Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 11 Jun 2022 18:01:17 +0000
From:      Lorenzo Salvadore <salvadore@freebsd.org>
To:        freebsd-hackers@freebsd.org
Cc:        freebsd-current@freebsd.org, freebsd-stable@freebsd.org
Subject:   FreeBSD Quarterly Status Report First Quarter 2022
Message-ID:  <YqTYbYr4P/Oh%2BNif@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
FreeBSD Quarterly Status Report First Quarter 2022

As things are yet again settling into a new normal, it’s once again time for a
status report for the FreeBSD Project.

You may have noticed that this report is also a little on the late side, and
it’s with regret that it’s taken this long to get to it - however, thanks to a
few kind souls who’ve stepped up to the plate, in addition to the folks on the
team who do things quietly in the background, future reports should hopefully
be more on time.

So let’s get some introductions in order, as yours truly is delighted to accept
a hand from Pau Amma who already has been helping with reviews for a while,
Lorenzo Salvadore who is stepping up to get some tooling in place to make it
less of a chore to make the reports, as well as Sergio Carlavilla who is
stepping up to help with all the work that can’t be easily automated.

This report covers a very diverse set of topics including but not limited to
accessibility, system boot speed-up, an implementation of GEOM union, changes
to the WiFi situation, and many other things.

We hope you’ll enjoy reading it!

Daniel Ebdrup Jensen, on behalf of the status report team.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

A rendered version of this report is available here:
https://www.freebsd.org/status/report-2022-01-2022-03/

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Table of Contents

  • FreeBSD Team Reports
      □ FreeBSD Foundation
      □ FreeBSD Release Engineering Team
      □ Cluster Administration Team
      □ Continuous Integration
      □ Ports Collection
  • Projects
      □ FreeBSD Accessibility
      □ Boot Performance Improvements
  • Kernel
      □ ENA FreeBSD Driver Update
      □ A New GEOM Facility, gunion
      □ Realtek Wireless driver support
      □ Intel Wireless driver support and LinuxKPI 802.11 compatibility layer
      □ Kernel Crypto changes to support WireGuard
  • Documentation
      □ Documentation Engineering Team
  • Ports
      □ KDE on FreeBSD
      □ Elsewhere
      □ FreeBSD Office Team
      □ lang/gcc* ports need some love and attention
      □ PortConfig
      □ Wifibox: Use Linux to drive your wireless card on FreeBSD
  • Third Party Projects
      □ helloSystem
      □ Containers and FreeBSD: Pot, Potluck and Potman
      □ Fpart and fpsync

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

FreeBSD Team Reports

Entries from the various official and semi-official teams, as found in the
Administration Page.

FreeBSD Foundation

Links:
FreeBSD Foundation URL: https://www.FreeBSDFoundation.org
Technology Roadmap URL: https://FreeBSDFoundation.org/blog/technology-roadmap/
Donate URL: https://www.FreeBSDFoundation.org/donate/
Foundation Partnership Program URL: https://www.FreeBSDFoundation.org/
FreeBSD-foundation-partnership-program
FreeBSD Journal URL: https://www.FreeBSDFoundation.org/journal/
Foundation News and Events URL: https://www.FreeBSDFoundation.org/
news-and-events/

Contact: Deb Goodkin <deb@FreeBSDFoundation.org>

The FreeBSD Foundation is a 501(c)(3) non-profit organization dedicated to
supporting and promoting the FreeBSD Project and community worldwide. Donations
from individuals and corporations are used to fund and manage software
development projects, conferences, and developer summits. We also provide
travel grants to FreeBSD contributors, purchase and support hardware to improve
and maintain FreeBSD infrastructure, and provide resources to improve security,
quality assurance, and release engineering efforts. We publish marketing
material to promote, educate, and advocate for the FreeBSD Project, facilitate
collaboration between commercial vendors and FreeBSD developers, and finally,
represent the FreeBSD Project in executing contracts, license agreements, and
other legal arrangements that require a recognized legal entity.

Here are some highlights from the Foundation for the first quarter of 2022.

Fundraising Efforts

As promised, we updated our fundraising meter for 2022. So far, we’ve raised
over $84,000 towards our 2022 goal of $1,400,000. We’d like to thank our
individual and corporate donors for supporting our efforts this year. We’d also
like to give a big shout out to our Gold Sponsor, Facebook, Silver Sponsors,
VMware and Tarsnap, and the companies that provide free hosting for the
Project: Bytemark, 365 Data Centers, NYI, NextArray, Sentex Data
Communications, and the Computer Science Department at NCTU.

You can find out how we spent your donations by reading about what we supported
in Q1, in this report, and our Spring Newsletter.

If you haven’t made a donation this year, please consider making a donation now
at https://freebsdfoundation.org/donate/.

We also have a Partnership Program for larger commercial donors. You can find
out more at https://freebsdfoundation.org/our-donors/
freebsd-foundation-partnership-program/

OS Improvements

During the first quarter of 2022, 372 src, 41 ports, and 16 doc tree commits
were made that identified The FreeBSD Foundation as a sponsor. # This
represents 16, 0.4, and 5% of the total number of commits in each repository.

You can read about Foundation-sponsored projects in individual quarterly report
entries:

  • Crypto changes for WireGuard

  • Intel Wireless driver support

Here is a small sample of other base system improvements from Foundation
developers this quarter that do not have separate report entries.

riscv: Add support for enabling SV48 mode

SV48 is intended for systems for which a 39-bit virtual address space is
insufficient. This change increases the size of the user map from 256GB to
128TB. The kernel map is left unchanged for now.

For now SV48 mode is left disabled by default, but can be enabled with a
tunable. Note that extant hardware does not implement SV48, but QEMU does.

  • In pmap_bootstrap(), allocate a L0 page and attempt to enable SV48 mode. If
    the write to SATP doesn’t take, the kernel continues to run in SV39 mode.

