Date: Thu, 5 Apr 2007 10:21:41 -0700 From: Marcel Moolenaar <xcllnt@mac.com> To: Rick Jones <rick.jones2@hp.com> Cc: freebsd-ia64@freebsd.org Subject: Re: Install problem HP integrity rx2660(Montecito) Message-ID: <92E5D9E5-4F6A-426D-93F7-2B14AF39CD38@mac.com> In-Reply-To: <46152B18.2000504@hp.com> References: <461357FF.1060505@hob.de> <FFBC286D-78B2-4368-903B-2D8DA755FA4E@mac.com> <461492A3.9@hob.de> <46152B18.2000504@hp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Apr 5, 2007, at 10:00 AM, Rick Jones wrote: > Richard Walter wrote: >> Hello, >> I have attached my console at the serial port at the backside of >> the machine (console IOIOIO). There is an auxiliary serial port >> too and a vga port. >> Where can i look for the vendor or divice ID, i have attached some >> outputs: > > At the risk of putting words into Marcel's mouth I would guess > here. Notice the vendor and device id columns. Of course I'm nto > 100% certain that is showing the uarts :) > >> Seg Bus Dev Fnc Vendor Device Slot >> # # # # ID ID # Path >> --- --- --- --- ------ ------ --- ----------- >> 00 00 01 00 0x103C 0x1303 XX Acpi >> (HWP0002,PNP0A03,0)/Pci(1|0) >> 00 00 01 01 0x103C 0x1302 XX Acpi >> (HWP0002,PNP0A03,0)/Pci(1|1) >> 00 00 01 02 0x103C 0x1048 XX Acpi >> (HWP0002,PNP0A03,0)/Pci(1|2) See the PCI ID repository on SourceForge: HP = 0x103c Diva = 0x1048 Richard's original email had: P Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600 S VGA Acpi(HWP0002,PNP0A03,0)/Pci(3|0) It shows that the serial console is on PCI(1|2), which matches the IDs. Unfortunately, we already have those IDs. What we don't have are the right sub-vendor and sub-device IDs :-( Rick, could you run the lspci on Linux for me, provided you have the same management board? If it's safe to do, then I can also add a catch-all. However, It would only be save to enable the first 2 ports and I don't know if there console is typically on either of those two... Anyway... This is what we current have in FreeBSD: Vendor Device Subven Subdev Description ------ ------ ------ ------ ----------- 0x103c, 0x1048, 0x103c, 0x1049, "HP Diva Serial [GSP] Multiport UART - Tosca Console" 0x103c, 0x1048, 0x103c, 0x104a, "HP Diva Serial [GSP] Multiport UART - Tosca Secondary" 0x103c, 0x1048, 0x103c, 0x104b, "HP Diva Serial [GSP] Multiport UART - Maestro SP2" 0x103c, 0x1048, 0x103c, 0x1223, "HP Diva Serial [GSP] Multiport UART - Superdome Console" 0x103c, 0x1048, 0x103c, 0x1226, "HP Diva Serial [GSP] Multiport UART - Keystone SP2" 0x103c, 0x1048, 0x103c, 0x1282, "HP Diva Serial [GSP] Multiport UART - Everest SP2" Thanks, -- Marcel Moolenaar xcllnt@mac.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?92E5D9E5-4F6A-426D-93F7-2B14AF39CD38>