From owner-svn-src-stable-10@freebsd.org Wed Jan 27 22:31:10 2016 Return-Path: Delivered-To: svn-src-stable-10@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id C3010A6F880; Wed, 27 Jan 2016 22:31:10 +0000 (UTC) (envelope-from marius@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 7CEFA1372; Wed, 27 Jan 2016 22:31:10 +0000 (UTC) (envelope-from marius@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id u0RMV9Pd019404; Wed, 27 Jan 2016 22:31:09 GMT (envelope-from marius@FreeBSD.org) Received: (from marius@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id u0RMV8LW019394; Wed, 27 Jan 2016 22:31:08 GMT (envelope-from marius@FreeBSD.org) Message-Id: <201601272231.u0RMV8LW019394@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: marius set sender to marius@FreeBSD.org using -f From: Marius Strobl Date: Wed, 27 Jan 2016 22:31:08 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org Subject: svn commit: r294958 - in stable/10: share/man/man4 sys/dev/e1000 sys/dev/ixgb sys/dev/netmap X-SVN-Group: stable-10 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-src-stable-10@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: SVN commit messages for only the 10-stable src tree List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 27 Jan 2016 22:31:11 -0000 Author: marius Date: Wed Jan 27 22:31:08 2016 New Revision: 294958 URL: https://svnweb.freebsd.org/changeset/base/294958 Log: Sync the e1000 drivers with what's in head as of r294327, modulo parts that don't apply to stable/10 (driver API, if_inc_counter(), RSS changes etc.) and modulo r287465 (which reportedly breaks igb(4)), i. e. assorted fixes and improvements only: o MFC r267385 (partial): - Don't compare bus_dma map pointers for static DMA allocations against NULL to determine if bus_dmamap_unload() or bus_dmamem_free() should be called. Instead, check the associated bus and virtual addresses. - Don't clear static DMA maps to NULL. o MFC r284933: Delete the refernce to VLAN handling being disabled by default. This is no longer the case. [1] o MFC r285639: Add an adapter CORE lock in the DDB hook em_dump_queue to avoid WITNESS panic in em_init_locked() while debugging. o MFC r285879: - Remove unused txd_saved. - Intialize txd_upper, txd_lower and txd_used at declaration. o MFC r286162: Free mbufs when busdma loading fails. o MFC r286829: Add capability to disable CRC stripping as it breaks IPMI/BMC capabilities on certain adatpers. [2] o MFC r286831: [3] - Increase EM_MAX_SCATTER to 64 such that the size of em_xmit():: segs[EM_MAX_SCATTER] doesn't get overrun by things like NFS that can and do shove more than 32 segs when being used with em(4) and TSO4. - Update tso handling code in em_xmit() with update from jhb@ - Set if_hw_tsomax, if_hw_tsomaxsegcount and if_hw_tsomaxsegsize to appropriate values. - Define a TSO workaround "magic" number of 4 that is used to avoid an alignment issue in hardware. - Change a couple of integer values that were used as booleans to actual bool types. - Ensure that em_enable_intr() enables the appropriate mask of interrupts and not just a hardcoded define of values. o MFC r286832: e1000/if_lem.c bump to 1.1.0 o MFC r286833: Bump all copywrite dates to 2015. o MFC r287112: Style/whitespace cleanup in shared/common code. o MFC r293331: - Switch em(4) to the extended RX descriptor format. - Split rxbuffer and txbuffer apart to support the new RX descriptor format structures. Move rxbuffer manipulation to em_setup_rxdesc() to unify the new behavior changes. - Add a RSSKEYLEN macro for help in generating the RSSKEY data structures in the card. - Change em_receive_checksum() to process the new rxdescriptor format status bit. o MFC r293332: Disable the reuse of checksum offload context descriptors in the case of multiple queues in em(4). Document errata in the code. o MFC r293854: Given that em(4), lem(4) and igb(4) hardware doesn't require the alignment guarantees provided by m_defrag(9), use m_collapse(9) instead for performance reasons. While at it, sanitize the statistics softc members, i. e. retire unused ones and add SYSCTL nodes missing for actually used ones. PR: 118693 [1], 161277 [2], 195078 [3], 199174 [3], 200221 [3] Modified: stable/10/share/man/man4/em.4 stable/10/sys/dev/e1000/e1000_80003es2lan.c stable/10/sys/dev/e1000/e1000_80003es2lan.h stable/10/sys/dev/e1000/e1000_82540.c stable/10/sys/dev/e1000/e1000_82541.c stable/10/sys/dev/e1000/e1000_82541.h stable/10/sys/dev/e1000/e1000_82542.c stable/10/sys/dev/e1000/e1000_82543.c stable/10/sys/dev/e1000/e1000_82543.h stable/10/sys/dev/e1000/e1000_82571.c stable/10/sys/dev/e1000/e1000_82571.h stable/10/sys/dev/e1000/e1000_82575.c stable/10/sys/dev/e1000/e1000_82575.h