  • Define VM_MAX_USER_ADDRESS to refer to the SV48 limit. In SV39 mode, the
    region [VM_MAX_USER_ADDRESS_SV39, VM_MAX_USER_ADDRESS_SV48] is not
    mappable.

Add v3 support to CTF tools

CTF, the Compact C Type Format, is a representation of type information most
often contained within ELF binaries. This type information is helpful for
probing tools like DTrace. Recent work by Mark Johnston allows different Dtrace
providers like the FBT (Function Boundary Tracing) provider to work with
version 3 of CTF.

FreeBSD on the Framework Laptop

Two Foundation staff members, Ed Maste and Mark Johnston, as well as a few
developers and community members now each have access to Framework laptops,
which are designed to make hardware upgrades, repairs, and customizations
straightforward for the average user. The goal of this work is to ensure that
the experience running FreeBSD on the laptops matches the stability that
FreeBSD users expect.

Recent improvements and fixes include:

  • Making audio switch appropriately between speakers and the headphone jack
    when headphones are plugged in or unplugged

  • Fixing bug 259230, which would cause a Framework laptop to reboot or power
    off when the touchpad was used.

  • Adding the Tempo Semiconductor 92HD95B HDA codec ID

  • Temporarily fixing stalled usb enumeration, bluetooth, and S3 resume. The
    temporary fix is to avoid attaching to several newer Intel controllers,
    which require firmware to be loaded, which is different from that
    implemented by ng_ubt_intel and iwmbtfw, so they are not usable yet.

  • Avoiding a 16 second boot delay, by probing the TSC frequency earlier. This
    lets us use the TSC to implement early DELAY, limiting the use of the
    sometimes-unreliable 8254 PIT.

You can follow news about FreeBSD work on the Framework laptop at: https://
wiki.freebsd.org/Laptops/Framework_Laptop.

Continuous Integration and Quality Assurance

The Foundation provides a full-time staff member and funds projects to improve
continuous integration, automated testing, and overall quality assurance
efforts for the FreeBSD project.

Supporting FreeBSD Infrastructure

The Foundation provides hardware and support for the Project. At the time of
writing, the server that will become the new Australian mirror has arrived in
Australia, has a fresh FreeBSD install and will shortly join the cluster.

FreeBSD Advocacy and Education

Much of our effort is dedicated to Project advocacy. This may involve
highlighting interesting FreeBSD work, producing literature, attending events,
or giving presentations. The goal of the literature we produce is to teach
people FreeBSD basics and help make their path to adoption or contribution
easier. Other than attending and presenting at events, we encourage and help
community members run their own FreeBSD events, give presentations, or staff
FreeBSD tables.

The FreeBSD Foundation sponsors many conferences, events, and summits around
the globe. These events can be BSD-related, open source, or technology events
geared towards underrepresented groups. We support the FreeBSD-focused events
to help provide a venue for sharing knowledge, working together on projects,
and facilitating collaboration between developers and commercial users. This
all helps provide a healthy ecosystem. We support the non-FreeBSD events to
promote and raise awareness of FreeBSD, to increase the use of FreeBSD in
different applications, and to recruit more contributors to the Project. We are
continuing to attend virtual events and began planning the June 2022 Developer
Summit.

Check out some of the advocacy and education work we did last quarter:

  • Committed to hosting a FreeBSD Workshop at SCALE 19x and serve as a Media
    Sponsor - July 28-31, 2022 in Los Angeles, CA

  • Participated in the FLOSS Weekly Podcast - January 5, 2022 https://twit.tv/
    shows/floss-weekly/episodes/662

  • Sent out the 2021 Impact Report showcasing how we supported the Project
    last year. https://freebsdfoundation.org/blog/
    2021-freebsd-foundation-impact-report/

  • Hosted a stand at FOSDEM 2022 - Videos from the stand can be found at:
    https://youtube.com/playlist?list=PLugwS7L7NMXxwqIRg1PlhgzhNRi1eVdRQ

  • Participated in the Open Source Voices Podcast - Episode to be aired in
    late April [note from status report team: the episode has indeed be aired
    and is now available at https://www.opensourcevoices.org/29; unfortunately,
    there is and will be no transcript.]

  • Began planning the June 2022 FreeBSD Developers Summit taking place
    virtually, June 16-17, 2022 https://wiki.freebsd.org/DevSummit/202206

  • Held a new FreeBSD Friday - How to Track FreeBSD Using Git Pt. 2 https://
    youtu.be/Fe-dJrDMK_0

  • Presented at the St. Louis Unix User Group on March 9, 2022 https://ow.ly/
    1QXn50Ivj75

  • Served as Admins and were accepted as a mentoring organization for the 2022
    Google Summer of Code

  • Held an Office Hours session on Google Summer of Code. https://youtu.be/
    x-4U1xurmBE

  • Hosted a booth at the virtual Open Source 101 conference on March 29, 2022

  • New blog posts:

      □ RAID-Z Expansion Feature for ZFS In the Home Stretch

      □ What’s Ahead for FreeBSD and the Foundation in 2022

      □ Work with FreeBSD in Google Summer of Code

  • New How-To Guide: An Introduction to FreeBSD Jails

  • New FreeBSD Journal Article: Contributing to FreeBSD ports with Git

We help educate the world about FreeBSD by publishing the professionally
produced FreeBSD Journal. As we mentioned previously, the FreeBSD Journal is
now a free publication. Find out more and access the latest issues at https://
www.FreeBSDfoundation.org/journal/

You can find out more about events we attended and upcoming events at https://
www.FreeBSDfoundation.org/news-and-events/.

Legal/FreeBSD IP

The Foundation owns the FreeBSD trademarks, and it is our responsibility to
protect them. We also provide legal support for the core team to investigate
questions that arise.

Go to https://www.FreeBSDFoundation.org to find more about how we support
FreeBSD and how we can help you!

