Date: Tue, 27 Nov 2018 20:40:44 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 233579] FreeBSD 12.0-RC2 r340839 GENERIC powerpc needs kern.smp.disabled=1 to boot after install Message-ID: <bug-233579-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D233579 Bug ID: 233579 Summary: FreeBSD 12.0-RC2 r340839 GENERIC powerpc needs kern.smp.disabled=3D1 to boot after install Product: Base System Version: CURRENT Hardware: powerpc OS: Any Status: New Severity: Affects Only Me Priority: --- Component: conf Assignee: bugs@FreeBSD.org Reporter: dclarke@blastwave.org This is quite baffling and I have tried the test over and over.=20 If I boot the RC2 DVD then I get all four processor cores available and after install there is no way to boot the system unless I set the variable kern.smp.disabled=3D1 at the boot loader.=20 The dmesg output from the DVD looks like so :=20 ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RC2 r340839 GENERIC powerpc gcc version 4.2.1 20070831 patched [FreeBSD] VT(ofwfb): resolution 1280x1024 cpu0: IBM PowerPC 970MP revision 1.1, 2500.28 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> real memory =3D 8541921280 (8146 MB) avail memory =3D 8152719360 (7775 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs arc4random: no preloaded entropy cache random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> on nexus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pcr0: <PPC 970 Power Control Register> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 pcr1: <PPC 970 Power Control Register> on cpu1 cpu2: <Open Firmware CPU> on cpulist0 pcr2: <PPC 970 Power Control Register> on cpu2 cpu3: <Open Firmware CPU> on cpulist0 pcr3: <PPC 970 Power Control Register> on cpu3 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 452, bank1 generation 453 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwb= us0 unin0: Version 66 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0 ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0 max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0 max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0 htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 pci0: <OFW PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0xa1000000-0xa1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa0ffffff irq 3 at device 0.0 on pci0 vgapci0: Boot video device pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib1: 86 HT IRQs on device 7.0 pci1: <OFW PCI bus> on pcib1 pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 pci3: <OFW PCI bus> on pcib3 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3 bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus0: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:14:51:64:67:10 bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3 bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus1: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:14:51:64:67:11 pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 pci4: <OFW PCI bus> on pcib4 pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1 pci5: <OFW PCI bus> on pcib5 pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1 pci6: <OFW PCI bus> on pcib6 pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1 pci7: <OFW PCI bus> on pcib7 pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1 pci8: <OFW PCI bus> on pcib8 gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0= on pci8 gem0: invalid MAC address device_attach: gem0 attach returned 6 pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1 pci9: <OFW PCI bus> on pcib9 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on = pci9 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0 uart0: <z8530, channel A> on scc0 uart1: <z8530, channel B> on scc0 iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1 iicbus1: <unknown card> at addr 0x24 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0 ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at de= vice 11.0 on pci9 usbus0 on ohci0 ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at de= vice 11.1 on pci9 usbus1 on ohci1 ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70= at device 11.2 on pci9 usbus2: EHCI version 1.0 usbus2 on ehci0 pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1 pci10: <OFW PCI bus> on pcib10 atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq = 10 at device 12.0 on pci10 pcib1: failed to reserve resource for pcib10 atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci10 fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff ir= q 39 at device 14.0 on pci10 fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:24:ff:fe:e5:13:d0 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:24:e5:13:d0 fwe0: Ethernet address: 02:11:24:e5:13:d0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound =3D 0x00000000 fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D1, CYCLEMAS= TER mode smu0: <Apple System Management Unit> on ofwbus0 smu0: registered as a time-of-day clock, resolution 0.001000s iichb2: <SMU I2C controller> on smu0 iicbus2: <OFW I2C bus> on iichb2 iic2: <I2C generic I/O> on iicbus2 smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2 smusat1: <SMU Satellite Sensors> at addr 0xb2 on iicbus2 iicbus2: <unknown card> at addr 0xd4 iichb3: <SMU I2C controller> on smu0 iicbus3: <OFW I2C bus> on iichb3 iic3: <I2C generic I/O> on iicbus3 Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me) firewire0: bus manager 1 bge0: link state changed to DOWN max66900: 2 sensors detected. max66901: 2 sensors detected. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <NEC OHCI root HUB> at usbus0 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <NEC OHCI root HUB> at usbus1 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <NEC EHCI root HUB> at usbus2 uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub2: 5 ports with 5 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <Hitachi HDS725050KLA360 K2ABC20A> ATA-7 SATA 1.x device ada0: Serial Number KRVN23ZAHA5DBD ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device cd0: Serial Number M0063NE3358 cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: 4482MB (2295104 2048 byte sectors) SMP: AP CPU #1 launched SMP: AP CPU #2 launched SMP: AP CPU #3 launched arc4random: no preloaded entropy cache Trying to mount root from cd9660:/dev/iso9660/12_0_RC2_POWERPC64_DVD [ro]... ugen1.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus1 ukbd0 on uhub1 ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 kbd1 at ukbd0 uhid0 on uhub1 uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 random: unblocking device. arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache lo0: link state changed to UP Note that all four processor cores are available when I boot the DVD but there seems to be no way to get the same result when I boot from the installed image.