Date: Wed, 6 Mar 1996 09:23:54 -0700 From: Nate Williams <nate@sri.MT.net> To: baba@ats.sjk.kdd.co.jp (Koji Baba) Cc: questions@FreeBSD.org Subject: Re: Installation by 3Com PCMCIA adapter Message-ID: <199603061623.JAA27381@rocky.sri.MT.net> In-Reply-To: <v02130500ad63ab41e2aa@[133.128.68.143]> References: <v02130500ad63ab41e2aa@[133.128.68.143]>
next in thread | previous in thread | raw e-mail | index | archive | help
> I have a problem with installation of 2.1.0-RELEASE > by 3Com PCMCIA adapter. Is this a 3C589B or a 3C589C? > ---- > ze: pcmcia slot 0: 3Com Corporation~3C589~TP/BNC LAN Card Ver. 2a~000002~ > ze: slot 1: no card in slot > ze0 not found at 0x300 > zp: found card in slot 0 > zp0 not found at 0x300 > ---- > And after bootup, I can not use ether card at installation by ftp or NFS. > It seems that the installer can not find the card as valid device. > > Setting of the PCMCIA card is completely default value. > Port = 0x300 > IRQ = 10 > Memory Base = 0xd8000 type a '-c' at the boot prompt and make sure the zp0 device is configured with the same defaults. If it's a 3C589C, then you'll need an updated boot disk to work. If that's the case, there is one that will allow you to install everything on: http://www.mt.cs.keio.ac.jp/person/hosokawa/freebsd-pcmcia/ Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199603061623.JAA27381>