Date: Mon, 3 Nov 2003 17:04:12 +0100 From: "Tomas Nyman" <tjyv@reaktorn.org> To: <freebsd-questions@FreeBSD.ORG> Subject: UDMA ICRC Error Message-ID: <000501c3a224$200ed070$0100a8c0@elite>
next in thread | raw e-mail | index | archive | help
Hi! I have a serious problem with 3 of my harddrives, the fail to enter DMA = mode on boot, I can force them into udma5 using atacontrol but after a = few reads I will get the same error and they will fall back into PIO4 = mode. The 3 disks are in a Vinum array consisting of 6 drives, the other 3 are = working fine. I have tried 2 different ata controller cards in 2 different PCI slots = and 3 different ide cables, I still get the same error. I have ran fsck 4 times on the array and the output is always looking = good, no errors found: ** /dev/vinum/MyVol ** Last Mounted on /projects ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 39454 files, 546808950 used, 78086290 free (3682 frags, 9760326 blocks, = 0.0% fragmentation) Sometimes when I try to boot I get this error: Fatal trap 12: page fault while in kernel mode fault code =3D supervisor read, page not present I have not been able to catch the complete error message on a file since = the machine is far from home and I just had my friend reboot the machine = when I got that error, but it made me think it might have something to = do with this: = http://lists.freebsd.org/pipermail/freebsd-current/2003-July/007155.html I know that is a 5.1 error and I=B4m running 4.9 but could applying the = patch that is posted a few messages later help me? I don=B4t know what to do really, I am OK with doing NEWFS on the array = if it would fix the disks, but since fsck shows no error I think it=B4s = something else, I appreciate any help. Tomas DMESG: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 4.9-RELEASE #1: Thu Oct 30 19:09:30 CET 2003 root@Tanhauser:/usr/obj/usr/src/sys/SOPP Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 701593772 Hz CPU: Intel Pentium III (701.59-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 = Features=3D0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory =3D 671088640 (655360K bytes) avail memory =3D 648806400 (633600K bytes) Preloaded elf kernel "kernel" at 0xc032f000. ccd0-8: Concatenated disk drivers Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fde70 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem = 0xd0000000-0xd3ffffff at device 0.0 on pci0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on = pci0 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 10 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 = on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 7 chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at = device 7.3 on pci0 atapci1: <Promise TX2 ATA100 controller> port = 0xa400-0xa40f,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 = mem 0xdb000000-0xdb003fff irq 7 at device 11.0 on pci0 ata2: at 0x9400 on atapci1 ata3: at 0x9c00 on atapci1 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem = 0xdb00c000-0xdb00c07f irq 11 at device 13.0 on pci0 xl0: Ethernet address: 00:04:76:1b:ea:73 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci2: <Promise TX2 ATA100 controller> port = 0xbc00-0xbc0f,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac07 = mem 0xdb004000-0xdb007fff irq 5 at device 15.0 on pci0 ata4: at 0xac00 on atapci2 ata5: at 0xb400 on atapci2 atapci3: <Promise TX2 ATA100 controller> port = 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 = mem 0xdb008000-0xdb00bfff irq 10 at device 17.0 on pci0 ata6: at 0xc000 on atapci3 ata7: at 0xc800 on atapci3 atapci4: <HighPoint HPT366 ATA66 controller> port = 0xdc00-0xdcff,0xd800-0xd803,0xd400-0xd407 irq 11 at device 19.0 on pci0 ata8: at 0xd400 on atapci4 atapci5: <HighPoint HPT366 ATA66 controller> port = 0xe800-0xe8ff,0xe400-0xe403,0xe000-0xe007 irq 11 at device 19.1 on pci0 ata9: at 0xe000 on atapci5 orm0: <Option ROMs> at iomem = 0xc0000-0xc7fff,0xc8000-0xca7ff,0xcb000-0xcb7ff,0xcc000-0xcd7ff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> ipfw2 initialized, divert enabled, rule-based forwarding enabled, = default to accept, logging limited to 100 packets/entry by default ad0: 9671MB <WDC AC310100B> [19650/16/63] at ata0-master UDMA33 ad6: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata3-master UDMA100 ad7: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata3-slave UDMA100 ad12: 114473MB <WDC WD1200JB-00DUA0> [232581/16/63] at ata6-master = UDMA100 ad14: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad14 bn 234441585; = cn 232580 tn 15 sn 0) retrying ad14: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad14 bn 234441585; = cn 232580 tn 15 sn 0) retrying ad14: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad14 bn 234441585; = cn 232580 tn 15 sn 0) retrying ad14: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad14 bn 234441585; = cn 232580 tn 15 sn 0) falling back to PIO mode ad14: 114473MB <WDC WD1200JB-00DUA0> [232581/16/63] at ata7-master PIO4 ad15: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad15 bn 234441585; = cn 232580 tn 15 sn 0) retrying ad15: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad15 bn 234441585; = cn 232580 tn 15 sn 0) retrying ad15: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad15 bn 234441585; = cn 232580 tn 15 sn 0) retrying ad15: UDMA ICRC error reading fsbn 234441585 of 0-3 (ad15 bn 234441585; = cn 232580 tn 15 sn 0) falling back to PIO mode ad15: 114473MB <WDC WD1200JB-00DUA0> [232581/16/63] at ata7-slave PIO4 ad16: 95396MB <WDC WD1000BB-60CCB0> [193821/16/63] at ata8-master UDMA66 ad17: 95396MB <WDC WD1000BB-32CCB0> [193821/16/63] at ata8-slave UDMA66 ad18: 95396MB <WDC WD1000BB-60CCB0> [193821/16/63] at ata9-master UDMA66 Mounting root from ufs:/dev/ad0s1a ad12: UDMA ICRC error reading fsbn 0 (ad12 bn 0; cn 0 tn 0 sn 0) = retrying ad12: UDMA ICRC error reading fsbn 0 (ad12 bn 0; cn 0 tn 0 sn 0) = retrying ad12: UDMA ICRC error reading fsbn 0 (ad12 bn 0; cn 0 tn 0 sn 0) = retrying ad12: UDMA ICRC error reading fsbn 0 (ad12 bn 0; cn 0 tn 0 sn 0) falling = back to PIO mode
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000501c3a224$200ed070$0100a8c0>