=20 After install onto a clean disk ( wiped with dd form the bootable DVD ) the system only boots to a certain point wherein I see the disk information and then it halts or freezes. Fans roar to full maximum noise level and then the machine has to be powered off or unplugged. If I set kern.smp.disabled=3D1 then it boots normally thus :=20 root@eris:~ #=20 root@eris:~ # uname -aU FreeBSD eris 12.0-RC2 FreeBSD 12.0-RC2 r340839 GENERIC powerpc 1200086 root@eris:~ # uptime=20 8:29PM up 9 mins, 1 user, load averages: 0.55, 0.52, 0.33 root@eris:~ #=20 root@eris:~ # getconf -a | grep "NPROC" getconf: sysconf: _POSIX_FILE_LOCKING: Invalid argument getconf: sysconf: _POSIX_THREAD_SPORADIC_SERVER: Invalid argument getconf: sysconf: _POSIX_TRACE_EVENT_FILTER: Invalid argument getconf: sysconf: _POSIX_TRACE_INHERIT: Invalid argument getconf: sysconf: _POSIX_TRACE_LOG: Invalid argument getconf: sysconf: _XOPEN_VERSION: Invalid argument NPROCESSORS_CONF: 1 NPROCESSORS_ONLN: 1 root@eris:~ #=20 root@eris:~ # dmesg=20 ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RC2 r340839 GENERIC powerpc gcc version 4.2.1 20070831 patched [FreeBSD] VT(ofwfb): resolution 1280x1024 cpu0: IBM PowerPC 970MP revision 1.1, 2500.30 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> real memory =3D 8542404608 (8146 MB) avail memory =3D 8152752128 (7775 MB) random: unblocking device. random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> on nexus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pcr0: <PPC 970 Power Control Register> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 pcr1: <PPC 970 Power Control Register> on cpu1 cpu2: <Open Firmware CPU> on cpulist0 pcr2: <PPC 970 Power Control Register> on cpu2 cpu3: <Open Firmware CPU> on cpulist0 pcr3: <PPC 970 Power Control Register> on cpu3 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 452, bank1 generation 453 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwb= us0 unin0: Version 66 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0 ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0 max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0 max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0 htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 pci0: <OFW PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0xa1000000-0xa1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa0ffffff irq 3 at device 0.0 on pci0 vgapci0: Boot video device pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib1: 86 HT IRQs on device 7.0 pci1: <OFW PCI bus> on pcib1 pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 pci3: <OFW PCI bus> on pcib3 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3 bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus0: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:14:51:64:67:10 bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3 bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus1: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:14:51:64:67:11 pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 pci4: <OFW PCI bus> on pcib4 pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1 pci5: <OFW PCI bus> on pcib5 pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1 pci6: <OFW PCI bus> on pcib6 pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1 pci7: <OFW PCI bus> on pcib7 pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1 pci8: <OFW PCI bus> on pcib8 gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0= on pci8 gem0: invalid MAC address device_attach: gem0 attach returned 6 pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1 pci9: <OFW PCI bus> on pcib9 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on = pci9 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0 uart0: <z8530, channel A> on scc0 uart1: <z8530, channel B> on scc0 iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1 iicbus1: <unknown card> at addr 0x24 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0 ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at de= vice 11.0 on pci9 usbus0 on ohci0 ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at de= vice 11.1 on pci9 usbus1 on ohci1 ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70= at device 11.2 on pci9 usbus2: EHCI version 1.0 usbus2 on ehci0 pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1 pci10: <OFW PCI bus> on pcib10 atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq = 10 at device 12.0 on pci10 pcib1: failed to reserve resource for pcib10 atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci10 fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff ir= q 39 at device 14.0 on pci10 fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:24:ff:fe:e5:13:d0 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:24:e5:13:d0 fwe0: Ethernet address: 02:11:24:e5:13:d0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound =3D 0x00000000 fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D1, CYCLEMAS= TER mode smu0: <Apple System Management Unit> on ofwbus0 smu0: registered as a time-of-day clock, resolution 0.001000s iichb2: <SMU I2C controller> on smu0 iicbus2: <OFW I2C bus> on iichb2 iic2: <I2C generic I/O> on iicbus2 smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2 smusat1: <SMU Satellite Sensors> at addr 0xb2 on iicbus2 iicbus2: <unknown card> at addr 0xd4 iichb3: <SMU I2C controller> on smu0 iicbus3: <OFW I2C bus> on iichb3 iic3: <I2C generic I/O> on iicbus3 Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me)=20 firewire0: bus manager 1=20 bge0: link state changed to UP max66900: 2 sensors detected. max66901: 2 sensors detected. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <NEC OHCI root HUB> at usbus0 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <NEC OHCI root HUB> at usbus1 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <NEC EHCI root HUB> at usbus2 uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub2: 5 ports with 5 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <Hitachi HDS725050KLA360 K2ABC20A> ATA-7 SATA 1.x device ada0: Serial Number KRVN23ZAHA5DBD ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) Trying to mount root from ufs:/dev/ada0s3 [rw]... cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device cd0: Serial Number M0063NE3358 cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: 4482MB (2295104 2048 byte sectors) ugen1.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus1 ukbd0 on uhub1 ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 kbd1 at ukbd0 uhid0 on uhub1 uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) module_register: cannot register gem/miibus from if_gem.ko; already loaded = from kernel Module gem/miibus failed to register: 17 module_register: cannot register pci/gem from if_gem.ko; already loaded from kernel Module pci/gem failed to register: 17 root@eris:~ #=20 Note this is a fresh install :=20 root@eris:~ #=20 root@eris:~ # last admsys pts/0 172.16.35.3 Tue Nov 27 20:28 still logged = in boot time Tue Nov 27 20:21 utx.log begins Tue Nov 27 20:21:07 UTC 2018 root@eris:~ # --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-233579-227>