Date: Sat, 23 May 2020 17:31:48 +0000 (UTC) From: Santhosh Raju <fox@FreeBSD.org> To: ports-committers@freebsd.org, svn-ports-all@freebsd.org, svn-ports-head@freebsd.org Subject: svn commit: r536325 - head/multimedia/din Message-ID: <202005231731.04NHVmG0032199@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: fox Date: Sat May 23 17:31:47 2020 New Revision: 536325 URL: https://svnweb.freebsd.org/changeset/ports/536325 Log: audio/din: Updates to 47 Changes since 46.3: DIN Is Noise 47 @ Chennai, India + Menu > Drone Params now split into 3 tabs: + Modulation: + has controls to edit drone modulation parameters like AM/FM depth, BPM + Visual: + has controls to edit drone trail length, handle size, connection stiffness (see below), colors (see below) etc + Motion: + controls to edit drone parameters like velocity, acceleration, drones per minute, lifetime etc + On the mouse slider + when you can slide both horizontally and vertically: + press SHIFT to slide just vertically + press CTRL to slide just horizontally /* connect and disconnect drones + Workflow: + select a bunch of drones (eg., Menu > Drone Tools > Select all drones) + Menu > Drone Tools > Connect + DIN connects drones in selection order + points one drone to next + last drone points in the direction second last drone points + To select drones in desired order, select drones one at a time by click+moving a box around a drone and use SHIFT / CTRL keys while selecting to add to existing selection or remove a drone from selection + Steps @ 1 connects drones successively, this is default Steps @ 2 connects alternate drones Steps @ 1 2 does both try other steps sequences: eg., 1 3 5 OR 1 2 4 etc !note! separate steps with SPACE not comma + Just select a drone and move (Menu > Drone Tools > Move) and all the connected drones move to keep their original distance on connection. 'But then one lizard (or iguana) moved, and all moved' - VS Naipaul, Among the Believers + Use Connection Stiffness parameter to control the 'elasticity' of the connections (Menu > Drone Params > Visual) + This is a global parameter, affects all connections among all drones + Menu > Drone Tools > Disconnect to disconnect the connected drones + Select a drone in the middle of a chain and disconnect splits the chain in two + Select the 'head' drones of two different chains and connect to merge the two chains into one /* new curve & curve editor to sculpt amplitude (aka depth) & bpm of drone pendulum's drones + access using Menu > Editors > Drone Pendulum + edit curves even after creating drone pendulums! + affects drone pendulums selected drones belong to + use Menu > Overlay Instrument on the editor to see the effects of the edits while making them. /* new color sliders to set the color of selected drones + 2 sets of 3 sliders (1 for Red, Green and Blue). + Top set called Top + Bottom set called Bottom + Select some drones and + change color to Top to set color of all selected drones to the RGB of Top sliders + change color to Bottom to set color of all selected drones to RGB of Bottom sliders + change color to Blend to set color of all selected drones to RGB blended from Top to Bottom sliders + first selected drone color is from the Top sliders + last selected drone is from the Bottom sliders + other drones take inbetween colors + To select drones in desired order, select drones one at a time by click+moving a box around a drone and use SHIFT / CTRL keys while selecting to add or remove drone to an existing selection + change color to Random to set random colors on all selected drones + not truly random but a random color between RGB of Top and Bottom sliders + useful as colors are random but still from a certain part of the spectrum + If drones are noise, their color is grayscale, derived from just the Red channel of Top and/or/both Bottom sliders, based on the chosen scheme. + If you edit a color slider, DIN hides the menu so you can see the edits better, hit ESC or click on Close to finish/abort /* abort octave shift + useful to take the key note away from 'piano notes' into 'weird' pitches yet still have 'scales' based on this new key 'note'. + without Abort this was still possible by editing the octave shift curve (Menu > Editors > Octave Shift) + to set the key back to a note, goto Settings screen and use the Key spinner + click Menu > Misc > Abort on Microtonal-Keyboard, Mondrian and Binaural Drones instruments + or press SHIFT + ESC + click Abort button on Keyboard-Keyboard + or press n /* edit arrow width, depth for each drone + until DIN46, this was global + very useful for snake/centepede like visualisations of connected drones * scale drones * press CTRL to scale along horizontal * press SHIFT to scale along vertical + moved Scale, Rotate drones to join Move in Menu > Drone Tools + SHIFT + e to scale selected drones + CTRL + e to rotate selected drones + press ` to flip between current instrument and last used curve editor + detach Spinners from Menu when using the < and > buttons to decrease/increase values * Optimised GUI controls * field, spinner etc \0/ fixed crash when browsing waveforms on keyboard-keyboard \0/ fixed search field in countries \0/ fixed value field in number for bits of char Modified: head/multimedia/din/Makefile head/multimedia/din/distinfo Modified: head/multimedia/din/Makefile ============================================================================== --- head/multimedia/din/Makefile Sat May 23 17:26:50 2020 (r536324) +++ head/multimedia/din/Makefile Sat May 23 17:31:47 2020 (r536325) @@ -1,7 +1,7 @@ # $FreeBSD$ PORTNAME= din -PORTVERSION= 46.3 +PORTVERSION= 47 CATEGORIES= multimedia MASTER_SITES= https://archive.org/download/dinisnoise_source_code/ Modified: head/multimedia/din/distinfo ============================================================================== --- head/multimedia/din/distinfo Sat May 23 17:26:50 2020 (r536324) +++ head/multimedia/din/distinfo Sat May 23 17:31:47 2020 (r536325) @@ -1,3 +1,3 @@ -TIMESTAMP = 1589705687 -SHA256 (din-46.3.tar.gz) = 547163242ae294170d610d6b1f65ab3b81cab0f9289d8ed94df2860ab89392f1 -SIZE (din-46.3.tar.gz) = 3655646 +TIMESTAMP = 1590254234 +SHA256 (din-47.tar.gz) = d9fcbeec608da09fc07cdc61f144424986de1a0cec9500a5b4585bfc7ab62200 +SIZE (din-47.tar.gz) = 3667413
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202005231731.04NHVmG0032199>