stable/10/sys/dev/e1000/e1000_api.c stable/10/sys/dev/e1000/e1000_api.h stable/10/sys/dev/e1000/e1000_defines.h stable/10/sys/dev/e1000/e1000_hw.h stable/10/sys/dev/e1000/e1000_i210.c stable/10/sys/dev/e1000/e1000_i210.h stable/10/sys/dev/e1000/e1000_ich8lan.c stable/10/sys/dev/e1000/e1000_ich8lan.h stable/10/sys/dev/e1000/e1000_mac.c stable/10/sys/dev/e1000/e1000_mac.h stable/10/sys/dev/e1000/e1000_manage.c stable/10/sys/dev/e1000/e1000_manage.h stable/10/sys/dev/e1000/e1000_mbx.c stable/10/sys/dev/e1000/e1000_mbx.h stable/10/sys/dev/e1000/e1000_nvm.c stable/10/sys/dev/e1000/e1000_nvm.h stable/10/sys/dev/e1000/e1000_osdep.c stable/10/sys/dev/e1000/e1000_osdep.h stable/10/sys/dev/e1000/e1000_phy.c stable/10/sys/dev/e1000/e1000_phy.h stable/10/sys/dev/e1000/e1000_regs.h stable/10/sys/dev/e1000/e1000_vf.c stable/10/sys/dev/e1000/e1000_vf.h stable/10/sys/dev/e1000/if_em.c stable/10/sys/dev/e1000/if_em.h stable/10/sys/dev/e1000/if_igb.c stable/10/sys/dev/e1000/if_igb.h stable/10/sys/dev/e1000/if_lem.c stable/10/sys/dev/e1000/if_lem.h stable/10/sys/dev/ixgb/if_ixgb.c stable/10/sys/dev/netmap/if_em_netmap.h Directory Properties: stable/10/ (props changed) Modified: stable/10/share/man/man4/em.4 ============================================================================== --- stable/10/share/man/man4/em.4 Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/share/man/man4/em.4 Wed Jan 27 22:31:08 2016 (r294958) @@ -31,7 +31,7 @@ .\" .\" $FreeBSD$ .\" -.Dd October 11, 2011 +.Dd August 16, 2015 .Dt EM 4 .Os .Sh NAME @@ -205,6 +205,11 @@ Tunables can be set at the prompt before booting the kernel or stored in .Xr loader.conf 5 . .Bl -tag -width indent +.It Va hw.em.disable_crc_stripping +Disable or enable hardware stripping of CRC field. +This is mostly useful on BMC/IPMI shared interfaces where stripping the CRC +causes remote access over IPMI to fail. +Default 0 (enabled). .It Va hw.em.eee_setting Disable or enable Energy Efficient Ethernet. Default 1 (disabled). @@ -307,10 +312,5 @@ The driver was written by .An Intel Corporation Aq freebsd@intel.com . .Sh BUGS -Hardware-assisted VLAN processing is disabled by default. -You can enable it on an -.Nm -interface using -.Xr ifconfig 8 . .Pp Activating EM_MULTIQUEUE support requires MSI-X features. Modified: stable/10/sys/dev/e1000/e1000_80003es2lan.c ============================================================================== --- stable/10/sys/dev/e1000/e1000_80003es2lan.c Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/sys/dev/e1000/e1000_80003es2lan.c Wed Jan 27 22:31:08 2016 (r294958) @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2013, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without Modified: stable/10/sys/dev/e1000/e1000_80003es2lan.h ============================================================================== --- stable/10/sys/dev/e1000/e1000_80003es2lan.h Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/sys/dev/e1000/e1000_80003es2lan.h Wed Jan 27 22:31:08 2016 (r294958) @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2013, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without Modified: stable/10/sys/dev/e1000/e1000_82540.c ============================================================================== --- stable/10/sys/dev/e1000/e1000_82540.c Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/sys/dev/e1000/e1000_82540.c Wed Jan 27 22:31:08 2016 (r294958) @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2011, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without Modified: stable/10/sys/dev/e1000/e1000_82541.c ============================================================================== --- stable/10/sys/dev/e1000/e1000_82541.c Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/sys/dev/e1000/e1000_82541.c Wed Jan 27 22:31:08 2016 (r294958) @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2011, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without @@ -49,34 +49,34 @@ static s32 e1000_init_mac_params_82541( static s32 e1000_reset_hw_82541(struct e1000_hw *hw); static s32 e1000_init_hw_82541(struct e1000_hw *hw); static s32 e1000_get_link_up_info_82541(struct e1000_hw *hw, u16 *speed, - u16 *duplex); + u16 *duplex); static s32 e1000_phy_hw_reset_82541(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82541(struct e1000_hw *hw); static s32 e1000_check_for_link_82541(struct e1000_hw *hw); static s32 e1000_get_cable_length_igp_82541(struct e1000_hw *hw); static s32 e1000_set_d3_lplu_state_82541(struct e1000_hw *hw, - bool active); + bool active); static s32 e1000_setup_led_82541(struct e1000_hw *hw); static s32 e1000_cleanup_led_82541(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82541(struct e1000_hw *hw); static