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

FreeBSD Release Engineering Team

Links:
FreeBSD 13.1-RELEASE schedule URL: https://www.freebsd.org/releases/13.1R/
schedule/
FreeBSD 13.1 Release Information URL: https://www.freebsd.org/releases/13.1R/
[link added by status report team as this quarterly status report is being
published after 13.1-RELEASE has been released]
FreeBSD releases URL: https://download.freebsd.org/ftp/releases/ISO-IMAGES/
FreeBSD development snapshots URL: https://download.freebsd.org/ftp/snapshots/
ISO-IMAGES/

Contact: FreeBSD Release Engineering Team, <re@FreeBSD.org>

The FreeBSD Release Engineering Team is responsible for setting and publishing
release schedules for official project releases of FreeBSD, announcing code
freezes and maintaining the respective branches, among other things.

During the first quarter of 2022, the Release Engineering Team completed work
on, and submitted to the developers the 13.1-RELEASE schedule. This will be the
second point release from the stable/13 branch. As of this writing, three BETA
builds have been run, with at least two RC builds before the final release,
currently scheduled for April 21, 2022.

We look forward to another consistently stable release at the end of this
cycle, as well as many more to come for other branches moving forward.

Additionally throughout the quarter, several development snapshots builds were
released for the main, stable/13, and stable/12 branches.

Sponsor: Rubicon Communications, LLC ("Netgate") Sponsor: The FreeBSD
Foundation

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Cluster Administration Team

Links:
Cluster Administration Team members URL: https://www.freebsd.org/administration
/#t-clusteradm

Contact: Cluster Administration Team <clusteradm@FreeBSD.org>

FreeBSD Cluster Administration Team members are responsible for managing the
machines the Project relies on to synchronise its distributed work and
communications. In this quarter, the team has worked on the following:

  • Improved web service performance and security

      □ Moved some critical services to newer machines

      □ Swept all services to ensure the support of TLS v1.2 and v1.3 and
        disable v1 and v1.1

      □ Enabled dual-stack certificates for the primary FreeBSD web services.
        ECDSA and RSA certificates, preferring ECDSA, discussed with secteam@,
        benefit the project in favor of security and performance matter.

  • Infrastructure improvements at primary site

      □ Evicted some very old hardware

      □ Moved cluster internal services to newer hardware

          ☆ Build host

          ☆ Parts of LDAP, kerberos, DNS and NTP

  • Installed an additional aarch64 package builder

      □ ampere3.nyi.freebsd.org

      □ Identical specs to ampere[12].nyi.freebsd.org

  • Moved ftp0.nyi.freebsd.org to an aarch64 machine.

  • Main distributed mirror site, download.freebsd.org, enhancements

      □ Updated offline documentation (PDF and HTML) in the mirrors.
        The old directory /doc is now on ftp-archive; it contains files prior
        to the Hugo/Asciidoctor migration.

      □ Moved ports INDEX files to distributed mirror, download.freebsd.org

      □ Removed /ftp from the canonical URLs of files on download.freebsd.org.
        Old URLs are still valid.

  • Cleanup of Handbook/Mirrors section
    Much stale information; now there is more info about the official mirrors
    and locations. Former official mirrors are now named 'Community mirrors'.

  • Ongoing day to day cluster administration

      □ Cluster refresh

      □ Replacing failed disks

      □ Babysitting pkgsync

Work in progress:

  • Improve the package building infrastructure

  • Review the service jails and service administrators operation

  • Set up powerpc pkgbuilder/ref/universal machines

  • Search for more providers that can fit the requirements for a generic
    mirrored layout or a tiny mirror

  • Work with doceng@ to improve https://www.freebsd.org and https://
    docs.freebsd.org

  • Improve the web service architecture

  • Improve the cluster backup plan

  • Improve the log analysis system

  • Set up Australia mirror

  • Hardware refresh

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Continuous Integration

Links:
FreeBSD Jenkins Instance URL: https://ci.FreeBSD.org
FreeBSD CI artifact archive URL: https://artifact.ci.FreeBSD.org
FreeBSD Jenkins wiki URL: https://wiki.freebsd.org/Jenkins
Hosted CI wiki URL: https://wiki.freebsd.org/HostedCI
3rd Party Software CI URL: https://wiki.freebsd.org/3rdPartySoftwareCI
Tickets related to freebsd-testing@ URL: https://preview.tinyurl.com/y9maauwg
FreeBSD CI Repository URL: https://github.com/freebsd/freebsd-ci
dev-ci Mailing List URL: https://lists.freebsd.org/subscription/dev-ci

Contact: Jenkins Admin <jenkins-admin@FreeBSD.org>
Contact: Li-Wen Hsu <lwhsu@FreeBSD.org>
Contact: freebsd-testing Mailing List
Contact: IRC #freebsd-ci channel on EFNet

The FreeBSD CI team maintains the continuous integration system of the FreeBSD
project. The CI system checks the committed changes can be successfully built,
then performs various tests and analysis over the newly built results. The
artifacts from those builds are archived in the artifact server for further
testing and debugging needs. The CI team members examine the failing builds and
unstable tests and work with the experts in that area to fix the code or adjust
test infrastructure.

During the first quarter of 2022, we continued working with the contributors
and developers in the project to fulfil their testing needs and also keep
collaborating with external projects and companies to improve their products
and FreeBSD.

Important changes:

  • DTrace tests are running with KASAN now.

  • Fixed and resumed the powerpc64le test jobs.

Retired jobs:

  • The jobs of main branch on mips* were removed.

