From owner-freebsd-mobile  Mon Feb 25  0:44:33 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from gilberto.physik.RWTH-Aachen.DE (gilberto.physik.RWTH-Aachen.DE [137.226.46.168])
	by hub.freebsd.org (Postfix) with ESMTP id 6458337B400
	for <freebsd-mobile@freebsd.org>; Mon, 25 Feb 2002 00:44:11 -0800 (PST)
Received: (from kuku@localhost)
	by gilberto.physik.RWTH-Aachen.DE (8.11.6/8.11.6) id g1P8i9G88374
	for freebsd-mobile@freebsd.org; Mon, 25 Feb 2002 09:44:09 +0100 (CET)
	(envelope-from kuku)
Date: Mon, 25 Feb 2002 09:44:09 +0100 (CET)
From: Christoph Kukulies <kuku@gilberto.physik.RWTH-Aachen.DE>
Message-Id: <200202250844.g1P8i9G88374@gilberto.physik.RWTH-Aachen.DE>
To: freebsd-mobile@freebsd.org
Subject: wi0 not found/installed
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


With stock 4.4 I was able to use the wireless lan card (wi0).
Then I cvsuped -current three or four weeks ago and was lost with
wi0 no longer working.

I'm supplying a dmesg output of boot -v and my kernel config file
hoping that someone can help me getting a working wi0 again.

Thanks.

-- 
Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de

dmesg output:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Feb 25 09:15:53 GMT 2002
    root@:/usr/src/sys/i386/compile/KUKUBOOKNEW
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0408000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04080b4.
Calibrating clock(s) ... TSC clock: 996644211 Hz, i8254 clock: 1193143 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
TSC initialization skipped: APM enabled.
CPU: Pentium III/Pentium III Xeon/Celeron (996.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268345344 (262056K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0042f000 - 0x0ffe1fff, 263925760 bytes (64435 pages)
avail memory = 256868352 (250848K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc06e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fac4
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
Using $PIR table, 10 entries at 0xc00fbc20
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: physical bus=0
	map[10]: type 3, range 32, base e8000000, size 26, enabled
found->	vendor=0x8086, dev=0x1130, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
found->	vendor=0x8086, dev=0x1131, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
found->	vendor=0x8086, dev=0x2448, revid=0x03
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
found->	vendor=0x8086, dev=0x244c, revid=0x03
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	map[20]: type 4, range 32, base 0000bfa0, size  4, enabled
found->	vendor=0x8086, dev=0x244a, revid=0x03
	bus=0, slot=31, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	map[20]: type 4, range 32, base 0000bce0, size  5, enabled
found->	vendor=0x8086, dev=0x2442, revid=0x03
	bus=0, slot=31, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	intpin=d, irq=11
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xcfff
pcib1:   memory decode     0xfc000000-0xfdffffff
pcib1:   prefetched decode 0xe0000000-0xe7ffffff
pci1: physical bus=1
	map[10]: type 1, range 32, base fc000000, size 24, enabled
	map[14]: type 3, range 32, base e0000000, size 27, enabled
found->	vendor=0x10de, dev=0x0112, revid=0xb2
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   16
pcib2:   I/O decode        0xd000-0xffff
pcib2:   memory decode     0xf2000000-0xfbffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci2: physical bus=2
	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
	map[14]: type 1, range 32, base f6ffe000, size 13, enabled
found->	vendor=0x125d, dev=0x1998, revid=0x10
	bus=2, slot=3, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1668, dev=0x0100, revid=0x11
	bus=2, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
found->	vendor=0x104c, dev=0xac42, revid=0x00
	bus=2, slot=15, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x104c, dev=0xac42, revid=0x00
	bus=2, slot=15, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base f6ffd800, size 11, enabled
	map[14]: type 1, range 32, base f6ff8000, size 14, enabled
found->	vendor=0x104c, dev=0x8027, revid=0x00
	bus=2, slot=15, func=2
	class=0c-00-10, hdrtype=0x00, mfdev=1
	intpin=a, irq=11
	powerspec 2  supports D0 D2 D3  current D0
pci2: <PCI bus> on pcib2
pci2: <multimedia, audio> at device 3.0 (no driver attached)
pcib3: <PCI-PCI bridge> at device 6.0 on pci2
pcib3:   secondary bus     8
pcib3:   subordinate bus   8
pcib3:   I/O decode        0xe000-0xefff
pcib3:   memory decode     0xf8000000-0xf9ffffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pci3: physical bus=8
	map[10]: type 1, range 32, base f8fff000, size 12, enabled
	map[14]: type 4, range 32, base 0000ecc0, size  6, enabled
	map[18]: type 1, range 32, base f8e00000, size 20, enabled
found->	vendor=0x8086, dev=0x1229, revid=0x08
	bus=8, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base f8ffec00, size  8, enabled
	map[14]: type 4, range 32, base 0000ecb8, size  3, enabled
	map[18]: type 4, range 32, base 0000e800, size  8, enabled
found->	vendor=0x11c1, dev=0x0448, revid=0x01
	bus=8, slot=8, func=0
	class=07-80-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=11
	powerspec 2  supports D0 D2 D3  current D0
pci3: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xf8e00000-0xf8efffff,0xf8fff000-0xf8ffffff irq 11 at device 4.0 on pci3
pcib3: device fxp0 requested decoded memory range 0xf8fff000-0xf8ffffff
pcib2: device fxp0 requested decoded memory range 0xf8fff000-0xf8ffffff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:20:e0:69:17:62
fxp0: PCI IDs: 8086 1229 1668 1100 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci3: <simple comms> at device 8.0 (no driver attached)
pcic0: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 15.0 on pci2
pcib2: device pcic0 requested decoded memory range 0xf2000000-0xfbffffff
pcic0: PCI Memory allocated: 0xf2000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pcic0: PCI Configuration space:
  0x00: 0xac42104c 0x02100007 0x06070000 0x00822008 
  0x10: 0xf2000000 0x020000a0 0x20000000 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b 
  0x40: 0x00a41028 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x3024d020 0x00000600 0x000f0000 0x05033002 
  0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 15.1 on pci2
pcib2: device pcic1 requested decoded memory range 0xf2000000-0xfbffffff
pcic1: PCI Memory allocated: 0xf2001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pcic1: PCI Configuration space:
  0x00: 0xac42104c 0x02100007 0x06070000 0x00822008 
  0x10: 0xf2001000 0x020000a0 0x20000000 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b 
  0x40: 0x00a41028 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x3024d020 0x00000600 0x000f0080 0x05033002 
  0x90: 0x606483c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard1: <PC Card bus (classic)> on pcic1
pci2: <serial bus, FireWire> at device 15.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xbfa0-0xbfaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xbfa0
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xbfa8
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xbce0-0xbcff irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pcic: pcic0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xce800-0xcefff,0xce000-0xce7ff,0xcd800-0xcdfff,0xcd000-0xcd7ff,0xc0000-0xccfff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
adv0 failed to probe on isa0
bt0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 5c 9d 
0b b2 00 6f 0d 0e 00 00 06 90 08 89 8f 28 1f 08 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 5c 9d 
0b b2 00 6f 0d 0e 00 00 06 90 08 89 8f 28 1f 08 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0 failed to probe on isa0
pmtimer0 on isa0
sio0: irq maps: 0xa01 0xa11 0xa01 0xa01
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xa01 0xa01 0xa01 0xa01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
procfs registered
bpf: lo0 attached
bpf: ppp0 attached
pcic1: Event mask 0xf
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <LG DVD-ROM DRN-8080B/1.13> DVD-ROM drive at ata0 as slave
acd0:  512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xc, start 610470, end = 41046074, size 40435605 : OK
ad0s2: type 0xa5, start 63, end = 112454, size 112392 : OK
ad0s3: type 0xa5, start 41046075, end = 49849694, size 8803620 : OK
ad0s4: type 0x85, start 49849695, end = 58605119, size 8755425 : OK
start_init: trying /sbin/init
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 4f
pccard: card removed, slot 1
pcic1: reset 1 int is 10 stat is 4f
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 2 int is 70 stat is 4f
pcic1: reset 3 int is 70 stat is 4f
pcic1: reset 0 

