From owner-freebsd-scsi Mon Dec 11 10:48:58 2000 From owner-freebsd-scsi@FreeBSD.ORG Mon Dec 11 10:48:55 2000 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 807F637B400 for ; Mon, 11 Dec 2000 10:48:54 -0800 (PST) Received: from zeppo.feral.com (IDENT:mjacob@zeppo [192.67.166.71]) by feral.com (8.9.3/8.9.3) with ESMTP id KAA12530; Mon, 11 Dec 2000 10:48:48 -0800 Date: Mon, 11 Dec 2000 10:48:41 -0800 (PST) From: Matthew Jacob Reply-To: mjacob@feral.com To: David Miller Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: LUN 1 on 3.2-R? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The pass2 devices is SES (try 4.X or later for this). The pass1 device is also reporting itself as a PROCESSOR type device- not a direct access. Again, try 4.X. 3.2 is pretty damned old. > Hi All:) > > I'm stumped. I have a 3.2R system with an attached external SCSI-SCSI > RAID controller. I had a nice 10 drive array last year with 36 GB drives, > and this year I'm adding on another nice array. > > I have this in my config file: > > # SCSI peripherals > # Only one of each of these is needed, they are dynamically allocated. > controller scbus0 # SCSI bus (required) > # device da0 # Direct Access (disks) > disk da0 at scbus0 target 2 unit 0 > disk da1 at scbus0 target 2 unit 1 > device sa0 # Sequential Access (tape etc) > device cd0 # CD > device pass0 # Passthrough device (direct SCSI) > > > But in dmesg I get: > > Waiting 5 seconds for SCSI devices to settle > pass1 at ahc0 bus 0 target 2 lun 1 > pass1: Fixed Processor SCSI-2 device > pass1: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged > Queueing Enabled > pass2 at ahc0 bus 0 target 2 lun 2 > pass2: Fixed Processor SCSI-2 device > pass2: 80.000MB/s transfers (40.000MHz, offset 127, 16bit) > da0 at ahc0 bus 0 target 2 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing > Enabled > da0: 279097MB (571591680 512 byte sectors: 255H 63S/T 35579C) > changing root device to wd0s1a > > > camcontrol devlist: > > su-2.03# camcontrol devlist > at scbus0 target 2 lun 0 (pass0,da0) > at scbus0 target 2 lun 1 (pass1) > at scbus0 target 2 lun 2 (pass2) > > > The associated da* and pass* devices seem to exist. > > What am I missing? > > Thanks in advance, > > --- David > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message