Date: Mon, 18 Nov 2002 00:37:48 -0500 From: "Vadim Stanovov" <gadothaah@programmer.net> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/45383: Failed installation FreeBSD 4.7-RELEASE and 4.7-STABLE with disks attached to Mylex AcceleRAID 170 Message-ID: <20021118053748.18278.qmail@mail.com>
next in thread | raw e-mail | index | archive | help
>Number: 45383
>Category: i386
>Synopsis: Failed installation FreeBSD 4.7-RELEASE and 4.7-STABLE with disks attached to Mylex AcceleRAID 170
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Nov 17 21:40:00 PST 2002
>Closed-Date:
>Last-Modified:
>Originator: Vadim Stanovov
>Release: FreeBSD 4.7-STABLE i386
>Organization:
>Environment:
System: FreeBSD bsdnew.xxxxx.ru 4.7-STABLE FreeBSD 4.7-STABLE #0: Sun Nov 17 18:5:50 GMT 2002 user@gogogo.xxxxx.ru:/usr/obj/usr/src/sys/GENERIC i386
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Sun Nov 17 18:25:50 GMT 2002
root@gogogo.xxxxx.ru:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1893.87-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 1073479680 (1048320K bytes)
avail memory = 1039671296 (1015304K bytes)
Preloaded elf kernel "kernel" at 0xc0514000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00f2cd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfeae7000-0xfeae7fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:03:47:d3:5c:34
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xde80-0xdebf mem 0xfe900000-0xfe9fffff,0xfeae6000-0xfeae6fff irq 9 at device 9.0 on pci2
fxp1: Ethernet address 00:02:b3:24:6d:32
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mly0: <Mylex AcceleRAID 170> mem 0xe8000000-0xebffffff irq 10 at device 10.0 on pci2
mly0: AcceleRAID 170 , 1 channel, firmware 7.01-0-00 (20020418), 64MB RAM
pci2: <S3 Trio graphics accelerator> at 11.0 irq 11
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 9 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 15
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Intel product 0x1122, class 9/0, rev 1.10/0.00, addr 2
device_probe_and_attach: uhub2 attach returned 6
uhub2: Intel product 0x1122, class 9/0, rev 1.10/0.00, addr 2
device_probe_and_attach: uhub2 attach returned 6
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 15
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <LG CD-ROM CRD-8521B> at ata0-master PIO4
Mounting root from ufs:/dev/da0s1a
da0 at mly0 bus 1 target 0 lun 0
da0: <RAID 7 online > Fixed Direct Access SCSI-3 device
da0: 135.168MB/s transfers
da0: 34986MB (71651328 512 byte sectors: 255H 63S/T 4460C)
pciconf -l -v :
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge'
class = bridge
subclass = PCI-PCI
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x05 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB (ICH2/3/4) Hub Interface to PCI Bridge (244E)'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24408086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA (ICH2) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x010180 card=0x50548086 chip=0x244b8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA (ICH2) UltraATA/100 IDE Controller'
class = mass storage
subclass = ATA
uhci0@pci0:31:2: class=0x0c0300 card=0x50548086 chip=0x24428086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller'
class = serial bus
subclass = USB
none0@pci0:31:3: class=0x0c0500 card=0x50548086 chip=0x24438086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM (ICH2/ICH2-M) SMBus Controller'
class = serial bus
subclass = SMBus
uhci1@pci0:31:4: class=0x0c0300 card=0x50548086 chip=0x24448086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller'
class = serial bus
subclass = USB
none1@pci0:31:5: class=0x040100 card=0x70748086 chip=0x24458086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM (ICH2/ICH2-M) AC'97 Audio Controller'
class = multimedia
subclass = audio
fxp0@pci2:8:0: class=0x020000 card=0x30138086 chip=0x24498086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/CAM (ICH2/3) LAN Controller'
class = network
subclass = ethernet
fxp1@pci2:9:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
mly0@pci2:10:0: class=0x010400 card=0x00521069 chip=0x00501069 rev=0x02 hdr=0x00
vendor = 'IBM Corporation'
device = 'AcceleRAID Disk Array'
class = mass storage
subclass = RAID
none2@pci2:11:0: class=0x030000 card=0x00000000 chip=0x88115333 rev=0x54 hdr=0x00
vendor = 'S3 Incorporated'
device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
class = display
subclass = VGA
>Description:
While installation booting whith 4.7-STABLE (or 4.7-RELEASE)
Mylex AcceleRAID 170 does not detect but second debug screen shows:
DEBUG: Loading module mly.ko (Mylex AcceleRAID/eXtremeRAID)
mly0: <Mylex AcceleRAID 170> mem 0xe8000000-0xebffffff irq 10 at device 10.0 on pci2
mly0: Mylex AcceleRAID 170 , 1 channel, firmware 7.01-0-00 (20020418), 64MB RAM
When go to installation menu "Custom - Allocate disk space for FreeBSD"
shows message:
-------------
No disks found!
Please verify that your disk controller is being properly probed at boot time.
-------------
However installation on this PC 4.6.2-RELEASE or 5.0-CURRENT go just fine.
I have tried use another PC and another Mylex (different BIOS, etc.)
in different combinations - problem persist.
It is workaround for this problem - boot from floppies 4.6.2-RELEASE
and install from CD with 4.7, but it's not guaranteed to work either.
>How-To-Repeat:
Boot from floppies 4.7-RELEASE on PC with disks attached
to Mylex AcceleRAID 170.
>Fix:
--
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021118053748.18278.qmail>