From owner-cvs-all Sun Dec 10 9:48:51 2000 From owner-cvs-all@FreeBSD.ORG Sun Dec 10 09:48:39 2000 Return-Path: Delivered-To: cvs-all@freebsd.org Received: from c1030098-a.wtrlo1.ia.home.com (c1030098-a.wtrlo1.ia.home.com [24.11.39.39]) by hub.freebsd.org (Postfix) with ESMTP id 634B437B400; Sun, 10 Dec 2000 09:48:37 -0800 (PST) Received: by c1030098-a.wtrlo1.ia.home.com (Postfix, from userid 1001) id DB45314A47; Sun, 10 Dec 2000 11:48:32 -0600 (CST) Sender: mdharnois@mharnois.workgroup.net To: Mike Smith Cc: cvs-all@FreeBSD.ORG Subject: Re: cvs commit: src/sys/pci pci.c pci_if.m pcib_if.m pcireg.h pcisupport.c pcivar.h src/sys/dev/pci eisa_pci.c fixup_pci.c ignore_pci.c isa_pci.c pci_pci.c vga_pci.c pci.c pcivar.h src/sys/modules/agp Makefile src/sys/modules/netgraph/tty Makefile ... Keywords: adding,port,size,irq,range,device,isa0,bus,unknown,align,probe,pnpbios References: <200012101118.eBABILc07113@mass.osd.bsdi.com> <86n1e4lavb.fsf@mharnois.workgroup.net> From: Michael Harnois Date: 10 Dec 2000 11:48:32 -0600 In-Reply-To: <86n1e4lavb.fsf@mharnois.workgroup.net> Message-ID: <864s0cmakv.fsf@mharnois.workgroup.net> Lines: 455 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.2 (Peisino,Ak(B) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-cvs-all@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I updated to include your latest change to isa_pci.c and built a GENERIC kernel to see if there was a problem with my configuration. There was no change to the problem. Attached are boot messages from a working kernel and boot -v messages from the new kernel that does not work. As you will note, and as I said earlier, dc0, dc1 and pcm0 are just not seen by the new kernel. (GENERIC, of course, does not include bktr code, but when I built my usual kernel with your new code the bktr device was not seen either.) The common denominator among these peripherals, AFAIK, is that they represent the devices plugged into PCI card slots on the MB. All the devices built into the MB or attached to integral MB ports (i.e. the mouse) seem to be properly detected. Let me know what other tests I can do. Working kernel: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #31: Wed Dec 6 17:37:58 CST 2000 mdharnois@mharnois.workgroup.net:/usr/src/sys/compile/MYKERNEL Timecounter "i8254" frequency 1193298 Hz Timecounter "TSC" frequency 737091111 Hz CPU: Pentium III/Pentium III Xeon/Celeron (737.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff real memory = 134131712 (130988K bytes) avail memory = 126791680 (123820K bytes) Preloaded elf kernel "kernel" at 0xc03b4000. Pentium Pro MTRR support enabled Using $PIR table, 10 entries at 0xc00f1300 npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: on pcib0 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 pcib2: at device 30.0 on pci0 pci2: on pcib2 pcm0: port 0xd800-0xd83f irq 9 at device 9.0 on pci2 dc0: <82c169 PNIC 10/100BaseTX> port 0xd400-0xd4ff mem 0xf3000000-0xf30000ff irq 9 at device 10.0 on pci2 dc0: Ethernet address: 00:a0:cc:3d:00:ae miibus0: on dc0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: port 0xd000-0xd0ff mem 0xf2800000-0xf28003ff irq 9 at device 11.0 on pci2 dc1: Ethernet address: 00:20:78:04:35:83 miibus1: on dc1 ukphy1: on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bktr0: mem 0xf5000000-0xf5000fff irq 9 at device 12.0 on pci2 bti2c0: iicbb0: on bti2c0 iicbus0: on iicbb0 master-only iicsmb0: on iicbus0 smbus0: on iicsmb0 smb0: on smbus0 iic0: on iicbus0 smbus1: on bti2c0 smb1: on smbus1 bktr0: Hauppauge Model 62471 A bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, dbx stereo. pci2: (vendor=0x109e, dev=0x0878) at 12.1 irq 9 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xb800-0xb80f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 31.3 irq 10 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x12 on isa0 sio0: type 16550A fifo disabled lookalike with 1 bytes FIFO sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources atspeaker0: at port 0x61 on isa0 unknown: can't assign resources DUMMYNET initialized (000608) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled BRIDGE 990810, have 9 interfaces -- index 1 type 6 phy 0 addrl 6 addr 00.a0.cc.3d.00.ae -- index 2 type 6 phy 0 addrl 6 addr 00.20.78.04.35.83 IP Filter: v3.4.13 initialized. Default = pass all, Logging = disabled ad0: 14655MB [29777/16/63] at ata0-master UDMA66 ad3: 2067MB [4200/16/63] at ata1-slave WDMA2 acd0: CD-RW at ata1-master using WDMA2 Mounting root from ufs:/dev/ad0s1a Non-working kernel: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Sun Dec 10 11:22:49 CST 2000 mdharnois@mharnois.workgroup.net:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 737091915 Hz, i8254 clock: 1193299 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 737021875 Hz CPU: Pentium III/Pentium III Xeon/Celeron (737.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff real memory = 134131712 (130988K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0052f000 - 0x07fe2fff, 128663552 bytes (31412 pages) avail memory = 125399040 (122460K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f13d0 bios32: Entry = 0xf0b90 (c00f0b90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xd90 pnpbios: Found PnP BIOS data at 0xc00fbe20 pnpbios: Entry = f0000:be50 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: Preloaded elf kernel "kernel" at 0xc0509000. null: random: mem: Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk WARNING: Driver mistake: destroy_dev on 154/0 Math emulator present Using $PIR table, 10 entries at 0xc00f1300 npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: physical bus=0 found-> vendor=0x8086, dev=0x1130, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x1131, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x244e, revid=0x01 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x2440, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x244b, revid=0x01 bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 4, range 32, base 0000b800, size 4, enabled found-> vendor=0x8086, dev=0x2443, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[20]: