Date: Mon, 28 Aug 2000 12:35:14 -0400 From: Allen Landsidel <all@biosys.net> To: freebsd-questions@freebsd.org Subject: install woes with 4.1-RELEASE Message-ID: <4.3.2.7.2.20000828122053.00b35bf0@mail.megapathdsl.net>
next in thread | raw e-mail | index | archive | help
Trying to install 4.1 from the floppy to my laptop, I get the following..
atapci0: Busmastering DMA not supported
panic: resource_list_alloc: resource entry is busy
The laptop is a Twinhead 9133TV, Pentium-133 machine.
The pcic is a cirrus logic, port 0xFCFC, irq 11.
I've been running 3.4-RELEASE + PAO on the machine for six months or so
without a problem.. any ideas what that problem is and what I can do to
alleviate it this early in the install?
I've tried disabiling every device except for the bare minimum in the
kernel config and same story.. hmm.. here is a dmesg from the machine while
3.4-R/PAO is up and running.
//.....
ns2# dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-RELEASE #0: Tue Feb 29 13:41:27 GMT 2000
root@:/usr/src/sys/compile/VISHNU
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (133.22-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
config> di pcic0
config> di pcic1
config> di awi0
config> en pcic0
config> po pcic0 0xfcfc
config> ir pcic0 11
config> f pcic0 0
config> q
avail memory = 45297664 (44236K bytes)
Preloaded elf kernel "kernel" at 0xc0392000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc039209c.
Probing for devices on PCI bus 0:
chip0: <SiS 85c501> rev 0x00 on pci0.0.0
chip1: <SiS 85c503> rev 0x01 on pci0.1.0
chip2: <SiS 85c601> rev 0x01 int a irq 14 on pci0.1.1
vga0: <Trident model 9660 VGA-compatible display device> rev 0xd3 int a irq
255 on pci0.17.0
pcic0: <Cirrus Logic PD6729/6730 PC-Card Controller> rev 0xfe int a irq 255
on pci0.19.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
wi0 not found
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <TOSHIBA MK1403MAV>
wd0: 1376MB (2818368 sectors), 2796 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-1502B/2906>, removable, accel,
dma, iordy
acd0: drive speed 1722KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 not found
ep0 not found at 0x300
sn0 not found at 0x300
wlp0 not found at 0x300
cnw0 not found at 0x300
ux0 not found at 0x300
xe0: probe
xe0 not found
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
aic0 not found
pcic0 at 0xfcfc-0xfcfd irq 11 on eisa slot 15
PC-Card ctlr(0) Cirrus Logic PD6729/6730 [i82365 compatible mode] (5 mem &
2 I/O windows)
pcic0: slot 0 controller I/O address 0xfcfc
pcic0: slot 1 controller I/O address 0xfcfc
pcic1: sharing irq 11 with other pcic
pcic1 not found at 0x3e4
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
Initializing PC-card drivers: ux aic fdc gp hss cnw ed ep fe sn wi wlp xe
joy scc sio wdc
Intel Pentium detected, installing workaround for F00F bug
IP packet filtering initialized, divert enabled, rule-based forwarding
disabled, logging disabled
changing root device to wd0s1a
Card inserted, slot 1
card1: assign ep0 iobase 0x240 irq 3
ep0: utp/bnc[*UTP*] address 00:60:97:93:ce:c3
//....
Thanks for any input.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.2.20000828122053.00b35bf0>