Date: Wed, 31 Mar 2004 00:02:15 +1000 From: Tim Robbins <tjr@freebsd.org> To: "R. David Murray" <rdmurray@bitdance.com> Cc: freebsd-current@freebsd.org Subject: Re: 5.2.1 hangs on boot where 5.1 does not (ATA issue) Message-ID: <20040330140215.GA50962@cat.robbins.dropbear.id.au> In-Reply-To: <20040329180323.M43054@twirl.bitdance.com> References: <20040329180323.M43054@twirl.bitdance.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 29, 2004 at 06:24:25PM -0500, R. David Murray wrote: > ad2: 38166MB <ST34081A> [77545/16/63] at ata0-master UDMA100 > acd0:DVDROM <DVDROM 12x> at ata1-slave PIO4 > ad2: TIMEOUT - READ_DMA retrying (2 retries left) LBA=0 > ata1: reiniting channel .. > ata1: reset tp1 mask=03 ostat0=58 ostat1=50 > ad2: stat=0x50 err=0x01 lsb=0x00 msb=0x00 > acd0: stat=0x00 err=0x00 lsb=0x14 msb=0xeb > ata1: reset tp2 mask=03 stat0=50 stat1=00 devices=0x9 <ATAPI_SLAVE,ATA_MASTER> > ata1: resetting done > acd0: pio=0x0c wdma=0x22 udma=0x42 cable=40pin > ad2: pio=0x0c wdma=0x22 udma=0x45 cable=40pin > ad2: setting PIO4 on Intel ICH2 chip > ad2: setting UDMA100 on Intel ICH2 chip > acd0: setting IPO4 on Intel ICH2 chip > ad2: setting UDMA100 on Intel ICH2 chip > acd0: setting IPO4 on Intel ICH2 chip > ata1: device config done > ad2: WARNING - READ_DMA interrupt was seen but timeout fired LBA=0 > ad2: WARNING - READ_DMA interrupt was seen but taskqueue stalled LBA=0 Check your cables and jumpers. I've only ever seen this error when they were incorrect. Tim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040330140215.GA50962>