Work in progress and open tasks:

  • Designing and implementing pre-commit CI building and testing (to support
    the workflow working group)

  • Designing and implementing use of CI cluster to build release artifacts as
    release engineering does

  • Collecting and sorting CI tasks and ideas here

  • Testing and merging pull requests in the FreeBSD-ci repo

  • Reducing the procedures of CI/test environment setting up for contributors
    and developers

  • Setting up the CI stage environment and putting the experimental jobs on it

  • Setting up public network access for the VM guest running tests

  • Implementing using bare metal hardware to run test suites

  • Adding drm ports building tests against -CURRENT

  • Planning to run ztest tests

  • Adding more external toolchain related jobs

  • Improving maturity of the hardware lab and adding more hardware under test

  • Helping more software get FreeBSD support in its CI pipeline (Wiki pages:
    3rdPartySoftwareCI, HostedCI)

  • Working with hosted CI providers to have better FreeBSD support

Please see freebsd-testing@ related tickets for more WIP information, and don’t
hesitate to join the effort!

Sponsor: The FreeBSD Foundation

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Ports Collection

Links:
About FreeBSD Ports URL:https://www.FreeBSD.org/ports/
Contributing to Ports URL: https://docs.freebsd.org/en/articles/contributing/#
ports-contributing
FreeBSD Ports Monitoring URL: http://portsmon.freebsd.org/
Ports Management Team URL: https://www.freebsd.org/portmgr/
Ports Tarball URL: http://ftp.freebsd.org/pub/FreeBSD/ports/ports/

Contact: René Ladan <portmgr-secretary@FreeBSD.org>
Contact: FreeBSD Ports Management Team <portmgr@FreeBSD.org>

The Ports Management Team is responsible for overseeing the overall direction
of the Ports Tree, building packages, and personnel matters. Below is what
happened in the last quarter.

Before we start with the usual statistics, portmgr is happy to announce it has
successfully restarted its lurker program. The first two lurkers are pizzamig@
and se@; they will learn about the inner workings of portmgr and bring in new
ideas.

Portmgr also started having bi-weekly meetings, some public results are: *
restarting the lurker program * fixes to ports going backwards in version *
dropping DragonFlyBSD version checks in bsd.port.mk * dropping deprecation
notes from ports transitively using Python 2.7

Currently we have over 46,800 ports in the Ports Tree. There are currently
2,700 open ports PRs of which 680 are unassigned. The last quarter saw 9,403
commits to the main branch by 157 committers and 683 commits to the 2022Q1
branch by 63 committers. Compared to last quarter, this means a slight drop in
activity to the main branch and a slight increase in the number of open PRs.

No new committers joined during the last quarter, portmgr took koobs@' commit
bit in for safekeeping because of a lack of recent commits.

The cluster administration team has provided portmgr with a third aarch64
builder; it is being used for package builds.

Things that happened in git: * Two new USES were introduced: elfctl to change
an ELF binary’s feature control note minizip to get the correct library
dependency on minizip * Two keywords got removed: fcfontsdir (now handled by
USES=fonts) glib-schemas, it has been replaced by a trigger * Default versions
that changed: Lazarus switched to 2.2.0 PHP switched to 8.0 * Some upgrades to
major ports: Chromium 100.0.4896.60 Electron 13.6.9 Firefox 99.0 Firefox ESR
91.8.0 Gnome 41 KDE Frameworks 5.92.0 ** KDE Plasma 5.24.4

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Projects

Projects that span multiple categories, from the kernel and userspace to the
Ports Collection or external projects.

FreeBSD Accessibility

Links:
Accessibility wiki page URL: https://wiki.freebsd.org/Accessibility
List introduction, goals, audience, and ground rules URL: link:https://
lists.freebsd.org/archives/freebsd-accessibility/2021-October/000000.html

Contact: Pau Amma <pauamma@gundo.com>
Contact: FreeBSD accessibility discussions <freebsd-accessibility@freebsd.org>

Over the past several months, I’ve started putting together tools and resources
to help make the FreeBSD ecosystem (more) accessible to people with
disabilities:

  • a mailing list

  • a set of wiki pages including resources and a categorized wish list

  • tooling including a searchable accessibility Bugzilla keyword and an
    accessibility Phabricator group

I need all the help I can get with:

  • specifying, designing, implementing, and testing the items on the wishlist

  • adding to the wishlist in areas were have little or no experience or for
    things I missed

  • moving beyond software and documentation to processes and culture

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Boot Performance Improvements

Links:
Wiki page URL: https://wiki.freebsd.org/BootTime
OS boot time comparison URL: https://www.daemonology.net/blog/
2021-08-12-EC2-boot-time-benchmarking.html

Contact: Colin Percival <cperciva@FreeBSD.org>

Colin Percival is coordinating an effort to speed up the FreeBSD boot process.
For benchmarking purposes, he is primarily using an EC2 c5.xlarge instance as a
reference platform and is measuring the time between when the virtual machine
enters the EC2 "running" state and when it is possible to SSH into the
instance.

This work started in 2017, and as of the end of December 2021 the FreeBSD boot
time was reduced from approximately 30 seconds to approximately 10 seconds.
During 2022Q1, further improvements have shaved more time off the boot process,
taking it down to roughly 8 seconds

Two major issues remain outstanding:

 1. The first time an EC2 instance boots, dhclient takes about 2 seconds longer
    than normal to get an IPv4 address. The cause of this is unknown and
    requires investigation.

 2. IPv6 configuration includes two one-second-long sleep(1) invocations, one
    from /etc/rc.d/netif and the other from /etc/rc.d/rtsold. It might be
    possible to simply remove these; but care is needed to avoid progressing
    too far in the boot process before IPv6 addresses are configured. Input
    from IPv6 experts is required here.

Issues are listed on the wiki page as they are identified; the wiki page also
has instructions for performing profiling. Users are encouraged to profile the
boot process on their own systems, in case they experience delays which don’t
show up on the system Colin is using for testing.

This work is supported by Colin’s FreeBSD/EC2 Patreon.

Sponsor: https://www.patreon.com/cperciva

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Kernel

Updates to kernel subsystems/features, driver support, filesystems, and more.

