Date: Thu, 03 Feb 2011 21:36:32 +0100 From: David Demelier <demelier.david@gmail.com> To: freebsd-questions@freebsd.org Subject: Can't burn with ahci(4) and cdrecord Message-ID: <4D4B11D0.3050709@gmail.com>
next in thread | raw e-mail | index | archive | help
Hello, I tried to burn a little iso with ahci(4) instead of old ata drivers and it fails to burn with : markand@Melon ~ $ sudo cdrecord downloads/ubuntu-10.10-desktop-i386.iso cdrecord: No write mode specified. cdrecord: Assuming -sao mode. cdrecord: If your drive does not accept -sao, try -tao. cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.2) Copyright (C) 1995-2010 Jörg Schilling Using libscg version 'schily-0.9'. No target specified, trying to find one... Using dev=1,0,0. Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'hp ' Identifikation : 'DVDRAM GT20L ' Revision : 'DC05' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP Starting to write CD/DVD/BD at speed 24 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Turning BURN-Free off cdrecord: WARNING: Drive returns wrong startsec (0) using -150 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 FF FF FF 6A 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 65536 cmd finished after 13.147s timeout 200s write track pad data: error after 0 bytes BFree: 597 K BSize: 597 K cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 65536 cmd finished after 0.001s timeout 200s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. This is happening on my HP Probook 4510s with 8.2-RC2 amd64. -- David Demelier
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D4B11D0.3050709>