s32 e1000_read_mac_addr_82541(struct e1000_hw *hw); static s32 e1000_config_dsp_after_link_change_82541(struct e1000_hw *hw, - bool link_up); + bool link_up); static s32 e1000_phy_init_script_82541(struct e1000_hw *hw); static void e1000_power_down_phy_copper_82541(struct e1000_hw *hw); -static const u16 e1000_igp_cable_length_table[] = - { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25, - 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40, - 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60, - 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90, - 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, - 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, - 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120}; +static const u16 e1000_igp_cable_length_table[] = { + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 10, 10, 10, 10, 10, + 10, 10, 20, 20, 20, 20, 20, 25, 25, 25, 25, 25, 25, 25, 30, 30, 30, 30, + 40, 40, 40, 40, 40, 40, 40, 40, 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, + 60, 60, 60, 60, 60, 60, 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, + 80, 90, 90, 90, 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, + 100, 100, 100, 100, 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, + 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 120, 120, + 120, 120, 120, 120, 120, 120, 120, 120}; #define IGP01E1000_AGC_LENGTH_TABLE_SIZE \ - (sizeof(e1000_igp_cable_length_table) / \ - sizeof(e1000_igp_cable_length_table[0])) + (sizeof(e1000_igp_cable_length_table) / \ + sizeof(e1000_igp_cable_length_table[0])) /** * e1000_init_phy_params_82541 - Init PHY func ptrs. @@ -89,23 +89,23 @@ static s32 e1000_init_phy_params_82541(s DEBUGFUNC("e1000_init_phy_params_82541"); - phy->addr = 1; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 10000; - phy->type = e1000_phy_igp; + phy->addr = 1; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 10000; + phy->type = e1000_phy_igp; /* Function Pointers */ - phy->ops.check_polarity = e1000_check_polarity_igp; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; - phy->ops.get_cable_length = e1000_get_cable_length_igp_82541; - phy->ops.get_cfg_done = e1000_get_cfg_done_generic; - phy->ops.get_info = e1000_get_phy_info_igp; - phy->ops.read_reg = e1000_read_phy_reg_igp; - phy->ops.reset = e1000_phy_hw_reset_82541; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82541; - phy->ops.write_reg = e1000_write_phy_reg_igp; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_82541; + phy->ops.check_polarity = e1000_check_polarity_igp; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; + phy->ops.get_cable_length = e1000_get_cable_length_igp_82541; + phy->ops.get_cfg_done = e1000_get_cfg_done_generic; + phy->ops.get_info = e1000_get_phy_info_igp; + phy->ops.read_reg = e1000_read_phy_reg_igp; + phy->ops.reset = e1000_phy_hw_reset_82541; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82541; + phy->ops.write_reg = e1000_write_phy_reg_igp; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82541; ret_val = e1000_get_phy_id(hw); if (ret_val) @@ -127,8 +127,8 @@ out: **/ static s32 e1000_init_nvm_params_82541(struct e1000_hw *hw) { - struct e1000_nvm_info *nvm = &hw->nvm; - s32 ret_val = E1000_SUCCESS; + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val = E1000_SUCCESS; u32 eecd = E1000_READ_REG(hw, E1000_EECD); u16 size; @@ -152,28 +152,25 @@ static s32 e1000_init_nvm_params_82541(s eecd &= ~E1000_EECD_SIZE; break; default: - nvm->type = eecd & E1000_EECD_TYPE - ? e1000_nvm_eeprom_spi - : e1000_nvm_eeprom_microwire; + nvm->type = eecd & E1000_EECD_TYPE ? e1000_nvm_eeprom_spi + : e1000_nvm_eeprom_microwire; break; } if (nvm->type == e1000_nvm_eeprom_spi) { - nvm->address_bits = (eecd & E1000_EECD_ADDR_BITS) - ? 16 : 8; - nvm->delay_usec = 1; - nvm->opcode_bits = 8; - nvm->page_size = (eecd & E1000_EECD_ADDR_BITS) - ? 32 : 8; + nvm->address_bits = (eecd & E1000_EECD_ADDR_BITS) ? 16 : 8; + nvm->delay_usec = 1; + nvm->opcode_bits = 8; + nvm->page_size = (eecd & E1000_EECD_ADDR_BITS) ? 32 : 8; /* Function Pointers */ - nvm->ops.acquire = e1000_acquire_nvm_generic; - nvm->ops.read = e1000_read_nvm_spi; - nvm->ops.release = e1000_release_nvm_generic; - nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.acquire = e1000_acquire_nvm_generic; + nvm->ops.read = e1000_read_nvm_spi; + nvm->ops.release = e1000_release_nvm_generic; + nvm->ops.update = e1000_update_nvm_checksum_generic; nvm->ops.valid_led_default = e1000_valid_led_default_generic; - nvm->ops.validate = e1000_validate_nvm_checksum_generic; - nvm->ops.write = e1000_write_nvm_spi; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.write = e1000_write_nvm_spi; /* * nvm->word_size must be discovered after the pointers @@ -196,21 +193,19 @@ static s32 e1000_init_nvm_params_82541(s nvm->word_size = 1 << size; } } else { - nvm->address_bits = (eecd & E1000_EECD_ADDR_BITS) - ? 