ENA FreeBSD Driver Update

Links:
ENA README URL: https://github.com/amzn/amzn-drivers/blob/master/kernel/fbsd/
ena/README

Contact: Michal Krawczyk <mk@semihalf.com>
Contact: Dawid Gorecki <dgr@semihalf.com>
Contact: Marcin Wojtas <mw@semihalf.com>

ENA (Elastic Network Adapter) is the smart NIC available in the virtualized
environment of Amazon Web Services (AWS). The ENA driver supports multiple
transmit and receive queues and can handle up to 100 Gb/s of network traffic,
depending on the instance type on which it is used.

Completed since the last update:

  • Add IPv6 layer 4 checksum offload support to the driver

  • Add NUMA awareness to the driver when the RSS kernel option is enabled

  • Rework validation of the Tx request ID

  • Change lifetime of the driver’s timer service

  • Avoid reset triggering when the device is unresponsive

Work in progress:

  • Prototype the driver port to the iflib framework

  • Tests of the incoming ENA driver release (v2.5.0)

Sponsor: Amazon.com Inc

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

A New GEOM Facility, gunion

Contact: Marshall Kirk McKusick <mckusick@mckusick.com>

The gunion facility is used to track changes to a read-only disk on a writable
disk. Logically, a writable disk is placed over a read-only disk. Write
requests are intercepted and stored on the writable disk. Read requests are
first checked to see if they have been written on the top (writable disk) and
if found are returned. If they have not been written on the top disk, then they
are read from the lower disk.

The gunion facility can be especially useful if you have a large disk with a
corrupted filesystem that you are unsure of how to repair. You can use gunion
to place another disk over the corrupted disk and then attempt to repair the
filesystem. If the repair fails, you can revert all the changes in the upper
disk and be back to the unchanged state of the lower disk thus allowing you to
try another approach to repairing it. If the repair is successful you can
commit all the writes recorded on the top disk to the lower disk.

Another use of the gunion facility is to try out upgrades to your system. Place
the upper disk over the disk holding your filesystem that is to be upgraded and
then run the upgrade on it. If it works, commit it; if it fails, revert the
upgrade.

The gunion(8) utility is used to create and manage an instance of a gunion.
Further details and usage examples can be found in the gunion(8) manual page.
At this time, gunion(8) is available only in 14.0.

Sponsor: Netflix

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Realtek Wireless driver support

Links:
rtw88 status FreeBSD wiki page URL: https://wiki.freebsd.org/WiFi/Rtw88
rtw89 status FreeBSD wiki page URL: https://wiki.freebsd.org/WiFi/Rtw89

Contact: Bjoern A. Zeeb <bz@FreeBSD.org>

While the Intel Wireless driver update project is the main driver behind the
work to bring support for newer chipsets and eventually newer IEEE 802.11
standards support, there is also an ongoing effort to support more drivers. The
next two drivers in the (already longer) queue are Realtek’s rtw88 and rtw89.

While the initial driver porting efforts for rtw88 and rtw89 happened on
personal time, the LinuxKPI integration has to be done more and more along the
Intel wireless driver work and so thanks are also due to The FreeBSD
Foundation.

The rtw88 driver has started to work on some machines with less than 4GB of
main memory and was committed to the FreeBSD git repository for broader
testing. While our version of the driver is aware of these limitations, the
problem is currently assumed to be outside the driver in the interactions with
LinuxKPI and busdma.

The rtw89 driver has happily started to send packets and has problems receiving
frames at this point. Further investigation will happen as soon as rtw88 is
sorted out and it is expected that rtw89 will then also timely follow into
FreeBSD’s git repository.

The currently known requirements to compile both drivers have mostly gone into
stable/13 and releng/13.1 already.

For the latest state of the development, please check the referenced wiki pages
and follow the freebsd-wireless mailing list.

Sponsor: The FreeBSD Foundation (partly)

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Intel Wireless driver support and LinuxKPI 802.11 compatibility layer

Links:
iwlwifi status FreeBSD wiki page URL: https://wiki.freebsd.org/WiFi/Iwlwifi

Contact: Bjoern A. Zeeb <bz@FreeBSD.org>

The Intel Wireless driver update project aims to bring support for newer
chipsets along with mac80211 LinuxKPI compat code. The dual-licensed Intel
driver code was ported in the past for the iwm(4) native driver; using the
LinuxKPI compat framework allows us to use the driver directly and gives
support to all the latest chipsets, with only minor local modifications. Some
of the changes made while porting the driver to FreeBSD were kindly
incorporated into the upstream Linux driver already.

During the first quarter work continued with about 70 commits. Updating the
driver and firmware reduced differences to the Linux version and gave us
bugfixes and improvements. Changes to the LinuxKPI 802.11 compatibility layer
were made to avoid firmware crashes and possible panics for users along with
other improvements.

Auto-loading support for LinuxKPI PCI drivers was comitted. This means that
iwlwifi(4) will now load automatically during boot if a supported card is
detected without any user interactions. Considering the current state of the
driver and the next release a decision was made that iwm(4) supported chipsets
will continue to attach to iwm(4) for now and only newer and otherwise
unsupported chipsets will use the iwlwifi(4) driver. This is likely going to
change in CURRENT as soon as iwlwifi(4) provides better support than iwm(4).

The code was merged to the stable/13 branch and the current state will be
shipped with the upcoming 13.1-RELEASE.

In addition to The FreeBSD Foundation thanks need to go to all users who have
been testing and reporting back or are patiently waiting for the next update.
For the latest state of the development, please follow the freebsd-wireless
mailing list.

Sponsor: The FreeBSD Foundation

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Kernel Crypto changes to support WireGuard

Contact: John Baldwin <jhb@FreeBSD.org>

During the last quarter, I continued my work to improve the FreeBSD WireGuard
driver. On the FreeBSD side, I added support for the XChaCha20-Poly1305 AEAD
cipher. I also added a dedicated API to support [X]ChaCha20-Poly1035 on small,
flat buffers. Finally, I added an API wrapper for the curve25519 implementation
from libsodium.

