Date: Tue, 20 Mar 2007 11:44:09 +0100 From: Paolo Pisati <piso@freebsd.org> To: freebsd-usb@freebsd.org Subject: Axe adapter and 6.x: read PHY failed Message-ID: <20070320104409.GA1562@tin.it>
next in thread | raw e-mail | index | archive | help
Hi, since yesterday i'm using a D-Link DUB-E 100 usb<->ethernet adapter on a 6.x box, and i'm experiencing a lot of problems cause after a bit of traffic, the kernel spits: kernel: axe0: read PHY failed then axe0 becomes inoperative, and the only way to ressurect it is to reboot the box (really annoying...). I found a PR about axe (http://www.freebsd.org/cgi/query-pr.cgi?pr=usb/88408), suggesting to play with media and mediaopt, but setting 10/100 or half/full duplex didn't help at all. Any ideas? Am i the only axe user out there? %kldstat Id Refs Address Size Name 1 23 0xc0400000 335848 kernel 2 1 0xc0736000 101f8 geom_eli.ko 3 3 0xc0747000 1b0cc crypto.ko 4 2 0xc0763000 bd04 zlib.ko 5 1 0xc076f000 11dd4 if_ath.ko 6 2 0xc0781000 45bc ath_rate.ko 7 3 0xc0786000 23124 wlan.ko 8 3 0xc07aa000 2ec28 ath_hal.ko 9 1 0xc07d9000 53cc if_axe.ko 10 3 0xc07df000 1d2a0 miibus.ko 11 2 0xc07fd000 246d0 usb.ko 12 1 0xc0822000 6b74 if_vr.ko 13 1 0xc0829000 15ef4 ataraid.ko 14 1 0xc083f000 481c padlock.ko 15 1 0xc0844000 65a60 acpi.ko 16 2 0xc4e15000 e000 ipfw.ko 17 1 0xc4e32000 4000 ipdivert.ko dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #4: Tue Mar 20 01:21:25 CET 2007 root@southcross.wired.org:/usr/obj/usr/src/sys/SOUTHCROSS Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: VIA C3 Nehemiah+RNG+AES (1199.79-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x698 Stepping = 8 Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE> real memory = 1056899072 (1007 MB) avail memory = 1025241088 (977 MB) ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) PadLock: HW support loaded for AES-CBC. acpi0: <VT9174 AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe742c000-0xe742cfff irq 5 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xe7423000-0xe7423fff irq 12 at device 10.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <serial bus, FireWire> at device 13.0 (no driver attached) uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 5 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 12 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 7 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe7429000-0xe74290ff irq 9 at device 16.3 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <VIA VT6202 USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered axe0: vendor 0x2001 product 0x1a00, rev 2.00/0.01, addr 2 miibus0: <MII bus> on axe0 bmtphy0: <BCM5221 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto axe0: Ethernet address: 00:40:05:8f:20:8c axe0: if_start running deferred for Giant isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 17.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <multimedia, audio> at device 17.5 (no driver attached) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem 0xe742a000-0xe742a0ff irq 5 at device 18.0 on pci0 miibus1: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:40:63:df:91:79 atapci1: <Promise PDC20318 SATA150 controller> port 0xe000-0xe03f,0xe400-0xe40f,0xe800-0xe87f mem 0xe742b000-0xe742bfff,0xe7400000-0xe741ffff irq 12 at device 20.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 ata4: <ATA channel 2> on atapci1 ata5: <ATA channel 3> on atapci1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] Timecounter "TSC" frequency 1199794235 Hz quality 800 Timecounters tick every 1.000 msec ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 5 at device 0.0 on cardbus0 ath0: Ethernet address: 00:14:78:75:e4:af ath0: mac 7.9 phy 4.5 radio 5.6 ad0: 157066MB <HDS722516VLAT20 V34OA6MA> at ata0-master UDMA100 ad4: 305245MB <MAXTOR STM3320620AS 3.AAE> at ata2-master SATA150 ad10: 305245MB <MAXTOR STM3320620AS 3.AAE> at ata5-master SATA150 ar0: 305245MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad10 at ata5-master Trying to mount root from ufs:/dev/ad0s1a ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled GEOM_ELI: Device ar0.eli created. GEOM_ELI: Encryption: AES-CBC 128 GEOM_ELI: Crypto: hardware bye, P.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070320104409.GA1562>