Date: Wed, 28 Sep 2005 13:55:09 +0200 From: "Poul-Henning Kamp" <phk@phk.freebsd.dk> To: ticso@cicely.de Cc: alpha@freebsd.org Subject: Re: FreeBSD 6.0/alpha estbuild available with limited EISA probing Message-ID: <874.1127908509@critter.freebsd.dk> In-Reply-To: Your message of "Wed, 28 Sep 2005 13:03:08 %2B0200." <20050928110308.GK54923@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <20050928110308.GK54923@cicely12.cicely.de>, Bernd Walter writes:
>On Mon, Sep 26, 2005 at 08:59:02AM +0200, Poul-Henning Kamp wrote:
>> In message <20050926064449.GA19636@freebie.xs4all.nl>, Wilko Bulte writes:
>>
>> >Please try a testbuild based on BETA5 that is currently uploading
>> >to ftp-master.
>>
>> I tried -current/GENERIC and it still fails on my AlphaServer 1000A
>> 5/400, 400MHz:
>>
>> fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81300000
>> fxp0: using memory space register mapping
>> fxp0: PCI IDs: 8086 1229 8086 000c 0008
>> fxp0: Dynamic Standby mode is disabled
>> miibus0: <MII bus> on fxp0
>> inphy0: <i82555 10/100 media interface> on miibus0
>> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> fxp0: bpf attached
>> fxp0: Ethernet address: 00:d0:b7:49:e6:c9
>> fxp0: interrupting at CIA irq 5
>> fxp0: [MPSAFE]
>>
>> halted CPU 0
>>
>> halt code = 7
>> machine check while in PAL mode
>> PC = 18100
>> >>>
>
>Can you please supply a boot -v.
>This panic could be a PCI problem as well.
OK boot -vs
Entering /boot/kernel/kernel at 0xfffffc000034c5e0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #1: Mon Sep 26 06:42:40 UTC 2005
root@monster.freebsd.dk:/monster/src/sys/alpha/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000a18000.
AlphaServer 1000/1000A
AlphaServer 1000A 5/400, 400MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000600020117
real memory = 182484992 (174 MB)
Physical memory chunk(s):
0x00a38000 - 0x0acf5fff, 170647552 bytes (20831 pages)
avail memory = 168828928 (161 MB)
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
cia0: <2117x Core Logic chipset>
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x05
bus=0, slot=7, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0001, revid=0x02
bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0a80, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x27 (9750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0002, revid=0x24
bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[10]: type 4, range 32, base 00010000, size 7, enabled
map[14]: type 1, range 32, base 81301000, size 7, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 81300000, size 12, enabled
map[14]: type 4, range 32, base 00010080, size 6, enabled
map[18]: type 1, range 32, base 81100000, size 20, enabled
eisab0: <PCI-EISA bridge> at device 7.0 on pci0
eisa0: <EISA bus> on eisab0
mainboard0: <DEC5000 (System Board)> at slot 0 on eisa0
eisa0: CPQ3111 (0x0e113111) at slot 1 (no driver attached)
isa0: <ISA bus> on eisab0
pcib1: <PCI-PCI bridge> at device 8.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0x81000000-0x810fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib1
pci2: physical bus=2
found-> vendor=0x1077, dev=0x1020, revid=0x02
bus=2, slot=0, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
map[10]: type 4, range 32, base 00009000, size 8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
map[14]: type 1, range 32, base 81010000, size 12, enabled
pcib1: (null) requested memory range 0x81010000-0x81010fff: good
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.9
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x9000-0x90ff mem 0x81010000-
0x81010fff irq 0 at device 0.0 on pci2
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x81010000
isp0: using Memory space register mapping
isp0: interrupting at CIA irq 0
isp0: [GIANT-LOCKED]
isp0: Board Type 1020A, Chip Revision 0x2, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
de0: <Digital 21040 Ethernet> port 0x10000-0x1007f mem 0x81301000-0x8130107f irq
3 at device 12.0 on pci0
de0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x81301000
de0: DEC 21040 [10Mb/s] pass 2.4
de0: bpf attached
de0: Ethernet address: 00:00:f8:21:89:2f
de0: interrupting at CIA irq 3
de0: [MPSAFE]
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x10080-0x100bf mem 0x81300000-0x81300
fff,0x81100000-0x811fffff irq 5 at device 13.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81300000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:d0:b7:49:e6:c9
fxp0: interrupting at CIA irq 5
fxp0: [MPSAFE]
halted CPU 0
halt code = 7
machine check while in PAL mode
PC = 18100
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
phk@FreeBSD.ORG | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?874.1127908509>