For the WireGuard driver, I wrote a series of patches which updates the driver
to use crypto APIs such as those mentioned above in place of internal cipher
implementations. The series also includes a fix to avoid scheduling excessive
crypto tasks as well as a few other small fixes. This series is pending review.

Sponsor: The FreeBSD Foundation

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Documentation

Noteworthy changes in the documentation tree, man-pages, or new external books/
documents.

Documentation Engineering Team

Link: FreeBSD Documentation Project
Link: FreeBSD Documentation Project Primer for New Contributors
Link: Documentation Engineering Team

Contact: FreeBSD Doceng Team <doceng@FreeBSD.org>

The doceng@ team is a body to handle some of the meta-project issues associated
with the FreeBSD Documentation Project; for more information, see FreeBSD
Doceng Team Charter.

No new documentation commit bit was granted during the last quarter, and only
one commit bit was safe kept.

Several tasks were completed related to the doc tree during the last quarter:

  • Fix some issues in the translation workflow with PO files and Weblate
    related to the po4a program.

    More info here.

  • Update offline documentation (PDF and HTML).

    The old directory /doc is now on ftp-archive; it contains files prior to
    the Hugo/Asciidoctor migration.

  • Remove Google Analytics from documentation and website.

  • Add last modified information to the documentation and website pages.

  • Tag FreeBSD docset for 13.1-RELEASE.

  • Add the first Indonesian translation to the doc tree.

FreeBSD Translations on Weblate

Link: Translate FreeBSD on Weblate
Link: FreeBSD Weblate Instance

The translation workflow with Weblate is more mature at this point. Several
issues were fixed between PO files and po4a program.

We welcome everyone to try our Weblate instance to translate a few documents.

The first Indonesian translation was added to the FreeBSD project. We thank
Azrael JD for the contribution, and we are looking forward to seeing more
Indonesian translations.

Q1 2022 Status

  • 12 languages (1 new language)

  • 142 registered users

Languages

  • Chinese (Simplified) (zh-cn)

  • Chinese (Traditional) (zh-tw)

  • Dutch (nl)

  • French (fr)

  • German (de)

  • Indonesian (id) - Added

  • Italian (it)

  • Norwegian (nb-no)

  • Persian (fa-ir)

  • Portuguese (pt-br)

  • Spanish (es)

  • Turkish (tr)

We want to thank everyone that contributed, translating or reviewing documents.

And please, help promote this effort on your local user group, we always need
more volunteers.

FreeBSD Website Revamp - WebApps working group

Contact: Sergio Carlavilla <carlavilla@FreeBSD.org>

Working group in charge of creating the new FreeBSD Documentation Portal and
redesigning the FreeBSD main website and its components. FreeBSD developers can
follow and join the working group on the FreeBSD Slack channel #wg-www21. The
work will be divided into four phases:

 1. Redesign of the Documentation Portal

    Create a new design, responsive and with global search. (Complete)

 2. Redesign of the Manual Pages on web

    Scripts to generate the HTML pages using mandoc. (Work in progress)

 3. Redesign of the Ports page on web

    Ports scripts to create an applications portal. (Work in progress)

 4. Redesign of the FreeBSD main website

    New design, responsive and dark theme. (Not started)

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Ports

Changes affecting the Ports Collection, whether sweeping changes that touch
most of the tree, or individual ports themselves.

KDE on FreeBSD

Links:
KDE FreeBSD URL: https://freebsd.kde.org/
KDE Community FreeBSD URL: https://community.kde.org/FreeBSD

Contact: Adriaan de Groot <kde@FreeBSD.org>

The KDE on FreeBSD project packages the software from the KDE Community, along
with dependencies and related software, for the FreeBSD ports tree. The
software includes a full desktop environment called KDE Plasma (for both X11
and Wayland) and hundreds of applications that can be used on any FreeBSD
machine.

The KDE team (kde@) is part of desktop@ and x11@ as well, building the software
stack to make FreeBSD beautiful and usable as a daily-driver graphics-based
desktop machine.

KDE Qt Patch Collection The Qt Company did not release Qt 5.15 updates under
Open Source licenses in 2021, leaving the Open Source 5.15 version lagging
behind the proprietary release. Qt 6 is released under an Open Source license,
but for the world of Open Source software that requires Qt 5, there is still a
need for updates. The KDE Community fills that need by maintaining a curated
set of patches — generally backported from Qt6 — to maintain the Open Source
version of Qt 5. FreeBSD ports now use this KDE Qt Patch Collection, rather
than the outdated last Qt 5.15.2 release from the Qt Company. This landed both
in main and the last quarterly branch for 2021, since it brings important
bugfixes.

KDE Stack

  • KDE Plasma Desktop (all the /plasma5- ports) was updated to 5.23.5 at the
    start of the year. Since this happened very shortly after quarterly was
    branched, this was MFH’ed. The long-term-support release 5.24 landed
    mid-february. The FreeBSD ports do not stick to LTS releases, and will
    follow the regular release schedule. 5.24.3 landed on schedule in March.

  • KDE Gear (the collection of KDE libraries and applicatious outside of the
    Frameworks and Plasma Desktop groups) was updated to 21.12.1 and MFH’ed.
    Monthy releases landed as well: 21.12.2 in February.

  • KDE Frameworks have a monthly release cadence, so 5.90 landed in January,
    5.91 in February and 5.92 in March.

  • KDE PIM currently does not support Contacts stored in a Google account
    because Google has changed the available REST API.

  • astro/kstars received its regularly scheduled updates.

  • deskutils/kalendar was updated. It has now reached the 1.0 stage.

  • deskutils/kodaskanna was added to the ports tree. It is a simple QR-code
    scanner for the desktop.

