Date: Fri, 4 Jun 2004 15:03:09 -0700 (PDT) From: Paulo Roberto <nirv199@yahoo.com> To: freebsd-x11@freebsd.org Subject: i810 and 1024x768 Message-ID: <20040604220309.74031.qmail@web14926.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hello all, I did all I could. I spent the last three weeks (since I bought my laptop) trying to configure X so it would work in 1024x768. I tried both 5.2.1 and 4.10. I even tried a linux howto. I read a section on the HAndbook regarding this very same card. Google, google and googled. So now you are my last hope! Attached there is the log I get when I try setting 1024x768 _only_ on colordepth16. Has anyone ever performed this wonder of getting this resolution with this card? Any suggestions? thanks in advance, Paulo ROberto __________________________________ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/ [-- Attachment #2 --] /usr/X11R6/bin/startxfce4: Starting X server XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 4.10 i386 [ELF] Build Date: 29 April 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jun 3 19:24:08 2004 (==) Using config file: "/etc/X11/XF86Config" (EE) I810(0): No valid modes. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xfree86.org. X connection to :0.0 broken (explicit kill or server shutdown). [-- Attachment #3 --] Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "record" Load "xtrap" Load "speedo" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" # Option "XkbModel" "pc105" # Option "XkbLayout" "pt" # Option "XkbVariant" "nodeadkeys" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> Identifier "Card0" Driver "i810" VideoRam 8192 VendorName "Intel Corp." BoardName "852GM/852GME/855GM/855GME Chipset Graphics Controller" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 16 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 # Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection [-- Attachment #4 --] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci_cfgintr_virgin: using routable interrupt 9 pci_cfgintr: ROUTE_INTERRUPT failed. pcic0: <YENTA PCI-CardBus Bridge> at device 4.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pci_cfgintr_virgin: using routable interrupt 9 pci_cfgintr: ROUTE_INTERRUPT failed. pcic0: No PCI interrupt routed, trying ISA. pcic0: Polling mode pccard0: <PC Card 16-bit bus (classic)> on pcic0 pci_cfgintr_virgin: using routable interrupt 9 pci_cfgintr: ROUTE_INTERRUPT failed. pcic1: <YENTA PCI-CardBus Bridge> at device 4.1 on pci2 pcic1: PCI Memory allocated: 0x88001000 pci_cfgintr_virgin: using routable interrupt 9 pci_cfgintr: ROUTE_INTERRUPT failed. pcic1: No PCI interrupt routed, trying ISA. pcic1: Polling mode pccard1: <PC Card 16-bit bus (classic)> on pcic1 isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 ATA100 controller> port 0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 10 pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xe0100800-0xe01008ff,0xe0100c00-0xe0100dff irq 10 at device 31.5 on pci0 pcm0: <Avance Logic ALC202 AC97 Codec> pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 10 eisa0: <EISA bus> on motherboard eisa0: unknown card @@@0000 (0x00000000) at slot 1 orm0: <Option ROMs> at iomem 0xcd000-0xcdfff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppi0: <Parallel I/O> on ppbus0 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, unlimited logging ad0: 19077MB <ST92011A> [38760/16/63] at ata0-master UDMA100 acd0: CD-RW <QSI CD-RW/DVD-ROM SBW-241> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a can't re-use a leaf (firewire_debug)! can't re-use a leaf (fwmem_debug)! module_register: module fwohci/firewire already exists! linker_file_sysinit "firewire.ko" failed to register! 17 Connection attempt to TCP 127.0.0.1:113 from 127.0.0.1:2769 flags:0x02
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040604220309.74031.qmail>