Date: Thu, 9 Nov 2000 20:20:42 +0000 (GMT) From: Nick Hibma <n_hibma@qubesoft.com> To: James FitzGibbon <james@targetnet.com> Cc: hackers@FreeBSD.ORG, scsi@FreeBSD.ORG Subject: Re: USB-to-SCSI converter Message-ID: <Pine.BSF.4.20.0011092019410.40294-100000@henny.webweaving.org> In-Reply-To: <20001109150646.B39548@targetnet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hm, I missed the zip story. You seem to have all the bits that are
necessary in your kernel.
Could you compile your kernel/module with UMASS_DEBUG defined and send
me the output after an attach?
The 'GetMAXLUN not supported' thing does not make the driver fail, it
makes it just assume that the LUN is always 0.
Nick
On Thu, 9 Nov 2000, James FitzGibbon wrote:
> * Nick Hibma (n_hibma@qubesoft.com) [001109 14:52]:
>
> >
> > This is not a problem as the thing works although it displays the
> > message. Because it does not support the call it gives an indication
> > that multi LUN devices are not supported.
> >
> > I have one of these cables and managed to newfs a 4Gb SCSI drive.
> >
> > Was anything connected to the cable when you connected it?
>
> Yes, I've tried with a Yahama external CDR and a Syquest Syjet drive. In
> neither case did the device show up on the probe. I do have "SCSI over USB"
> working on the box, since I regularly use a USB zip drive on the same
> machine and it comes up as device da0 right after the 'umass-sim0' probe.
>
> Can you share your kernel config and/or dmesg for that 4gb drive you mention
> ?
>
> Thanks.
>
> --
> j.
>
> James FitzGibbon james@targetnet.com
> Targetnet.com Inc. Voice/Fax +1 416 306-0466/0452
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-hackers" in the body of the message
>
--
Qube Software, Ltd. Private:
n_hibma@qubesoft.com n_hibma@webweaving.org
n_hibma@freebsd.org
http://www.qubesoft.com/ http://www.etla.net/~n_hibma/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.20.0011092019410.40294-100000>