kernel config file:
-------------------
#
# NEWCARD -- efforts at porting newconfig pccard/cardbus code to newbus
#
# This is a new implementation of pccard and cardbus support.  It works
# for many folks right now.  Some folks still have issues.  The support
# around the edges isn't as complete as the previous pccard system.
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the NOTES configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in NOTES.
#
# $FreeBSD: src/sys/i386/conf/NEWCARD,v 1.59 2002/01/15 06:43:59 imp Exp $

machine		i386
cpu		I686_CPU
ident		KUKUBOOKNEW
maxusers	0

#To statically compile in device wiring instead of /boot/device.hints
hints		"KUKUBOOKNEW.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
options COMPAT_OLDISA

options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MD_ROOT			#MD is a potential root device
options 	NFSCLIENT		#Network Filesystem Client
options 	NFSSERVER		#Network Filesystem Server
options 	NFS_ROOT		#NFS usable as root device, requires NFSCLIENT
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
#options 	USERCONFIG		#boot -c editor
#options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# Debugging for use in -current
options 	DDB			#Enable the kernel debugger
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
options 	WITNESS			#Enable mutex checks to detects deadlocks and cycles


device		isa
device		eisa
device		pci
options 	PCI_ENABLE_IO_MODES	# Enable pci resources left off by a "lazy BIOS"

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering


# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc	1	# At keyboard controller
device		atkbd		# at keyboard
device		psm		# psm mouse

device		vga		# VGA screen

# splash screen/screen saver
device		splash

# syscons is the default console driver, resembling an SCO console
device		sc	1


# Floating point support - do not disable.
device		npx

# Power management support (see NOTES for more options)
device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# Pcmcia and cardbus bridge support
#device		pccbb			# cardbus (yenta) bridge
#device		pccard
#device		cardbus
# PCCARD (PCMCIA) support
device		card		# pccard bus
device		pcic		# PCMCIA bridge

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da



# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)

# ISA Ethernet NICs.  pccard nics included.

# Wireless NIC cards
device		wi		# WaveLAN/IEEE 802.11 wireless NICs. 

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp	1	# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message