type 4, range 32, base 0000e800, size 4, enabled pci0: on pcib0 pcib1: at device 1.0 on pci0 pcib1: secondary bus 6 pcib1: subordinate bus 6 pcib1: I/O decode 0x60000-0x60fff pcib1: memory decode 0x0-0xfffff pcib1: prefetched decode 0x0-0xfffff pci1: physical bus=6 pci1: on pcib1 pcib2: at device 30.0 on pci0 pcib2: secondary bus 6 pcib2: subordinate bus 6 pcib2: I/O decode 0x60000-0x60fff pcib2: memory decode 0x0-0xfffff pcib2: prefetched decode 0x0-0xfffff pci2: physical bus=6 pci2: on pcib2 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xb800-0xb80f at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xb800 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xb808 ata1: mask=03 status0=50 status1=50 ata1: mask=03 ostat0=50 ostat2=50 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=00 b=00 ata1: mask=03 status0=00 status1=50 ata1-slave: ATA probe a=01 b=a5 ata1: devices=06 ata1: at 0x170 irq 15 on atapci0 pci0: at 31.3 (no driver attached) ex_isa_identify() Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 16 devices, largest 126 bytes PNP0401: adding dma mask 0x8 PNP0401: adding irq mask 0x80 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77f, size=0x8, align=0 PNP0401: end config pnpbios: handle 1 device ID PNP0401 (0104d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: end config pnpbios: handle 2 device ID PNP0501 (0105d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 PNP0501: end config pnpbios: handle 3 device ID PNP0501 (0105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 PNP0700: end config pnpbios: handle 4 device ID PNP0700 (0007d041) PNP0f13: adding irq mask 0x1000 PNP0f13: end config pnpbios: handle 7 device ID PNP0f13 (130fd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000 PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000 PNP0c01: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000 PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 PNP0c01: end config pnpbios: handle 8 device ID PNP0c01 (010cd041) INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000 INT0800: end config pnpbios: handle 9 device ID INT0800 (0008d425) PNP0000: adding irq mask 0x4 PNP0000: adding io range 0x20-0x21, size=0x2, align=0 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0 PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0000: end config pnpbios: handle 10 device ID PNP0000 (0000d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: end config pnpbios: handle 11 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: end config pnpbios: handle 12 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: end config pnpbios: handle 13 device ID PNP0303 (0303d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0 PNP0c04: end config pnpbios: handle 14 device ID PNP0c04 (040cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 PNP0200: end config pnpbios: handle 15 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 16 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: end config pnpbios: handle 17 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x3f0-0x3f1, size=0x2, align=0 PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0 PNP0c02: adding io range 0xec00-0xec3f, size=0x40, align=0 PNP0c02: end config pnpbios: handle 18 device ID PNP0c02 (020cd041) sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x12 on isa0 sio0: type 16550A fifo disabled lookalike with 1 bytes FIFO sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc1: no video adapter is found. sc1: failed to probe on isa0 vga1: failed to probe on isa0 isa_probe_children: probing PnP devices unknown: can't assign resources unknown: at port 0x378-0x37f on isa0 unknown: can't assign resources unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources unknown: at port 0x2f8-0x2ff on isa0 unknown: can't assign resources unknown: at port 0x3f2-0x3f5 on isa0 unknown: can't assign resources unknown: at irq 12 on isa0 unknown: failed to probe at port 0x330 iomem 0xffb80000-0xffbfffff on isa0 adv0: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe. adv0: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. adv0: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe. unknown: can't assign resources unknown: at port 0x60 on isa0 adv0: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. adv0: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe. adv0: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: failed to probe at port 0x61 on isa0 adv0: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe. unknown: can't assign resources unknown: at port 0x3f0-0x3f1 on isa0 BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 1:020c7f3f 0..524=525 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: ppp0 attached bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached ata0-master: success setting UDMA4 on ICH2 chip Creating DISK ad0 ad0: ATA-5 disk at ata0-master ad0: 14655MB (30015216 sectors), 29777 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA66 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 14655MB [29777/16/63] at ata0-master UDMA66 ata1-slave: success setting WDMA2 on ICH2 chip Creating DISK ad3 ad3: ATA-0 disk at ata1-slave ad3: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S ad3: 1 secs/int, 1 depth queue, WDMA2 ad3: piomode=4 dmamode=2 udmamode=-1 cblid=0 ad3: 2067MB [4200/16/63] at ata1-slave WDMA2 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: CD-RW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 30015215, size 30015153 : OK start_init: trying /sbin/init IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled ip_fw_ctl: invalid command Linux ELF exec handler installed /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $ /dev/vmmon: Module vmmon: initialized bpf: vmnet1 attached -- Michael D. Harnois, Redeemer Lutheran Church, Washburn, IA mdharnois@home.com aa0bt@aa0bt.ampr.org "It's not what we don't know that hurts us, it's what we know for certain that just ain't so." -- Mark Twain To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe cvs-all" in the body of the message