Date: Tue, 22 Jul 2008 10:16:02 +0300 From: Manolis Kiagias <sonic2000gr@gmail.com> To: Achilleas Mantzios <achill@matrix.gatewaynet.com> Cc: Tore Lund <tl32@next.online.no>, freebsd-questions@freebsd.org Subject: Re: Monitoring CPU temperature: mbmon shows 201 degrees C Message-ID: <48858932.60206@gmail.com> In-Reply-To: <200807220943.42926.achill@matrix.gatewaynet.com> References: <48849FFD.10285.C71CED5@iwrtech.iwr.ru.ac.za> <200807212205.02066.achill@matrix.gatewaynet.com> <4884FEDA.1060109@next.online.no> <200807220943.42926.achill@matrix.gatewaynet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Achilleas Mantzios wrote: > Στις Tuesday 22 July 2008 00:25:46 ο/η Tore Lund έγραψε: > >> Achilleas Mantzios wrote: >> >>> ... >>> Having said that, the issue with the temperature must not be my thing :( >>> after kldload coretemp, i get >>> [achix@panix ~]% sysctl -a | grep tempera >>> hw.acpi.thermal.tz0.temperature: 40,0C >>> dev.cpu.0.temperature: -1 >>> [achix@panix ~]% >>> The first always is stuck to 40 and dev.cpu.0.temperature to -1. >>> >> Achillea, have you told us what CPU you have? Manolis presumes you have >> an Intel, but I do not see this information anywhere in your posts. If >> you have a recent AMD, try the port k8temp. >> > > Sorry, i have a > CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2672.74-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x4400<CNXT-ID,xTPR> > So coretemp is not for me. > Definitely. > While experimenting, i noticed the 1st and 3rd temperatures from mbmon to be updated in a fashion that seems > natural. > [achix@panix ~]% mbmon > Temp.= 41.0, 201.0, 42.0; Rot.= 3443, 0, 0 > Vcore = 1.50, 1.81; Volt. = 3.30, 5.08, 11.43, -11.74, -1.69 > What chipset is the mobo based on? mbmon runs fine on my 865G and a 3Ghz P4 CPU. You are probably correct, the middle temp may represent a sensor that is not recognized, but the other readings seem normal. > I started to trust mbmon, and i think the 1st temp must be motherboard, while the 3rd CPU, > and indeed the first value varies betaeen 41-42 degrees, and the third value from 39, (~ 100% idle) > to 45 (0% idle). So i assume the above must be right. > Yesterday i had mbmon -t > mbmon.out running all night and the highest CPU temp was at 46 deg C, > while highest MB temp was at 43 deg Celsius (if the previous assumptions about the interpretation of the > output of mbmon are correct). > Both high temps happened while running periodic daily at 03:00 (which increased my trust in those). > All that, was after i blew the box/case inside and closed the case. > If i trust those numbers and their interpretation then i must not have a temperature problem (anymore). > Lets see how the machine behaves. > There is always the other usual suspect from the memory department :) > > For memory, I would suggest memtest86. For stressing the machine, try math/mprime in torture mode. Watch the temperatures and make sure you leave it running for a couple of hours and you don't get any errors. Usually, if you have a termperature problem it will bail out in half an hour or less.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48858932.60206>