Date: Mon, 8 Aug 2005 19:58:03 -0400 (EDT) From: "PK" <piotrekk@excite.com> To: algould@datawok.com Cc: freebsd-questions@freebsd.org Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ? Message-ID: <20050808235803.CD6E829995@xprdmailfe22.nwk.excite.com>
next in thread | raw e-mail | index | archive | help
hi
I removed the interface conf. from the cable but still doesn't work.
What's very strange is authmode OPEN:
# ifconfig
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.2.20 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::20f:b5ff:fe26:d1c9%ath0 prefixlen 64 scopeid 0x1
ether 00:0f:c4:12:b2:b8
media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps)
status: no carrier
ssid myssid 1:myssid
channel -1 authmode OPEN powersavemode OFF powersavesleep 100
rtsthreshold 2312 protmode CTS
wepmode MIXED weptxkey 1
wepkey 1:104-bit
howto change it to shared ?
# ifconfig ath0 authmode shared
ifconfig: SIOCS80211: Invalid argument
--- On Mon 08/08, Andrew L. Gould < algould@datawok.com > wrote:
From: Andrew L. Gould [mailto: algould@datawok.com]
To: piotrekk@excite.com
Cc: freebsd-questions@freebsd.org
Date: Mon, 8 Aug 2005 16:43:02 -0500
Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ?
On Mon, 8 Aug 2005 17:19:54 -0400 (EDT)<br>"PK" <piotrekk@excite.com> wrote:<br>> <br>> yes, but cable is disabled at the moment <br><br>Do you mean that the cable is unplugged or that you removed the<br>interface configuration? Unplugging the cable does not change or<br>remove the interface configuration.<br><br>Reconfigure your cabled interface to 10.0.0.1, then test your wireless<br>interface again.<br><br>> <br>> I think there is a problem with DS/1Mbps<br>> this driver seems to allow by default the transfer rate: 1 Mbps <br>> <br>> my wlan access point accept only 54Mbps !<br>> <br>> I think I must change to 54Mbps using ifconfig<br>> <br>> Do you know, howto change this ?<br>> <br>> # ifconfig ath0 media DS/54Mbps<br>> ifconfig: unknown media subtype: DS/54Mbps<br>> <br><br>I think this is handled automatically by default. (I could be very<br>wrong.) <br>
_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050808235803.CD6E829995>