Date: Wed, 28 Sep 2005 12:57:42 +0200 From: Bernd Walter <ticso@cicely12.cicely.de> To: Yar Tikhiy <yar@comp.chem.msu.su> Cc: Bernd Walter <ticso@cicely12.cicely.de>, freebsd-current@freebsd.org, freebsd-net@freebsd.org Subject: Re: "ifconfig -vlandev" syntax Message-ID: <20050928105742.GJ54923@cicely12.cicely.de> In-Reply-To: <20050928103241.GC86457@comp.chem.msu.su> References: <20050922104104.GA13539@comp.chem.msu.su> <20050925213741.GG15981@odin.ac.hmc.edu> <1127686105.23447.35.camel@buffy.york.ac.uk> <20050925225432.GH552@cicely12.cicely.de> <20050928103241.GC86457@comp.chem.msu.su>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Sep 28, 2005 at 02:32:41PM +0400, Yar Tikhiy wrote: > On Mon, Sep 26, 2005 at 12:54:33AM +0200, Bernd Walter wrote: > > On Sun, Sep 25, 2005 at 11:08:25PM +0100, Gavin Atkinson wrote: > > > > > > Also, you can't set both the vlan and IP address information: > > > leeloo# ifconfig vlan14 vlan 14 vlandev fxp0 inet W.X.Y.Z netmask 255.255.255.0 > > > ifconfig: inet: bad value > > > > > > As a result of this, the only way to create vlans from rc.conf seems to > > > be in two stages, by renaming the interface: > > > > > > cloned_interfaces="vlan14" > > > ifconfig_vlan14="vlan 14 vlandev fxp0 name somename" > > > ifconfig_somename="inet W.X.Y.Z netmask 255.255.255.0" > > > > The follwing always worked for me, no need to rename: > > cloned_interfaces="vlan1" > > ifconfig_vlan1="inet 1.2.3.4/29 vlan 1 vlandev fxp0" > > Indeed, the address assignment arguments should precede other > parameters to ifconfig(8). I think this is evident from the syntax > shown on the manpage. > > > What doesn't work is this: > > ifconfig_vlan1_alias0="1.2.3.4/32" > > I had to configure them by a selfdone script. > > Adding aliases on vlanX this way has been working for me. Could > you check if prepending the "inet" keyword before the address changes > anything? I prefer to specify address family explicitly in my > rc.conf files. E.g.: > > ifconfig_vlan1_alias0="inet 1.2.3.4/32" Sorry, but the configuration is used on a production machine that I can't do tests on. -- B.Walter BWCT http://www.bwct.de bernd@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050928105742.GJ54923>