Date: Tue, 10 May 2005 18:46:48 GMT From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-gnats-submit@FreeBSD.org Subject: www/80866: amd64 motherboard - MSI RS480M2-IL Message-ID: <200505101846.j4AIkmgF096635@www.freebsd.org> Resent-Message-ID: <200505101850.j4AIo8Wj094529@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 80866 >Category: www >Synopsis: amd64 motherboard - MSI RS480M2-IL >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue May 10 18:50:07 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Torfinn Ingolfsen >Release: %.4-stable >Organization: >Environment: FreeBSD kg-quiet.kg4.no 5.4-STABLE FreeBSD 5.4-STABLE #2: Tue May 3 22:40:03 CEST 2005 root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET amd64 >Description: Motherboard from MSI, RS480M2-IL (aka MS-7093) Product details: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=639 dmesg output: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #2: Tue May 3 22:40:03 CEST 2005 root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3000+ (1790.84-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 938409984 (894 MB) avail memory = 894029824 (852 MB) acpi0: <RS480 AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) atapci0: <GENERIC ATA controller> port 0xfa00-0xfa0f,0xfb00-0xfb03,0xfc00-0xfc07,0xfd00-0xfd03,0xfe00-0xfe07 irq 11 at device 17.0 on pci0 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 atapci1: <GENERIC ATA controller> port 0xf500-0xf50f,0xf600-0xf603,0xf700-0xf707,0xf800-0xf803,0xf900-0xf907 irq 10 at device 18.0 on pci0 ata4: channel #0 on atapci1 ata5: channel #1 on atapci1 ohci0: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 10 at device 19.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 10 at device 19.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered pci0: <serial bus, USB> at device 19.2 (no driver attached) pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci2: <GENERIC ATA controller> port 0xf300-0xf30f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0 ata0: channel #0 on atapci2 ata1: channel #1 on atapci2 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xdf00-0xdfff mem 0xfdcff000-0xfdcff0ff irq 5 at device 3.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:11:09:f6:dc:02 fwohci0: <VIA Fire II (VT6306)> port 0xde00-0xde7f mem 0xfdcfe000-0xfdcfe7ff irq 11 at device 4.0 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:10:dc:00:00:93:dd:14 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:10:dc:93:dd:14 fwe0: Ethernet address: 02:10:dc:93:dd:14 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci0: <multimedia, audio> at device 20.5 (no driver attached) fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Wireless Mouse Wireless Mouse, rev 1.10/1.01, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. Timecounter "TSC" frequency 1790835886 Hz quality 800 Timecounters tick every 1.000 msec ad0: 114473MB <ST3120026A/8.01> [232581/16/63] at ata0-master UDMA33 acd0: CDROM <SAMSUNG CD-ROM SC-148F/PS05> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a Issues: does not boot with acpi turned on. Special notes: sound not supported yet, usb not tested, gfx (IGP - onboard graphic chips) suppport still flaky (vesa driver works, radeon driver does not). >How-To-Repeat: >Fix: Workaround for acpi problem: In /boot/loader.conf, insert hint.apic.0.disabled="1" Note: it takes a long time (about 15 seconds) after printing the 'acd0...' line before booting continues. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200505101846.j4AIkmgF096635>