  • deskutils/latte-dock is an alternative launcher for use in KDE Plasma
    Desktop and other environments. It was updated to 0.10.7 as part of its
    monthly releases.

  • devel/okteta, an editor and viewer for binary data, was updated to 0.26.7,
    a regular bugfix release.

  • graphics/digikam, the digital photography manager, was updated to 7.6.0.
    (Thanks Dima Panov)

  • graphics/kf5-kimageformats has a new option enabling libheif and HEIC
    support.

  • graphics/kontrast was added to the 'accessibility' category. This is a tool
    for checking color-combinations (e.g. for a website) for sufficient
    contrast and readability.

  • graphics/krita was updated to the next big release, Krita 5. (Thanks Max
    Brazhnikov)

  • lang/kross-interpreters was fixed for Ruby 3. (Thanks Yasuhiro Kimura)

  • sysutils/plasma5-discover was updated to resolve some denial-of-service
    bugs in KDE infrastructure.

  • www/falkon was updated. After a two-year wait, a new release of the KDE web
    browser built on Qt WebEngine (itself a wrapper around Chromium internals)
    arrived upstream and in ports.

  • x11/plasma5-plasma-workspace now can properly edit login and account
    information.

Related Applications

  • devel/qtcreator was updated to version 6. A new versioning model has been
    introduced by upstream, so this will now jump by major release number
    regularly. (Thanks to Florian Walpen)

  • irc/quassel was updated. Quassel is a distributed IRC client (think of it
    as your own personal IRC bouncer).

  • misc/tellico was updated. Tellico is a "collection manager", for instance
    collections of books, music, stamps, or FreeBSD releases.

  • net-im/nheko was updated. This is one of a dozen Matrix clients available
    in the ports tree.

Elsewhere

  • archivers/7-zip is the preferred tool for dealing with 7zip files; this
    affacts KDE applications that work with archives (like archivers/ark). We
    would like to thank makc@ for stewarding that update.

  • devel/libphonenumber has bi-weekly updates to chase the exciting world of
    telephony details.

  • graphics/poppler was updated to version 22.01. This version requires C17,
    which pushes a number of consumers to the newer C standard as well. Most
    consumers were fixed in advance.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

FreeBSD Office Team

Links:
The FreeBSD Office project URL: https://wiki.freebsd.org/Office
The FreeBSD Office mailing list URL: https://lists.freebsd.org/subscription/
freebsd-office

Contact: FreeBSD Office team ML <office@FreeBSD.org>
Contact: Dima Panov <fluffy@FreeBSD.org>
Contact: Li-Wen Hsu <lwhsu@FreeBSD.org>

The FreeBSD Office team works on a number of office-related software suites and
tools such as OpenOffice and LibreOffice.

Work during this quarter was focused on providing the latest stable release of
LibreOffice suite and companion apps to all FreeBSD users.

During the 2022Q1 period we pushed maintenance patches for the LibreOffice 7.2
port to the quarterly branch and brought the latest, 7.3, releases and all
companion libraries such as MDDS, libIxion and more to the ports tree.

Also we are still working on the Boost WIP repository to bring the latest Boost
library to the ports.

We are looking for people to help with the open tasks:

  • The open bugs list contains all filed issues which need some attention

  • Upstream local patches in ports

Patches, comments and objections are always welcome in the mailing list and
Bugzilla.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

lang/gcc* ports need some love and attention

Links:
GCC Project URL: https://gcc.gnu.org
GCC 11 release series URL: https://gcc.gnu.org/gcc-11/

Contact: toolchain@FreeBSD.org
Contact: Gerald Pfeifer <gerald@pfeifer.com>

After about two decades of maintaining FreeBSD’s lang/gcc* ports, the time came
to hand over the baton and mostly step back. Alas the baton essentially dropped
to the floor, despite multiple calls for help.

Here are a few specific tasks looking for help:

  • Upgrade GCC_DEFAULT in Mk/bsd.default-versions.mk from 10 to 11, including
    fixing the (luckily minor) fall out of an -exp run: https://
    bugs.freebsd.org/bugzilla/show_bug.cgi?id=258378

  • Three changes to work through with upstream GCC (requires src expertise,
    not ports):

      □ upstreaming lang/gcc11/patch-gets-no-more

      □ upstreaming lang/gcc11/patch-arm-unwind-cxx-support

      □ https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=256874

  • We have removed the unmaintained lang/gcc9-devel and lang/gcc10-devel
    ports, alas kept lang/gcc11-devel and lang/gcc12-devel which would be good
    to see if not weekly, then somewhat regular updates.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

PortConfig

Links:
Repository portconfig URL: https://gitlab.com/alfix/portconfig/

Contact: Alfonso Sabato Siciliano (upstream) <asiciliano@FreeBSD.org>
Contact: Baptiste Daroussin (port) <bapt@FreeBSD.org>

FreeBSD provides the Ports Collection to give users and administrators a simple
way to install applications. It is possible to configure a port before the
building and installation. PortConfig is an utility for setting the port
options via a Text User Interface.

As each terminal has different properties PortConfig can be customized via
environment variables to set up the User Interface, for example: menu size,
theme, borders, and so on; each feature is documented inside the manual.
Further, if a port has a specific 'pkg-help' file, PortConfig will show a Help
button to open a "popup" with help information.

FreeBSD provides thousands of ports therefore it is not feasible to test
PortConfig for each use; please report any problem.

Alfonso would like to thank Baptiste Daroussin for the port, suggestions, help,
and testing for this utility and its library.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Wifibox: Use Linux to drive your wireless card on FreeBSD

Links:
Project GitHub Page
net/wifibox port

Contact: PÁLI Gábor János <pali.gabor@gmail.com>

Wifibox is an experimental project for exploring the ways of deploying a
virtualized Linux guest to drive wireless networking cards on the FreeBSD host
system. There have been guides on the Internet to suggest the use of such
techniques to improve the wireless networking experience, of which Wifibox aims
to implement as a single easy-to-use software package.

