x69331217 0x04100007 0x06070001 0x00822000 0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 0x40: 0x00026933 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x08008200 0x82420bea 0x20500000 0x00000000 0xa0: 0xfe020001 0x10c04100 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0xd0008000-0xd0008fff irq 11 at device 10.1 on pci0 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0008000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x69331217 0x04100007 0x06070001 0x00824000 0x10: 0xd0008000 0x220000a0 0x20030300 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0440010b 0x40: 0x00026933 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x08008200 0x82420bea 0x20500000 0x00000000 0xa0: 0xfe020001 0x10c04000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci0: <serial bus, FireWire> at device 12.0 (no driver attached) pci0:12:0: Transition from D0 to D3 atapci0: <AcerLabs M5229 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8080-0x808f at device 16.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8080 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] pci0: <bridge> at device 17.0 (no driver attached) sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xd000a000-0xd000afff irq 11 at device 18.0 on pci0 sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8c00 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x080017, model 0x0002, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached sis0: Ethernet address: 00:0d:9d:5b:0c:cf sis0: [MPSAFE] acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 0 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdb000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1788938139 Hz quality 800 Timecounters tick every 1.000 msec pflog0: bpf attached lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on AcerLabs M5229 chip ad0: setting UDMA100 on AcerLabs M5229 chip ad0: 38154MB <IC25N040ATCS04 0 CA4OA71A> at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue Interrupt storm detected on "irq11: cbb0 cbb1+"; throttling interrupt source found-> vendor=0x168c, dev=0x0013, revid=0x01 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 on cardbus1 ath0: [MPSAFE] ath0: bpf attached ath0: Ethernet address: 00:0f:b5:26:a8:92 ath0: bpf attached ath0: bpf attached ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.9 phy 4.3 radio 4.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons acpi_ec0: info: new max delay is 180 us acpi_ec0: info: new max delay is 190 us ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=BIOSDMA cable=40 wire acd0: setting PIO4 on AcerLabs M5229 chip acd0: <DW-224E/A.0H> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1658KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, testacpi_ec0: info: new max delay is 11000 us write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded GEOM: new disk ad0 Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init pci0: driver added found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D3 pci0:2:0: reprobing on driver added pci0:2:0: Transition from D3 to D0 pci0:2:0: Transition from D0 to D3 found-> vendor=0x10b9, dev=0x5457, revid=0x00 bus=0, slot=8, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D3 pci0:8:0: reprobing on driver added pci0:8:0: Transition from D3 to D0 pci0:8:0: Transition from D0 to D3 found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=0, slot=12, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D3 pci0:12:0: reprobing on driver added pci0:12:0: Transition from D3 to D0 pci0:12:0: Transition from D0 to D3 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:17:0: reprobing on driver added pci1: driver added found-> vendor=0x1002, dev=0x4336, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pci1:5:0: reprobing on driver added pci0: driver added found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D3 pci0:2:0: reprobing on driver added pci0:2:0: Transition from D3 to D0 ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0004000-0xd0004fff irq 9 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0004000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered found-> vendor=0x10b9, dev=0x5457, revid=0x00 bus=0, slot=8, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D3 pci0:8:0: reprobing on driver added pci0:8:0: Transition from D3 to D0 pci0:8:0: Transition from D0 to D3 found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=0, slot=12, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D3 pci0:12:0: reprobing on driver added pci0:12:0: Transition from D3 to D0 pci0:12:0: Transition from D0 to D3 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:17:0: reprobing on driver added pci1: driver added found-> vendor=0x1002, dev=0x4336, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pci1:5:0: reprobing on driver added pci0: driver added found-> vendor=0x10b9, dev=0x5457, revid=0x00 bus=0, slot=8, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D3 pci0:8:0: reprobing on driver added pci0:8:0: Transition from D3 to D0 pci0:8:0: Transition from D0 to D3 found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=0, slot=12, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D3 pci0:12:0: reprobing on driver added pci0:12:0: Transition from D3 to D0 pci0:12:0: Transition from D0 to D3 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:17:0: reprobing on driver added pci1: driver added found-> vendor=0x1002, dev=0x4336, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pci1:5:0: reprobing on driver added Linux ELF exec handler installed battery0: battery initialization done, tried 2 times pci0: driver added found-> vendor=0x10b9, dev=0x5457, revid=0x00 bus=0, slot=8, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D3 pci0:8:0: reprobing on driver added pci0:8:0: Transition from D3 to D0 pci0:8:0: Transition from D0 to D3 found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=0, slot=12, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D3 pci0:12:0: reprobing on driver added pci0:12:0: Transition from D3 to D0 pci0:12:0: Transition from D0 to D3 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:17:0: reprobing on driver added pci1: driver added found-> vendor=0x1002, dev=0x4336, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pci1:5:0: reprobing on driver added drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem 0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 9 at device 5.0 on pci1 info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 error: [drm:pid561:radeon_cp_init] *ERROR* radeon_cp_init called without lock held error: [drm:pid561:drm_unlock] *ERROR* Process 561 using kernel context 0 --45Z9DzgjV8m4Oswq--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050825052132.GB38290>