Date: Thu, 3 Feb 2011 21:35:05 +0000 From: Alexander Best <arundel@freebsd.org> To: David Demelier <demelier.david@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Can't burn with ahci(4) and cdrecord Message-ID: <20110203213505.GA73226@freebsd.org> In-Reply-To: <4D4B11D0.3050709@gmail.com> References: <4D4B11D0.3050709@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu Feb 3 11, David Demelier wrote: > Hello, > > I tried to burn a little iso with ahci(4) instead of old ata drivers and > it fails to burn with : i have similar issues. for me using "-tao" solved the error. cheers. alex > > markand@Melon ~ $ sudo cdrecord downloads/ubuntu-10.10-desktop-i386.iso > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive dependent > defaults. > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.2) Copyright > (C) 1995-2010 Jörg Schilling > Using libscg version 'schily-0.9'. > No target specified, trying to find one... > Using dev=1,0,0. > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : 'hp ' > Identifikation : 'DVDRAM GT20L ' > Revision : 'DC05' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P > RAW/R96R LAYER_JUMP > Starting to write CD/DVD/BD at speed 24 in real SAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > Turning BURN-Free off > cdrecord: WARNING: Drive returns wrong startsec (0) using -150 > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 FF FF FF 6A 00 00 20 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 65536 > cmd finished after 13.147s timeout 200s > write track pad data: error after 0 bytes > BFree: 597 K BSize: 597 K > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 00 00 00 00 00 00 20 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 65536 > cmd finished after 0.001s timeout 200s > write track data: error after 0 bytes > cdrecord: A write error occured. > cdrecord: Please properly read the error message above. > > This is happening on my HP Probook 4510s with 8.2-RC2 amd64. > > -- > David Demelier -- a13x
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110203213505.GA73226>