  • bhyve(8) is utilized to run the embedded Linux system. This helps to
    achieve low resource footprint. It requires an x64 CPU with I/O MMU
    (AMD-Vi, Intel VT-d), ~150 MB physical memory, and some disk space
    available for the guest virtual disk image, which can be even ~30 MB only
    in certain cases. It works with FreeBSD 12 and later, some cards may
    require a recent 13-STABLE though.

  • The guest is constructed using Alpine Linux, a security-oriented,
    lightweight distribution based on musl libc and BusyBox.

  • Configuration files are shared with the host system. The guest uses
    wpa_supplicant(8) so it is possible to import the host’s
    wpa_supplicant.conf(8) file without any changes.

  • When configured, wpa_supplicant(8) control sockets could be exposed by the
    guest, which enables use of related utilities directly from the host, such
    as wpa_cli(8) or wpa_gui(8) from the net/wpa_supplicant_gui port/package.

  • Everything is shipped in a single package that can be easily installed and
    removed. This comes with an rc(8) system service that automatically
    launches the guest on boot and stops it on shutdown.

  • A workaround is supplied for laptops to support suspend/resume.

Wifibox has been mainly tested with Intel chipsets so far, and it has shown
great performance and stability. Therefore it might serve as an interim
solution until the Intel Wireless support becomes mature enough. It was
confirmed that Wifibox works with Atheros chipsets too, and feedback is more
than welcome about others. Support for Broadcom chipsets is not yet complete,
that is currently a work in progress.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Third Party Projects

Many projects build upon FreeBSD or incorporate components of FreeBSD into
their project. As these projects may be of interest to the broader FreeBSD
community, we sometimes include brief updates submitted by these projects in
our quarterly report. The FreeBSD project makes no representation as to the
accuracy or veracity of any claims in these submissions.

helloSystem

Links:
Documentation URL: https://hellosystem.github.io/

Contact: Simon Peter <probono@puredarwin.org>
Contact: #helloSystem on irc.libera.chat, mirrored to #helloSystem:matrix.org
on Matrix

What is helloSystem?

helloSystem is FreeBSD preconfigured as a desktop operating system with a focus
on simplicity, elegance, and usability. Its design follows the “Less, but
better” philosophy.

Q1 2022 Status

  • Version 0.8.0 of helloSystem is under development and test

      □ helloSystem 0.8.0 will be based on FreeBSD 13.1-RELEASE

      □ Experimental Live ISOs using FreeBSD 13.1-BETA3 are available

      □ Initial support for running Linux AppImage files using an optional
        Debian runtime

      □ Initial support for the AppImage format in the user interface

      □ Improved reliability and performance of mounted archives by using
        fuse-archive

      □ Various bugfixes

Installable experimental Live ISO images are available at https://github.com/
helloSystem/ISO/releases/tag/experimental-13.1.

Contributing

The project appreciates contributions in various areas.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Containers and FreeBSD: Pot, Potluck and Potman

Links:
Pot organization on github URL: https://github.com/bsdpot

Contact: Luca Pizzamiglio (Pot) <pizzamig@freebsd.org>
Contact: Stephan Lichtenauer (Potluck) <sl@honeyguide.eu>
Contact: Michael Gmelin (Potman) <grembo@freebsd.org>

Pot is a jail management tool that also supports orchestration through Nomad.

As a result of production testing in a real-world cluster deployment, pot and
related projects received stability improvements for controlling the pot
lifecycle (i.e., pot prepare/start/stop).
Various attributes and commands have been developed to improve support of nomad
orchestration and batch jobs (e.g., change dns config during clone, ability to
disable tmpfs, new last-run-stats command). A new pot release will follow soon.

Potluck aims to be to FreeBSD and pot what Dockerhub is to Linux and Docker: a
repository of pot flavours and complete container images for usage with pot and
in many cases nomad.

Many of the core images like Nomad, Consul and Vault that can be used to build
a private cloud and orchestration platform, but also e.g. Prometheus or
PostgreSQL Patroni, have reached a stable status over the last quarter and are
in production use now.

To make navigating the evolving pot ecosystem easier, most project resources
have been centralized in a dedicated github project: https://github.com/bsdpot

There, we plan to release ansible playbooks that allow easily creating a
FreeBSD based orchestration environment from scratch based on all these tools.

As always, feedback and patches are welcome.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Fpart and fpsync

Links:
Project site and documentation URL: https://www.fpart.org
Development URL: https://github.com/martymac/fpart
Port URL: https://www.freshports.org/sysutils/fpart

Contact: Ganael Laplanche <martymac@FreeBSD.org>

What is fpart ?

Fpart is a filesystem partitioner. It helps you sort file trees and pack them
into bags ("partitions").

It uses FreeBSD’s fts(3) implementation (GNU/Linux builds can also use it as an
option), which makes it crawl filesystems very fast.

A hook facility is provided to trigger actions on the partitions produced.

What is fpsync ?

Fpsync is a companion script that uses fpart under the hood to parallelize
rsync(1) or cpio(1) jobs, making it a simple but powerful data migration tool.
Those jobs can be run either locally or remotely (using SSH). Fpsync is often
used by researchers and cloud providers where lots of data need to be moved and
clusters are available to speed up transfers.

Q1 2022 Status

Both tools continued to evolve and saw several bugs fixed; see the changelog.

Also, a user reported a major bug regarding our fts(3) implementation, which
ignores readdir(3) errors. I have reported the bug in our Bugzilla:

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=262038

It should be merged soon (hopefully).

Last but not least, fpart has been referenced in the French Government’s 'SILL'
.

Contributing

If you are interested in contributing, have a look at the TODO list.

Any contribution is welcome, more especially in the field of unit testing.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?YqTYbYr4P/Oh%2BNif>