Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 01 Mar 2004 05:55:33 -0500
From:      Jeffrey Racine <jracine@maxwell.syr.edu>
To:        freebsd-current@freebsd.org
Subject:   Local package initialization: printerFatal error cannot bind to lpt port '515'...
Message-ID:  <1078138533.41047.454.camel@x1-6-00-b0-d0-c2-67-0e.twcny.rr.com>

next in thread | raw e-mail | index | archive | help
Hi.

I am running current, but have gotten this error message at boot time on
current for some time now, and just can't seem to be able to track it
down. I have searched the archives to no avail, and any insight would be
greatly appreciated. Thanks in advance for your time.

The message is "local package initialization: printerFatal error cannot
bind to lpt port '515'". 

uname, dmesg, printcap, rc.conf etc. follow

-- uname -a

FreeBSD x1-6-00-b0-d0-c2-67-0e.twcny.rr.com 5.2-CURRENT FreeBSD
5.2-CURRENT #0: Sat Feb 28 18:11:03 EST 2004    
root@x1-6-00-b0-d0-c2-67-0e.twcny.rr.com:/usr/obj/usr/src/sys/OPTIPLEX 
i386

-- dmesg

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 5.2-CURRENT #0: Sat Feb 28 18:11:03 EST 2004
   
root@x1-6-00-b0-d0-c2-67-0e.twcny.rr.com:/usr/obj/usr/src/sys/OPTIPLEX
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0792000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07921cc.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (930.24-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 535486464 (510 MB)
avail memory = 518467584 (494 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL GX110  > on motherboard
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fbc30
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 1 INTA is routed to irq 9
pcib0: slot 31 INTD is routed to irq 11
pcib0: slot 31 INTB is routed to irq 10
pcib0: slot 31 INTB is routed to irq 10
agp0: <Intel 82810E (i810E GMCH) SVGA controller> mem
0xff000000-0xff07ffff,0xf8000000-0xfbffffff irq 9 at device 1.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 12 INTA is routed to irq 5
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem
0xfdfffc00-0xfdfffc7f irq 5 at device 12.0 on pci1
xl0: Ethernet address: 00:b0:d0:c2:67:0e
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port 0xffa0-0xffaf at device 31.1
on pci0ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH (82801AA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 10 at
device 31.5 on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <unknown unknown>
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 930237189 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19073MB <Maxtor 5T020H2> [38752/16/63] at ata0-master UDMA66
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
uhci0: <Intel 82801AA (ICH) USB controller> port 0xff80-0xff9f irq 11 at
device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
arp: 24.58.16.1 moved from 00:01:42:1d:e9:54 to 00:01:42:1d:e9:8c on xl0
arp: 24.58.16.1 moved from 00:01:42:1d:e9:8c to 00:01:42:1d:e9:54 on xl0

-- printcap

 
ljet4l|lp|HP LaserJet 4L|:\
        :sd=/var/spool/lpd/ljet4l:\
        :sh:\
        :lp=/dev/lpt0:\
        :if=/usr/local/libexec/magicfilter/ljet4l-filter:\
        :lf=/var/log/lpd-errs:

-- rc.conf

# Created: Sat May  3 04:03:43 2003
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
hostname="x1-6-00-b0-d0-c2-67-0e.twcny.rr.com"
ifconfig_xl0="DHCP"
kern_securelevel_enable="NO"
linux_enable="YES"
moused_enable="YES"
moused_flags="-3"
moused_type="auto"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
lpd_enable="YES"
lprng_enable="YES"

-- Jeff

-- 
Professor J. S. Racine         Phone:  (315) 443-1630
Department of Economics        FAX:    (315) 443-1081
Syracuse University            e-mail: jracine@maxwell.syr.edu
Syracuse, NY, USA 13244-1020
http://www.maxwell.syr.edu/econ/faculty/jeffrey_racine.htm

`The generation of random numbers is too important to be left to
chance.'
        



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1078138533.41047.454.camel>