Date: Mon, 20 Mar 2006 17:12:33 -0500 From: "Grant Peel" <gpeel@thenetnow.com> To: <freebsd-questions@freebsd.org> Subject: Ongoing Saga Dell PE1850 - FreeBSD 6.0 Release Freezups. Message-ID: <007601c64c6b$66921860$6501a8c0@GRANT>
next in thread | raw e-mail | index | archive | help
Hi all, I have been having freezups of my PE 1850 and FreeBSD 6.0 RELEASE. since about Feb 23. 1 about every three days. Sometimes twice a day. As far as everything (diagnostics) shows, no hardware issues (See text below ... BMC sensor data, first froup while server is down, second group right after harreset). Extensive memory and mainboard diagnostics have been run. So I am just wondering (before I start the task of movinf this client to a new machine) if anyone has seen complete software freezes, again, with no errors whatsoever in any log, no panics, no coredumps, of FreeBSD 6.0 freezing with the only recovery method being a machine reset, if so what was done to correct it. DoS attack maybe? but on what? ipfw internal issue? Any help would be appreciated. -Grant FYI. SEL shows nothing of note. Just the chassis intrusion that I did reassembling the server on Friday - ensureing everything was seated etc. DUring Freeze: Temp | 50 degrees C | ok (alittle high, but well within tolerance). Temp | 50 degrees C | ok Ambient Temp | 29 degrees C | ok Planar Temp | 37 degrees C | ok Riser Temp | 33 degrees C | ok Temp | 40 degrees C | ok Temp | 40 degrees C | ok CMOS Battery | 3.15 Volts | ok ROMB Battery | Not Readable | ns VCORE | 0x01 | ok VCORE | Not Readable | ns PROC VTT | 0x01 | ok 1.5V PG | 0x01 | ok 1.8V PG | 0x01 | ok 3.3V PG | 0x01 | ok 5V PG | 0x01 | ok 5V Riser PG | 0x01 | ok Riser PG | 0x01 | ok PFault Fail Safe | Not Readable | ns Presence | 0x01 | ok Presence | 0x02 | ok Presence | 0x01 | ok Presence | 0x02 | ok ROMB Presence | 0x02 | ok FAN 1A RPM | 9375 RPM | ok FAN 1B RPM | 6600 RPM | ok FAN 2A RPM | 9525 RPM | ok FAN 2B RPM | 6675 RPM | ok FAN 3A RPM | 9450 RPM | ok FAN 3B RPM | 6675 RPM | ok FAN 4A RPM | 9975 RPM | ok FAN 4B RPM | 6450 RPM | ok Status | 0x80 | ok Status | Not Readable | ns Status | 0x01 | ok Status | Not Readable | ns VRM | 0x01 | ok VRM | 0x01 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x01 | ok SCSI Connector A | Not Readable | ns Drive | 0xc0 | ok ECC Corr Err | 0xc0 | ok ECC Uncorr Err | Not Readable | ns I/O Channel Chk | 0xc0 | ok PCI Parity Err | 0xc0 | ok PCI System Err | 0xc0 | ok SBE Log Disabled | Not Readable | ns Logging Disabled | Not Readable | ns Unknown | Not Readable | ns PROC Protocol | Not Readable | ns PROC Bus PERR | Not Readable | ns PROC Init Err | Not Readable | ns PROC Machine Chk | Not Readable | ns Memory Spared | Not Readable | ns Memory Mirrored | 0x01 | ok Memory RAID | Not Readable | ns Memory Added | 0x01 | ok Memory Removed | 0x01 | ok PCIE Fatal Err | 0x01 | ok Chipset Err | 0x01 | ok Err Reg Pointer | 0x01 | ok After Reset: Temp | 38 degrees C | ok Temp | 50 degrees C | ok Ambient Temp | 29 degrees C | ok Planar Temp | 36 degrees C | ok Riser Temp | 33 degrees C | ok Temp | 40 degrees C | ok Temp | 40 degrees C | ok CMOS Battery | 3.16 Volts | ok ROMB Battery | Not Readable | ns VCORE | 0x01 | ok VCORE | Not Readable | ns PROC VTT | 0x01 | ok 1.5V PG | 0x01 | ok 1.8V PG | 0x01 | ok 3.3V PG | 0x01 | ok 5V PG | 0x01 | ok 5V Riser PG | 0x01 | ok Riser PG | 0x01 | ok PFault Fail Safe | Not Readable | ns Presence | 0x01 | ok Presence | 0x02 | ok Presence | 0x01 | ok Presence | 0x02 | ok ROMB Presence | 0x02 | ok FAN 1A RPM | 9375 RPM | ok FAN 1B RPM | 6675 RPM | ok FAN 2A RPM | 9525 RPM | ok FAN 2B RPM | 6600 RPM | ok FAN 3A RPM | 9450 RPM | ok FAN 3B RPM | 6525 RPM | ok FAN 4A RPM | 9900 RPM | ok FAN 4B RPM | 6450 RPM | ok Status | 0x80 | ok Status | Not Readable | ns Status | 0x01 | ok Status | Not Readable | ns VRM | 0x01 | ok VRM | 0x01 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x01 | ok SCSI Connector A | Not Readable | ns Drive | 0xc0 | ok ECC Corr Err | 0xc0 | ok ECC Uncorr Err | Not Readable | ns I/O Channel Chk | 0xc0 | ok PCI Parity Err | 0xc0 | ok PCI System Err | 0xc0 | ok SBE Log Disabled | Not Readable | ns Logging Disabled | Not Readable | ns Unknown | Not Readable | ns PROC Protocol | Not Readable | ns PROC Bus PERR | Not Readable | ns PROC Init Err | Not Readable | ns PROC Machine Chk | Not Readable | ns Memory Spared | Not Readable | ns Memory Mirrored | 0x01 | ok Memory RAID | Not Readable | ns Memory Added | 0x01 | ok Memory Removed | 0x01 | ok PCIE Fatal Err | 0x01 | ok Chipset Err | 0x01 | ok Err Reg Pointer | 0x01 | ok
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?007601c64c6b$66921860$6501a8c0>