8 : 6; - nvm->delay_usec = 50; - nvm->opcode_bits = 3; - nvm->word_size = (eecd & E1000_EECD_ADDR_BITS) - ? 256 : 64; + nvm->address_bits = (eecd & E1000_EECD_ADDR_BITS) ? 8 : 6; + nvm->delay_usec = 50; + nvm->opcode_bits = 3; + nvm->word_size = (eecd & E1000_EECD_ADDR_BITS) ? 256 : 64; /* Function Pointers */ - nvm->ops.acquire = e1000_acquire_nvm_generic; - nvm->ops.read = e1000_read_nvm_microwire; - nvm->ops.release = e1000_release_nvm_generic; - nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.acquire = e1000_acquire_nvm_generic; + nvm->ops.read = e1000_read_nvm_microwire; + nvm->ops.release = e1000_release_nvm_generic; + nvm->ops.update = e1000_update_nvm_checksum_generic; nvm->ops.valid_led_default = e1000_valid_led_default_generic; - nvm->ops.validate = e1000_validate_nvm_checksum_generic; - nvm->ops.write = e1000_write_nvm_microwire; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.write = e1000_write_nvm_microwire; } out: @@ -390,11 +385,10 @@ static s32 e1000_init_hw_82541(struct e1 DEBUGOUT("Error initializing identification LED\n"); /* This is not fatal and we should not stop init due to this */ } - + /* Storing the Speed Power Down value for later use */ - ret_val = hw->phy.ops.read_reg(hw, - IGP01E1000_GMII_FIFO, - &dev_spec->spd_default); + ret_val = hw->phy.ops.read_reg(hw, IGP01E1000_GMII_FIFO, + &dev_spec->spd_default); if (ret_val) goto out; @@ -423,7 +417,7 @@ static s32 e1000_init_hw_82541(struct e1 txdctl = E1000_READ_REG(hw, E1000_TXDCTL(0)); txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) | - E1000_TXDCTL_FULL_TX_DESC_WB; + E1000_TXDCTL_FULL_TX_DESC_WB; E1000_WRITE_REG(hw, E1000_TXDCTL(0), txdctl); /* @@ -447,7 +441,7 @@ out: * Retrieve the current speed and duplex configuration. **/ static s32 e1000_get_link_up_info_82541(struct e1000_hw *hw, u16 *speed, - u16 *duplex) + u16 *duplex) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; @@ -549,6 +543,7 @@ static s32 e1000_setup_copper_link_82541 ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + /* Earlier revs of the IGP phy require us to force MDI. */ if (hw->mac.type == e1000_82541 || hw->mac.type == e1000_82547) { dev_spec->dsp_config = e1000_dsp_config_disabled; @@ -651,9 +646,8 @@ static s32 e1000_check_for_link_82541(st * different link partner. */ ret_val = e1000_config_fc_after_link_up_generic(hw); - if (ret_val) { + if (ret_val) DEBUGOUT("Error configuring flow control\n"); - } out: return ret_val; @@ -671,7 +665,7 @@ out: * gigabit link is achieved to improve link quality. **/ static s32 e1000_config_dsp_after_link_change_82541(struct e1000_hw *hw, - bool link_up) + bool link_up) { struct e1000_phy_info *phy = &hw->phy; struct e1000_dev_spec_82541 *dev_spec = &hw->dev_spec._82541; @@ -679,11 +673,11 @@ static s32 e1000_config_dsp_after_link_c u32 idle_errs = 0; u16 phy_data, phy_saved_data, speed, duplex, i; u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20; - u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - {IGP01E1000_PHY_AGC_PARAM_A, - IGP01E1000_PHY_AGC_PARAM_B, - IGP01E1000_PHY_AGC_PARAM_C, - IGP01E1000_PHY_AGC_PARAM_D}; + u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = { + IGP01E1000_PHY_AGC_PARAM_A, + IGP01E1000_PHY_AGC_PARAM_B, + IGP01E1000_PHY_AGC_PARAM_C, + IGP01E1000_PHY_AGC_PARAM_D}; DEBUGFUNC("e1000_config_dsp_after_link_change_82541"); @@ -708,16 +702,16 @@ static s32 e1000_config_dsp_after_link_c for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { ret_val = phy->ops.read_reg(hw, - dsp_reg_array[i], - &phy_data); + dsp_reg_array[i], + &phy_data); if (ret_val) goto out; phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; ret_val = phy->ops.write_reg(hw, - dsp_reg_array[i], - phy_data); + dsp_reg_array[i], + phy_data); if (ret_val) goto out; } @@ -737,9 +731,8 @@ static s32 e1000_config_dsp_after_link_c for (i = 0; i < ffe_idle_err_timeout; i++) { usec_delay(1000); - ret_val = phy->ops.read_reg(hw, - PHY_1000T_STATUS, - &phy_data); + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, + &phy_data); if (ret_val) goto out; @@ -748,8 +741,8 @@ static s32 e1000_config_dsp_after_link_c dev_spec->ffe_config = e1000_ffe_config_active; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_DSP_FFE, - IGP01E1000_PHY_DSP_FFE_CM_CP); + IGP01E1000_PHY_DSP_FFE, + IGP01E1000_PHY_DSP_FFE_CM_CP); if (ret_val) goto out; break; @@ -757,7 +750,7 @@ static s32 e1000_config_dsp_after_link_c if (idle_errs) ffe_idle_err_timeout = - FFE_IDLE_ERR_COUNT_TIMEOUT_100; + FFE_IDLE_ERR_COUNT_TIMEOUT_100; } } else { if (dev_spec->dsp_config == e1000_dsp_config_activated) { @@ -765,9 +758,8 @@ static s32 e1000_config_dsp_after_link_c * Save off the current value of register 0x2F5B * to be restored at the end of the routines. */ - ret_val = phy->ops.read_reg(hw, - 0x2F5B, - &phy_saved_data); + ret_val = phy->ops.read_reg(hw, 0x2F5B, + &phy_saved_data); if (ret_val) goto out; @@ -778,15 +770,14 @@ static s32 e1000_config_dsp_after_link_c msec_delay_irq(20); - ret_val = phy->ops.write_reg(hw, - 0x0000, - IGP01E1000_IEEE_FORCE_GIG); + ret_val = phy->ops.write_reg(hw, 0x0000, + IGP01E1000_IEEE_FORCE_GIG); if (ret_val) goto out; for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { ret_val = phy->ops.read_reg(hw, - dsp_reg_array[i], - &phy_data); + dsp_reg_array[i], + &phy_data); if (ret_val) goto out; @@ -794,24 +785,22 @@ static s32 e1000_config_dsp_after_link_c phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS; ret_val = phy->ops.write_reg(hw, - dsp_reg_array[i], - phy_data); + dsp_reg_array[i], + phy_data); if (ret_val) goto out; } - ret_val = phy->ops.write_reg(hw, - 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + ret_val = phy->ops.write_reg(hw, 0x0000, + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) goto out; msec_delay_irq(20); /* Now enable the transmitter */ - ret_val = phy->ops.write_reg(hw, - 0x2F5B, - phy_saved_data); + ret_val = phy->ops.write_reg(hw, 0x2F5B, + phy_saved_data); if (ret_val) goto out; @@ -838,21 +827,18 @@ static s32 e1000_config_dsp_after_link_c msec_delay_irq(20); - ret_val = phy->ops.write_reg(hw, - 0x0000, - IGP01E1000_IEEE_FORCE_GIG); + ret_val = phy->ops.write_reg(hw, 0x0000, + IGP01E1000_IEEE_FORCE_GIG); if (ret_val) goto out; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_DSP_FFE, - IGP01E1000_PHY_DSP_FFE_DEFAULT); + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_DSP_FFE, + IGP01E1000_PHY_DSP_FFE_DEFAULT); if (ret_val) goto out; - ret_val = phy->ops.write_reg(hw, - 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + ret_val = phy->ops.write_reg(hw, 0x0000, + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) goto out; @@ -889,11 +875,10 @@ static s32 e1000_get_cable_length_igp_82 u16 i, data; u16 cur_agc_value, agc_value = 0; u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; - u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - {IGP01E1000_PHY_AGC_A, - IGP01E1000_PHY_AGC_B, - IGP01E1000_PHY_AGC_C, - IGP01E1000_PHY_AGC_D}; + u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {IGP01E1000_PHY_AGC_A, + IGP01E1000_PHY_AGC_B, + IGP01E1000_PHY_AGC_C, + IGP01E1000_PHY_AGC_D}; DEBUGFUNC("e1000_get_cable_length_igp_82541"); @@ -929,12 +914,12 @@ static s32 e1000_get_cable_length_igp_82 } phy->min_cable_length = (e1000_igp_cable_length_table[agc_value] > - IGP01E1000_AGC_RANGE) - ? (e1000_igp_cable_length_table[agc_value] - - IGP01E1000_AGC_RANGE) - : 0; + IGP01E1000_AGC_RANGE) + ? (e1000_igp_cable_length_table[agc_value] - + IGP01E1000_AGC_RANGE) + : 0; phy->max_cable_length = e1000_igp_cable_length_table[agc_value] + - IGP01E1000_AGC_RANGE; + IGP01E1000_AGC_RANGE; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; @@ -992,50 +977,48 @@ static s32 e1000_set_d3_lplu_state_82541 */ if (phy->smart_speed == e1000_smart_speed_on) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) goto out; data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) goto out; } else if (phy->smart_speed == e1000_smart_speed_off) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) goto out; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) goto out; } } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { data |= IGP01E1000_GMII_FLEX_SPD; ret_val = phy->ops.write_reg(hw, IGP01E1000_GMII_FIFO, data); if (ret_val) goto out; /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) goto out; data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); } out: @@ -1056,16 +1039,14 @@ static s32 e1000_setup_led_82541(struct DEBUGFUNC("e1000_setup_led_82541"); - ret_val = hw->phy.ops.read_reg(hw, - IGP01E1000_GMII_FIFO, - &dev_spec->spd_default); + ret_val = hw->phy.ops.read_reg(hw, IGP01E1000_GMII_FIFO, + &dev_spec->spd_default); if (ret_val) goto out; - ret_val = hw->phy.ops.write_reg(hw, - IGP01E1000_GMII_FIFO, - (u16)(dev_spec->spd_default & - ~IGP01E1000_GMII_SPD)); + ret_val = hw->phy.ops.write_reg(hw, IGP01E1000_GMII_FIFO, + (u16)(dev_spec->spd_default & + ~IGP01E1000_GMII_SPD)); if (ret_val) goto out; @@ -1089,9 +1070,8 @@ static s32 e1000_cleanup_led_82541(struc DEBUGFUNC("e1000_cleanup_led_82541"); - ret_val = hw->phy.ops.write_reg(hw, - IGP01E1000_GMII_FIFO, - dev_spec->spd_default); + ret_val = hw->phy.ops.write_reg(hw, IGP01E1000_GMII_FIFO, + dev_spec->spd_default); if (ret_val) goto out; @@ -1178,14 +1158,12 @@ static s32 e1000_phy_init_script_82541(s u16 fused, fine, coarse; /* Move to analog registers page */ - hw->phy.ops.read_reg(hw, - IGP01E1000_ANALOG_SPARE_FUSE_STATUS, - &fused); + hw->phy.ops.read_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, + &fused); if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) { - hw->phy.ops.read_reg(hw, - IGP01E1000_ANALOG_FUSE_STATUS, - &fused); + hw->phy.ops.read_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, + &fused); fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK; coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK; @@ -1194,19 +1172,19 @@ static s32 e1000_phy_init_script_82541(s coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10; fine -= IGP01E1000_ANALOG_FUSE_FINE_1; } else if (coarse == - IGP01E1000_ANALOG_FUSE_COARSE_THRESH) + IGP01E1000_ANALOG_FUSE_COARSE_THRESH) fine -= IGP01E1000_ANALOG_FUSE_FINE_10; fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) | - (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) | - (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK); + (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) | + (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK); hw->phy.ops.write_reg(hw, - IGP01E1000_ANALOG_FUSE_CONTROL, - fused); + IGP01E1000_ANALOG_FUSE_CONTROL, + fused); hw->phy.ops.write_reg(hw, - IGP01E1000_ANALOG_FUSE_BYPASS, - IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL); + IGP01E1000_ANALOG_FUSE_BYPASS, + IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL); } } Modified: stable/10/sys/dev/e1000/e1000_82541.h ============================================================================== --- stable/10/sys/dev/e1000/e1000_82541.h Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/sys/dev/e1000/e1000_82541.h Wed Jan 27 22:31:08 2016 (r294958) @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2008, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without @@ -37,55 +37,55 @@ #define NVM_WORD_SIZE_BASE_SHIFT_82541 (NVM_WORD_SIZE_BASE_SHIFT + 1) -#define IGP01E1000_PHY_CHANNEL_NUM 4 +#define IGP01E1000_PHY_CHANNEL_NUM 4 -#define IGP01E1000_PHY_AGC_A 0x1172 -#define IGP01E1000_PHY_AGC_B 0x1272 -#define IGP01E1000_PHY_AGC_C 0x1472 -#define IGP01E1000_PHY_AGC_D 0x1872 - -#define IGP01E1000_PHY_AGC_PARAM_A 0x1171 -#define IGP01E1000_PHY_AGC_PARAM_B 0x1271 -#define IGP01E1000_PHY_AGC_PARAM_C 0x1471 -#define IGP01E1000_PHY_AGC_PARAM_D 0x1871 - -#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000 -#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000 - -#define IGP01E1000_PHY_DSP_RESET 0x1F33 - -#define IGP01E1000_PHY_DSP_FFE 0x1F35 -#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069 -#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A - -#define IGP01E1000_IEEE_FORCE_GIG 0x0140 -#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300 - -#define IGP01E1000_AGC_LENGTH_SHIFT 7 -#define IGP01E1000_AGC_RANGE 10 - -#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20 -#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 - -#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0 -#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1 -#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC -#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE - -#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100 -#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80 -#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070 -#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040 -#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010 -#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080 -#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500 -#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000 +#define IGP01E1000_PHY_AGC_A 0x1172 +#define IGP01E1000_PHY_AGC_B 0x1272 +#define IGP01E1000_PHY_AGC_C 0x1472 +#define IGP01E1000_PHY_AGC_D 0x1872 + +#define IGP01E1000_PHY_AGC_PARAM_A 0x1171 +#define IGP01E1000_PHY_AGC_PARAM_B 0x1271 +#define IGP01E1000_PHY_AGC_PARAM_C 0x1471 +#define IGP01E1000_PHY_AGC_PARAM_D 0x1871 + +#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000 +#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000 + +#define IGP01E1000_PHY_DSP_RESET 0x1F33 + +#define IGP01E1000_PHY_DSP_FFE 0x1F35 +#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069 +#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A + +#define IGP01E1000_IEEE_FORCE_GIG 0x0140 +#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300 + +#define IGP01E1000_AGC_LENGTH_SHIFT 7 +#define IGP01E1000_AGC_RANGE 10 + +#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20 +#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 + +#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0 +#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1 +#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC +#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE + +#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100 +#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80 +#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070 +#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040 +#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010 +#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080 +#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500 +#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000 #define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002 -#define IGP01E1000_MSE_CHANNEL_D 0x000F -#define IGP01E1000_MSE_CHANNEL_C 0x00F0 -#define IGP01E1000_MSE_CHANNEL_B 0x0F00 -#define IGP01E1000_MSE_CHANNEL_A 0xF000 +#define IGP01E1000_MSE_CHANNEL_D 0x000F +#define IGP01E1000_MSE_CHANNEL_C 0x00F0 +#define IGP01E1000_MSE_CHANNEL_B 0x0F00 +#define IGP01E1000_MSE_CHANNEL_A 0xF000 void e1000_init_script_state_82541(struct e1000_hw *hw, bool state); Modified: stable/10/sys/dev/e1000/e1000_82542.c ============================================================================== --- stable/10/sys/dev/e1000/e1000_82542.c Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/sys/dev/e1000/e1000_82542.c Wed Jan 27 22:31:08 2016 (r294958) @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2014, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without @@ -62,7 +62,7 @@ static s32 e1000_init_phy_params_82542(s DEBUGFUNC("e1000_init_phy_params_82542"); - phy->type = e1000_phy_none; + phy->type = e1000_phy_none; return ret_val; } @@ -77,18 +77,18 @@ static s32 e1000_init_nvm_params_82542(s DEBUGFUNC("e1000_init_nvm_params_82542"); - nvm->address_bits = 6; - nvm->delay_usec = 50; - nvm->opcode_bits = 3; - nvm->type = e1000_nvm_eeprom_microwire; - nvm->word_size = 64; + nvm->address_bits = 6; + nvm->delay_usec = 50; + nvm->opcode_bits = 3; + nvm->type = e1000_nvm_eeprom_microwire; + nvm->word_size = 64; /* Function Pointers */ - nvm->ops.read = e1000_read_nvm_microwire; - nvm->ops.release = e1000_stop_nvm; - nvm->ops.write = e1000_write_nvm_microwire; - nvm->ops.update = e1000_update_nvm_checksum_generic; - nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.read = e1000_read_nvm_microwire; + nvm->ops.release = e1000_stop_nvm; + nvm->ops.write = e1000_write_nvm_microwire; + nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; return E1000_SUCCESS; } @@ -124,7 +124,8 @@ static s32 e1000_init_mac_params_82542(s /* link setup */ mac->ops.setup_link = e1000_setup_link_82542; /* phy/fiber/serdes setup */ - mac->ops.setup_physical_interface = e1000_setup_fiber_serdes_link_generic; + mac->ops.setup_physical_interface = + e1000_setup_fiber_serdes_link_generic; /* check for link */ mac->ops.check_for_link = e1000_check_for_fiber_link_generic; /* multicast address update */ @@ -143,7 +144,8 @@ static s32 e1000_init_mac_params_82542(s /* clear hardware counters */ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82542; /* link info */ - mac->ops.get_link_up_info = e1000_get_speed_and_duplex_fiber_serdes_generic; + mac->ops.get_link_up_info = + e1000_get_speed_and_duplex_fiber_serdes_generic; return E1000_SUCCESS; } @@ -325,7 +327,7 @@ static s32 e1000_setup_link_82542(struct hw->fc.requested_mode &= ~e1000_fc_tx_pause; - if (mac->report_tx_early == 1) + if (mac->report_tx_early) hw->fc.requested_mode &= ~e1000_fc_rx_pause; /* @@ -335,7 +337,7 @@ static s32 e1000_setup_link_82542(struct hw->fc.current_mode = hw->fc.requested_mode; DEBUGOUT1("After fix-ups FlowControl is now = %x\n", - hw->fc.current_mode); + hw->fc.current_mode); /* Call the necessary subroutine to configure the link. */ ret_val = mac->ops.setup_physical_interface(hw); @@ -419,9 +421,8 @@ static int e1000_rar_set_82542(struct e1 * HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian */ - rar_low = ((u32) addr[0] | - ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); @@ -431,6 +432,7 @@ static int e1000_rar_set_82542(struct e1 E1000_WRITE_REG_ARRAY(hw, E1000_RA, (index << 1), rar_low); E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((index << 1) + 1), rar_high); + return E1000_SUCCESS; } Modified: stable/10/sys/dev/e1000/e1000_82543.c ============================================================================== --- stable/10/sys/dev/e1000/e1000_82543.c Wed Jan 27 21:37:43 2016 (r294957) +++ stable/10/sys/dev/e1000/e1000_82543.c Wed Jan 27 22:31:08 2016 (r294958) @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2011, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without @@ -47,9 +47,9 @@ static s32 e1000_init_phy_params_82543( static s32 e1000_init_nvm_params_82543(struct e1000_hw *hw); static s32 e1000_init_mac_params_82543(struct e1000_hw *hw); static s32 e1000_read_phy_reg_82543(struct e1000_hw *hw, u32 offset, - u16 *data); + u16 *data); static s32 e1000_write_phy_reg_82543(struct e1000_hw *hw, u32 offset, - u16 data); + u16 data); static s32 e1000_phy_force_speed_duplex_82543(struct e1000_hw *hw); static s32 e1000_phy_hw_reset_82543(struct e1000_hw *hw); static s32 e1000_reset_hw_82543(struct e1000_hw *hw); @@ -62,7 +62,7 @@ static s32 e1000_check_for_fiber_link_8 static s32 e1000_led_on_82543(struct e1000_hw *hw); static s32 e1000_led_off_82543(struct e1000_hw *hw); static void e1000_write_vfta_82543(struct e1000_hw *hw, u32 offset, - u32 value); + u32 value); static void e1000_clear_hw_cntrs_82543(struct e1000_hw *hw); static s32 e1000_config_mac_to_phy_82543(struct e1000_hw *hw); static bool e1000_init_phy_disabled_82543(struct e1000_hw *hw); @@ -71,7 +71,7 @@ static s32 e1000_polarity_reversal_work static void e1000_raise_mdi_clk_82543(struct e1000_hw *hw, u32 *ctrl); static u16 e1000_shift_in_mdi_bits_82543(struct e1000_hw *hw); static void e1000_shift_out_mdi_bits_82543(struct e1000_hw *hw, u32 data, - u16 count); + u16 count); static bool e1000_tbi_compatibility_enabled_82543(struct e1000_hw *hw); static void e1000_set_tbi_sbp_82543(struct e1000_hw *hw, bool state); static s32 e1000_read_mac_addr_82543(struct e1000_hw *hw); @@ -89,34 +89,34 @@ static s32 e1000_init_phy_params_82543(s DEBUGFUNC("e1000_init_phy_params_82543"); if (hw->phy.media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; + phy->type = e1000_phy_none; goto out; } else { - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper; } - phy->addr = 1; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 10000; - phy->type = e1000_phy_m88; + phy->addr = 1; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 10000; + phy->type = e1000_phy_m88; /* Function Pointers */ - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.commit = e1000_phy_sw_reset_generic; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82543; - phy->ops.get_cable_length = e1000_get_cable_length_m88; - phy->ops.get_cfg_done = e1000_get_cfg_done_generic; - phy->ops.read_reg = (hw->mac.type == e1000_82543) - ? e1000_read_phy_reg_82543 - : e1000_read_phy_reg_m88; - phy->ops.reset = (hw->mac.type == e1000_82543) - ? e1000_phy_hw_reset_82543 - : e1000_phy_hw_reset_generic; - phy->ops.write_reg = (hw->mac.type == e1000_82543) - ? e1000_write_phy_reg_82543 - : e1000_write_phy_reg_m88; - phy->ops.get_info = e1000_get_phy_info_m88; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.commit = e1000_phy_sw_reset_generic; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82543; + phy->ops.get_cable_length = e1000_get_cable_length_m88; + phy->ops.get_cfg_done = e1000_get_cfg_done_generic; + phy->ops.read_reg = (hw->mac.type == e1000_82543) + ? e1000_read_phy_reg_82543 + : e1000_read_phy_reg_m88; + phy->ops.reset = (hw->mac.type == e1000_82543) + ? e1000_phy_hw_reset_82543 + : e1000_phy_hw_reset_generic; + phy->ops.write_reg = (hw->mac.type == e1000_82543) + ? e1000_write_phy_reg_82543 + : e1000_write_phy_reg_m88; + phy->ops.get_info = e1000_get_phy_info_m88; /* * The external PHY of the 82543 can be in a funky state. @@ -170,18 +170,18 @@ static s32 e1000_init_nvm_params_82543(s DEBUGFUNC("e1000_init_nvm_params_82543"); - nvm->type = e1000_nvm_eeprom_microwire; - nvm->word_size = 64; - nvm->delay_usec = 50; - nvm->address_bits = 6; - nvm->opcode_bits = 3; + nvm->type = e1000_nvm_eeprom_microwire; + nvm->word_size = 64; + nvm->delay_usec = 50; + nvm->address_bits = 6; + nvm->opcode_bits = 3; /* Function Pointers */ - nvm->ops.read = e1000_read_nvm_microwire; - nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.read = e1000_read_nvm_microwire; + nvm->ops.update = e1000_update_nvm_checksum_generic; nvm->ops.valid_led_default = e1000_valid_led_default_generic; - nvm->ops.validate = e1000_validate_nvm_checksum_generic; - nvm->ops.write = e1000_write_nvm_microwire; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.write = e1000_write_nvm_microwire; return E1000_SUCCESS; } @@ -226,19 +226,18 @@ static s32 e1000_init_mac_params_82543(s mac->ops.setup_link = e1000_setup_link_82543; /* physical interface setup */ mac->ops.setup_physical_interface = - (hw->phy.media_type == e1000_media_type_copper) - ? e1000_setup_copper_link_82543 - : e1000_setup_fiber_link_82543; + (hw->phy.media_type == e1000_media_type_copper) + ? e1000_setup_copper_link_82543 : e1000_setup_fiber_link_82543; /* check for link */ *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***