From owner-freebsd-questions Wed Mar 12 14:07:19 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id OAA14497 for questions-outgoing; Wed, 12 Mar 1997 14:07:19 -0800 (PST) Received: from gdi.uoregon.edu (gdi.uoregon.edu [128.223.170.30]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA14484 for ; Wed, 12 Mar 1997 14:06:40 -0800 (PST) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.5/8.6.12) with SMTP id OAA00484; Wed, 12 Mar 1997 14:04:33 -0800 (PST) Date: Wed, 12 Mar 1997 14:04:33 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Stan Brown cc: Free BSD Questions list Subject: Re: 2.2 GAMA Etherlink 3 problems In-Reply-To: <199703120311.WAA04468@netcom4.netcom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 11 Mar 1997, Stan Brown wrote: > I am trying to get a 3C589B 3Com Etherlink 3 card working in my Toshiba > Tecra 500. I have obtained and installed teh PAO patchesfor 2.2 GAMA. > The card is set to IRQ 10 and I/O address 300. pccardd will use Card Services and reassign this. > When the machine boots, it finds the card, and corectly identifies it. > When I do an ifconfig ep0 the correct information is displayed. > I can ping the machines IP address OK. Any atempt to ping external > macines fails. tcpdump runing on this device shows no packets on an > active network. > > The card (and adapter cable for thin coak) works corectly when I boot > the mcahine in Windoze 3.11. You may need to select this adapter with -link flags, I seem to remember trouble detecting the transceiver vs. 10BaseT. Does pccardd find it and configure it okay? Is the routing set up properly? What is the ifconfig output from ep0? Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major